PROVN OF CERTAIN MINOR AND REVENUE WORKS IN THE AREA OF AGE B/R-II, AGE E/M (EAST), AGE E/M (BHDC) AND AGE B/R (BHDC) UNDER GE (EAST) DELHI CANTT-10

Amount

Demolition of Brickwork of stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Demolition and breaking up 150 mm dia pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

Dismantling water tanks exc 500 Ltrs but not exc 1000 ltr capacity and removing from site.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm and refixing or resecuring in same opening complete.

S&F aluminum powder coated grill section 5 to 6 mm of square/diamond shape having picth size of mesh 75x100 mm etc complete all as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One) vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose) Area not exceeding 2.00 sqm each .

M&L of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in CM 1:3 of cement concrete 1:2:4 type BO as required including dismantling of existing ceiling board :-. (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25x25x1.0 mm (b) S&F of 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers(c) S&F 25 x25 x1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . ( d) S&F E-board 4mmthick self design type ceiling tiles of size 595mm x 595mm conforming to relevant IS on squares of GI Powder coated Tee with clips made to shape including taking down. Shade and pattern of E- board shall be as approved by GE.

Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified.

All same as per srl item No 15 here-in-before but 10mm thick CM 1:4 as in backing coat for dado/skirting complete all as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified.

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter concept in matching pattern of size 600X 300X 7 to 8 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

M&L brick work with sub class 'B' st or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surfaces.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface (internal) etc. on wall finished even and fair all as specified.

M&L for 15 mm thick external rendering on brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately as supply only)

M&L for Preparation of new/old plastered surfaces of walls and applying two coats of exterior emulsion paint (Weather Coat) over a coat of exterior primer priming paint etc complete all as specified and directed.

M&L Preparing new plastered surfaces of walls and applying two coats of OBD over a coat of primer and layer of 1 mm thick JK Birla wall putty complete all as specified

M&L for two coats of OBD on ceiling surfaces over one coat of interior primer including preparation complete all as specified and directed.

Supply only water proofing compound.

Wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking down existing roof treatment with mud puska of any type and also taking down cement plaster on concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc, to receive further treatment, complete all as specified and as directed.

Taking down cement plaster on brick wall including raking out joints hacking for key scrubing down with water etc

M&L for PCC 1:3:6 type C1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof rop surface finished even and fair complete all as specified and directed.

M&L for 5mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and fair complete all as specified .

M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) mixed with WPC complete all as specified and dierected. (Note : WPC shall be measured and paid separately as supply only).

M & L for priming over roof surface @ 0.25 Ltr/Sqm over a cleaned roof surface and applying one coat of bitumin painting with hot blown grade bitumin 85/25 @ 1.20Kg/ Sqmtr and laying of APP based polymetric membrane minium weight 3kg/ sqm and minium 3mm thick reinforced with polyster non wove febric (wt not less than 150gms/ sqm) land on primed surface by forced application complete all as specified and directed. Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only. (2) Authorised Applicator shall be approved by GE befor starting the work. (3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Cgarge for his verification of material. Engineer-in-Cgarge shall deface the original purchage vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofingtreatment for a period of Eight years i fevour of GE. A sum equivelent to 2.5% ( Two point five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's duues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer.

Taking up or down steel tubing 15 mm bore and connection and removing from site.

Taking up or down steel tubing 20 mm bore and connection and removing from site.

S&F 15mm bore steel tubes medium grade in any size or length galvanised with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed by Engineer-in-Charge

All same as per item No 33 here-in-before but 20 mm bore.

S&F in repair for 15 mm dia fancy type CP bib taps half turn with wall flange with screwed down, screwed for iron pipe or for brass ferrule including cap. (Make: Jaquar/ Marc/ Kohler)

S&F in repair 15 mm bore fancy type angle valves half turn chromium plated with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete. (Make: Jaquar/ Marc/ Kohler)

S&F in repair sheet glass shelf assembly consisting of .mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S & F in repair CP Toilet Paper holder with flap guard complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair CP towel rail complete all as specified & directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair CP Brass soap dish complete all as specified & directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repair Corner Glass Shelf 300 x 300 mm radius consisting of 5.5mm thick sheet glass with chromium plated brass brackets with two No CP Railing in each set complete all as specified and directed. (Make: Jaquar cat part No ACN-CHR-1173 or equivalent in Marc/ Kohler)

S & F in repair CP Health Faucet with 1.00 Mtr long CP Flexible pipe as per approved sample complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repairs vitreous china wash down extended wall mounted water closet pan(Italian collection) white/colored cascade type (Integrated Model) including vitreous china flushing cistern, flush pipe, PVC seat cover with 'P' or 'S' trap complete all. Make : Hindware Cat No 192055 or equivalent in Jaquar/MARC/Kohler

S&F 600mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge

S&F of 1000 ltr.capacity rotational moulded polye-thylene water storage tanks three layered (cylindrical vertical with closed top) hoisted & fixed in position incl tank nipple stop cock (15mm bore) and float valve with iron rod and PVC ball (PTMT 15mm bore) all as specified in SSR Part-I complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe.

