AR MO to various non residential buildings under Division NO.III Shimla.SH Repair renovation of general toilets Male and females in 3rd floor of Block C Architect Branch at Nirman Bhawan building shiml2.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping Suspended floors, roofs, landings, balconies and access platform

Edges of slabs and breaks in floors and walls under 20cm wide

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 cement :1.5 coarse sand) : 3graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., 600 x 600mm

Providing and laying double digital Vitrified tiles in different sizes(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete 1200x600 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing CPVC pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore

P/F PVC P- trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete a) 110 mm

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete a) 110mm dia.type B

Providing and fixing PVC single equal branch plain ISI marked etc complete 110 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete. 110 mm dia

Providing and fixing PVC door bend ISI marked including fixing with approved adhesive etc complete. 110 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete. 110 mm dia

Providing and fixing PVC degree bend ISI marked including fixing with approved adhesive etc complete. 110 mm dia

Providing and fixing gate valve 15mm nominal size

Providing and fixing water closet squatting pan (Indian suitable for use as squatting pan or European type water closet single piece set cat no OP-19S BATHSENSE MAKE one piece complete

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste o fstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm Jaguar make cat no BATHSENSE MAKE TT-23-X

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. FP-22X BATHSENSE MAKE

Providing and fixing central hole mixer of quality & make as approved by Engineer in charge. Of 15mm nominal size ESS ESS MAKE CAT NO T-118

Providing and fixing ESS ESS stop cock of approved colour and quality T-112

Providing and fixing uplasticised c.p connection pipe with brass unions :15 mm nominal bore 45 cm length VIKING MAKE

Providing and fixing C.P. grating for floor or nahani trap with hole viking make cat no 40906

Providing and fixing CP waste coupling 32mm Dia for wash basin & urinal including carriage of materials within all leads and lifs ess ess make 230b

Providing and fixing Polyvinyl Chloride(PVC) waste pipes 32mm Dia for wash basin or sink including carriage of materials within all leads and lifs cat no 4921

Providing and fixing BIB COCK ESS ESS MAKE make Cat no T-101

Providing and fixing extension nipple 1'' including carriage of material withhin all leads and lifts

Providing and fixing bevelled mirror 600 x450 mm ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing SOAP DISH cat no ac-303 complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing jaguar make cat no S1-TP-101 TOILET PAPER HOLDER complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing jaguar make cat no S1-TW201 towel ring complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing jaguar make cat no S1-TW101 towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

Providing and fixing heath faucet JAGUAR MAKE CAT NO ALD-CHR-573

Providing and fixing Soap dispenser viking make

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing bathsense make Cat No.ur-21- LS WITH SPREADER white vitreous china flat back half stall urinal of size 37.5cm x 39cm x59cm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern complete including carriage of materials within all leads and lifts.

Providing and fixing clamp for urinal pot viking made cat No.6353 including carriage of materials within all leads and lifts.

Providing and fixing viterous china urinal divisional plate of size 75cm x 16.5 cm x36.5cm cat No. HSIL Cat No.61005 including carriage of materials within all leads and lifts.

Providing and fixing CP sink mixer of quality & make as approved by Engineer in charge. Of 15mm nominal size

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x510 mm bowl depth 200

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plaster surface to prepare the surface even and smooth complete

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.40mm thick 2nd class deodar wood.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge.

Providing and fixing SS handles with screws etc. complete: 200 MM

Providing and fixing ACP sheet 4mm thick in panelled and glazed door shutter and partition fixed with self drilling screws etc. complete by the Engineer-in-Charge including carriage of materials within all leads and lifts.

Painting wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Painting wood work with Deluxe Multi Surface Paint to give an even shade. one or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture