Construction of Security Room Upgradation of Showroom and Land Leveling in Newly Established Bamboo CFConstruction of Security Room Upgradation of Showroom and Land Leveling in Newly Established Bamboo CFC at BILLAWAR KathuaC at BILLAWAR Kathua

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of excavated earth to the disposal site as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages complete job.

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all carriages complete job.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) all carriages complete job.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) including curing and all carriages complete job.

Providing and laying flooring 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including curing and all carriages complete job.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level excluding steel reinforcement but including curing, centring, shuttering, finishing and all carriages complete job with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, complete job.

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) including all carriages complete job.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) including all carriages complete job.

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) including all carriages complete job.

Add for plaster drip course/grooves in plastered surface or moulding to R.C.C. projections.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars of grade Fe-500D or more Make (Jindal, Panther, Tata Tiscon, SAIL) including all carriages complete job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade including all carriages complete job.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Size of tile 600x600 mm including all carriages complete job.

Providing and fixing of powder coated Aluminium work for doors/ windows/ ventilators/ position including 5 mm thick plain glass/ 12 mm thick Pre- laminated particle board or ACP sheet as directed by Engineer-in-charge including all necessary fitting complete job. (powder coated aluminium section 100 X 50 mm for frames 85 X 45 mm including all necessary fittings & fixutres Grill 2'' X 2" should be only glass pan window shutters)

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete job.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works for Stairs complete job.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete job.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm)

Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete job.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge in cement mortar

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing stainless steel door handles heavy duty for glazed door 16'' length all complete job including all necessary fittings.

Providing and fixing stainless steel glazed door lock of spider make or its equivalent.

Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) and spreading of good earth in required thickness as per directions of officer-in-charge (cost of sludge, dump manureor/ and good earth to be paid separately.

Fine dressing of the ground.

Providing and fixing of 12 mm thick toughened glass fro shelves including all fittings and fixtures with complete accessories. (size of Shelves 1'-6'' x 3'') 34 Nos.

Supply and Installation of 5'-0''X 2'-6'' X 2'-6'' showroom counter table with base and sides of 19 mm water proof by ply including 1 mm thick laminated sheet of approved brand as directed by Engineer-in-charge with 2 nos drawers of the same including top counter with 12 mm thick toughened glass with moulding on all sides complete job at site including all fittings and fixtures.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.

Providing and fixing tiled False Ceiling of specified materials of size 595 x 595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete 40 mm dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore

Providing and fixing C.P grating 4'' dia.

Providing and fixing waste coupling.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes 110 mm diametre.

Providing and fixing on wall face un-plasticized - PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 110 mm bend.

Providing and fixing of floor trap 4'' dia.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge

20mm nominal outer dia pipes

15mm nominal outer dia pipes

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/ Havells/ Vguard/ Polycab/ Finolex . Conduit Make: AKG/ Anchor/ Finolex/ Polypack

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/ Havells/ Vguard/ Polycab/ Finolex Conduit Make: AKG/Anchor/Finolex/Polypack

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Make: Havells/ABB/Legrand/Anchor/vguard/L&T/Schneider)

5/6 amps switch

3 pin 5/6 A socket

15/16 A switch

6 pin 15/16 A socket

Telephone socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.(Make: Havells/ ABB/ Legrand/ Anchor/L&T/Schneider)

3 Module

6 Module

12 Module

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.(Make: Havells/ ABB/ Legrand/ Anchor/ Schneider/Vguard)

supply of pre-wired, fluorescent fitting / compact fluorescent fitting of T5 batten (20 watt) complete with all accessories. as required. (Make: Havells/ Wipro/ Crompton/ Philips/ Panasonic)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/polycab/Anchor/Polypack)

Supplying, Installation, Testing and commissioning of Split Type Air conditioner ( Hot & cold type ie twin cooled- inverter type) of rating 3 star and above including connection, fitting complete job including indoor and outdoor unit. The item is inclusive of outdoor unit wall bracket /stand for mounting of outdoor unit.( Make: Bluestar/Lloyd/LG/Voltas/Hitachi)

Supplying, Installation, Testing and commissioning of 5Kva Voltage Stabilizer with wide working range ( 90/100 v to 290v ) for air conditioning system.( Make: Vguard/Luminous/Microtek/Bluestar) Capacity: 5 Kva

Supplying, Installation, Testing and commissioning of recessed/ surface/ concealed LED Light of 18 watt.( Make: Panasonic/ Philips/ Crompton/ Wipro/ Havells)

Supplying, Installation, Testing and commissioning of LED Light of following wattage complete with drivers and other accessories as required.(Make: Philips/Wipro/Havells/Jaguar)

9/10 watt-focus light/track light with driver and channel

LED Strip light 5mtr

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: VGuard/ Havells/ABB/anchor)

SINGLE POLE

SINGLE POLE AND NEUTRAL

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: VGuard/ Havells/ABB/Anchor/L&T/Schneider)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.( Make: Finolex/anchor/Vguard/Havells)

2 x 1.5 sq. mm

2 x 6 sq. mm

1 x 1.5 sq. mm

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.( Make: Finolex/anchor/Vguard/Havells)

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply, installation,testing and commissioning of Inverter 850 to 900 va with battery 150ah including trolley complete with all accessorries as required.( Make: Microtek/Luminous/Exide)

Supplying and laying & commissioning of 25 sqmm 2 core al. flexible cable /service line including connection as required.(Make: RR cabel/ Havells/Finolex/Polycab/Anchor)

Supply, installation,testing and commissioning of ceiling fan 1200 mm sweep along with fan rod upto 2ft. long suitable for operating 240/230v ac,50 hz including connection,etc complete as required.(Make: Bajaj/Havells/Pansonic/Crompton)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.(Make: Bajaj/Havells/Pansonic/Crompton)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 4 way (4 + 12), Double door

Supply , installation, testing and commissioning of single door Refrigerator of capacity ranging between 182 to190 ltrs of rating 3 star and above complete with allied accessories as required.Make: Samsung/LG/Whirlpool

Supply , installation, testing and commissioning of exhaust fan( Heavy Duty) 300mm size, metallic type suitable for operating 240/230v ac,50 hz including connection,etc complete as required.The job includes cutting, framing of vent out to fix exhaust fan Make: Havells/Crompton/Bajaj/Philips

Supply , installation, testing and commissioning of Vertical type Electric Geyser of 15 ltr capacity with rating 4 star & above complete with all accessories as required. Make: Havells/Hindware/Recold/Jaquar.

Supply , installation, testing and commissioning of water pump self priming type 0.5 hp single phase motor commplete with connections, accessories as required.(Make: Crompton/ Havells/usha)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Hot Dipped Galvanised type.

Supply, Installation, testing and commissioning of single phase Double pole changeover switch of rating 63 amp complete with all accessories as required.( Make: Havells/Anchor/L&T/Siemens)

Supply, Installation, Testing and commissiong of LED Flood light 50w with IP 65/66 including wall mounted/pole mounted GI Angle rod for mounting all accessories as required and as desired by EIC.( Make: Havells/jaquar/Wipro/Philips)

Supply of 09/10 watt LED Bulb.( Make: Havells/Jaquar/ Eveready/ Wipro/philips)

Supply, Installtion, testing and commissioning of size 400to450mm Exhaust fan metallic type ( Heavy Duty) complete with all accessories as required. Make: Havells, Crompton, Usha, Bajaj

Providing and fixing of 200/250mm shutter type exhaust fan complete with all accessories as required. Make: Havells/crompton/usha/bajaj)

TIKKA SHARMA

Rajesh Kumar

SANDEEP KHAJURIA