Construction of Ward Office near Raghunath Jew Temple Telenga Bazar in Ward No. 28.

Earthwork in excavtion of foundation in all kinds of soil within initial lead and lift including dressing and levelling the bed and depositing the soil as directed

Filling in foundation trenches, plinths, sites of foundation, in the space below the grade level slab and other underground structures with good quality river sand (inclusive of cost, conveyance, royalties, taxes, loading and unloading) laying in layers not exceeding 225mm in thickness, filling, watering and compacting ramming, in each layers or complete as per specification, drawing and direction of the Engineer-in-Charge

Cement concrete (1:3:6) with 4cm. Size crusher broken häard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete

Fly ash bricks of 25cmx12cmx8cm Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2% percentin cement mortar (1:6) in foundation and plinth

Providing Cement Concrete forR.C.C works of (M-20) using 20mm size down graded crusher broken hard granite (CBHG) stone chips of approved quality & from approved quarry on the road surface including cost of labour, materials (inclusive of cost, conveyance, royalties, taxes, loading & unloading) & equipments for handing, transportation, batching, mixing, placing in position /layers, vibrating, curing for 28 days complete as per specification drawing and direction of the Engineer-in-charge. A) R.C.C. FOUNDATION & COLUMN BASE.

R.C.C. PLINTH BEND

R.C.C. LINTELS

R.C.C. BEAM & COLUMN

R.C.C. ROOF SLAB

R.C.C. CHAJJA

Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up MS Rods/Tor Steel/deformed rods etc. including hoisting. placing in position, tying the grills binding with 18 to 20 gauge binding wire required for R.C.C work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wire will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S rods or Tor steel linear measurements of rod for finished item of works. 5% wastage and lap length are included in the finished rate).

Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%, percentin cement mortar (1:6) brick masonary in super structure

Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete.

12mm thick cement plaster (1:6) on brick work racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties taxes of all materials, cost of all labour T&p etc, as per direction of Engineer in charge. (Ground Floor Internal)

12mm. thick cement plaster (1:3) on brick work with punning

6mm thick cement plaster (14) to R CC surfaces finished smooth including deep chiping and slury treatment.

16 mm. thick cement plaster (16) over brick or stone masonry work racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties taxes of all materials, cost of all labour T&p etc. as per direction of Engineer in charge. (External)

2.5cm, thick grading concrete (1.2.2) on roof slab with 6mm. Size on new work crusher broken Granite chips

Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to 15 13755 laid on 20 mm thick cement mortar 1.4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge. (For new work only)

Antiskid Floor Tile (Make Johnson/Khajaria/Somali)

Digital Wall Tile (Size 300mmX450mm)

Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams, including 0.05 cost of all door fittings and fixtures etc. complete.

Supplying, Fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1 mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete

Supplying, fitting & fixing of two track UPVC Sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures complete as per direction of Engineer in Charge.

Supply, fitting and fixing of Rajashri moulded PVC solid flush door frame with shutter having water and termite proof etc. including cost of hardware fixtures etc. all complete as per direction of Engineer in Charge.

Steel work welded in built up sections/framed work, including cutting, hoisting. fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Finishing plastered surfaces of walls with Berger Synthetic putty (interior) & marking smooth to receive painting including cost of labour & Material including primer

Providing weather coats two coats with approved quality and shade over a coat of primer over plastered surface with brush including cleaning the surface watering curing cost of cement paint taxes labour charges T&P etc complete as per the direction of Engineer in charge.

Wall painting 2 coats with Plastic Emulsion Paint of approved shade on new work to give an even shade in Ground Floor.

Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete in Ground Floor

Remove excavate materials from the site by mechanical means with loading and unloading the same within 5 kms lead as per direction of enginner in charge

PH Material Cutting Hole in 250mm to 375mm thick wall thick Brick Wall for taking 110mm/160mm dia PVC Pipe and mendig good to damages after completion 4.00 e of Work etc. Complete.

Providing & Fixing of AIWC with integral P trap inclusive of ciestern, seat cover all complete set confirming to IS 2556: Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification.

Providing 100 mm size P or 5 trap (with Horn or without Horn) for water closet Squatting pan including jopinting the trap with pan in cement mortar 1:1 as per specification etc. complete.

Providing & fixing to wall, ceiling ands floor the pipe fittings of following nominal bore with clamps including making good the wall ceilling and floor, all complete in ground floor including the cost of material as per the PHE specification and direction of the Engineer in charge (Sch-80, ASTM-D 1785/2004). 15 mm dia UPVC pipes

25 mm dia UPVC Pipe

40 mm UPVC pipe (considering 10mtr distance of main pipe line)

Providing, fixing, fitting of the following Brass/ Gun metal/ Chromium plated fitting of approved make (Conforming to respective 1.5 Specification) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer in charge. (Plaza/ciser/Zigma), 50mm x 800 mm long PVC Urinal waste pipe.

15mm dia C.P Concealed stop cock

25mm PVC Ball valve

C.P Gratting

15 mm dia C.P pillar cock

15 mm CP 2 in 1 Bib cock

CP Health Foucet with 1.0 mtr PVC Tube

32 mm C.P Waste

15 mm x 600 mm PVC Connection Pipe

40mm UPVC-ASTM Ball Valve

CP Urinal Push Cock 15 mm dia

10 Ltr PVC low level Cistern with fittings-Colour

EWC Standard Seat Cover (Colour)

32 mm PVC long Flush bend

C.P. glass self with glass

C.P.revolving shower with arm (overhead)

C.P. towel rail. (600x20)mm

C.P. towel ring

C.P.soap holder/disc.

C.P. toilet paper holder

Standard Pedestal Wash Basin

Fixing 600 mm x 450 mm Bevelled edge mirror of superior glass mounted on 6 mm thick A. C Sheet or Plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per Specification.

Providing, Fitting, Fixing of PVC SWR pipe of standard manufactures including all jointing, earthwork in excavation of trenches in all kind of soil up to a depth of 0.90 mtr and refilling the trench in 0.30 mtr layers duly watered and rammed or fixing to walls with supply of nails, bobbings, wall plugs all complete as per the PHD Specification and the direction of the Engineer-in-charge. (110 mm dia PVC SWR Pipe S/S)

110 mm PVC Door bend

110 mm PVC plain Bend

110 mm PVC SWR Cowel

75 mm PVC SWR Pipe

75 mm PVC SWR Bend

Supplying of all materials, Labour, T&P and fixing of Rotational moulded polyethylene cylindrical vertical water storage tanks(3 Layer White, 1000ltr) conforming to 15 12701-1996 as per requirement including conveyance of all 1.00 materials to work site etc all complete as per specification and direction of the Engineer-in-charge

Making signboard, Photography and other uforseen item Le. nonplastic in between slabs and road etc labour engaged complete

Supplying of all materials, Labour, T&P and fixing of Acrylic sign board with LED s (inside) as per specification and direction of the Engineer-in-charge