S&F PVC (SWR) floor/Nahani trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F PVC (SWR) pipes, 110 mm bore double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm bore complete all as specified

Dismantling 100 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in loose soil

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L for cement concrete Type-D2(1:4:8)(40 mm graded aggregate in foundations, filling and mass concrete complete all as specified.

S & F Grinding and polishing of of existing kota/Marble stone floor as specifications and as required as per Engr-in-Charge.

S & F Venetion Blinds with Fabirc vertical/ horizontal including blind control rod, wand, hook, end cap, toggles etc complete. (Make: Hunter Douglas/ Vista Levolor or equivalent as approved by GE).

S&F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty, locking arrangement “GODREJ”, rubber gasket and door stopper complete.

M & L for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish to a distance not exc. 50m complete all as specified.

M & L 18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over and including 15mm thick screed bed in CM (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab after dismantling of existing granite/stone slap of any type and size.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams , sides and soffits (if any) foundation and plinth beams and similar work vertical or to batter fair finshied surfaces of concrete complete all as specified.

S&F Joist, channel, angle, or tee sections, fixed independently , without connection plates, etc. ( cut to ordinary lengths i.e within 20mm of the length indicated) conforming to Fe-290-(Gde E- 165) complete all as specified .

M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150mm bore pipe line complete all as specified.

S & F in repair vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F VANITY MADE OF 18mm HDHMR BOARD of size 580x450x680 mm with mirror cabinet of size 500x700 mm with table top basin complete all as specified and directed (Make:- Amara in Parryware cat part of main cabinet C-896146, mirror cabinet C-896G46 and wash hand basin C896H1C or equivalent as approved by GE).

S&F Suspended Gypsum board ceiling works in decorative steps including vertical/sloping members includes with GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) alongwith perimeter of nailing screw fixed in brick wall/RCC with the help of nylon seelves and screws at 610mm centre, then suspending GI intermediate channels of size 45mm (0.9mm thick with two flange of 15mm each) from the soffits at 1220mm centre with GI cleat and steel expansion fasteners, ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm centres, 12.5mm tapered edge gypsum board conforing to IS 2095 (1982) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centre,. Screws fixing is done mechanically either with screw driver or drilling machine with suitable attachment finally the board are to be jointed and finishing the tapered and square edges of the boards are to be joints compound, joint fiber tape including dismatling of old false ceiling any description , including two coat of OBD over a coat of interior primer complete all as specified and directed. Cost of gypsum board is incuded in quoted rate. (Note :- Details of fixing & material will be got approved by GE before commencement of work).

S &F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & draw-ing.

S&F Urinal spreader of CP any colour for fixing with 15mm dia pipe.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, Complete all as specified and directed

S & F Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed.

Dismantling of Plain or corrugated asbestos cement sheeting in roof coverings, complete all as specified and directed.

S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete as specified and directed

M&L Preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.

S&F in repair Stainless steel Curtain Rod 20 mm dia with holders fixed to wall etc complete all as specified and as directed.

S&F in repair Stainless steel fancy type bracket with new screws for curtain rod complete all as specified and as directed.

S&F PVC (SWR) vent cowl of size 110mm bore, complete all as specified.

S&F stack clamps out of 50mm by 5mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 110mm bore of pipe, complete all as specified.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed.

Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement,Inc taking down complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paverblock any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey Cement and pigment.

M&L Sand filling under floors or in foundations including watering and consolidation

Taking Down Wall panelling and similar work

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.

M&L for 1st/Premium quality glazed ceramic digital coloured tiles with highlighter and spacer concept in matching pattern of size 1200 X 600 X 8 to 10 mm thick as in vertical surfaces such as skirtings, dados etc set & jointed in neat cement slurry & pointed with white or coloured cement to match the shade of tiles over and incl 10 mm thick backing coat in CM (1:4) complete all as specified and directed.

Supply only Stainless steel thali basket (11-13 division) of size 37cmx53.5cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 5873 or equivalent in IPSA/HETTICH )

Supply only Stainless steel Plate basket (11-13 division) of size 37cmx53.5cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 5872 or equivalent in IPSA/HETTICH )

Supply only Stainless steel Cutlary basket of size 37cmx48.5cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18''/20'' length two way extruded MS galvanised over rollers of approved (Make: Godrej Product Code 6160 or equivalent in IPSA/HETTICH )

Supply only Supply only Stainless steel basket (plain) of size 370mm x 535mm x 150mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved . (Make: Godrej Product Code 5851 or equivalent in IPSA/HETTICH )

Supply only Stainless steel bottle full out of size 150mm x 485mm x 430mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved (Make: Godrej Product Code 6169 or equivalent in IPSA/HETTICH )

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and dircted .

S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 15 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed by Engineer-in-Charge

S&F steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors, bore of pipe 20 mm dia.including making hole in RCC slabs for vertical pipes & making good the same with Cement Concrete I:2:4 complete all as specified and as directed by Engineer-in-Charge

M&L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 in brick or stone wall , cutting not exc 10cm girth complete.

Dismantling water tanks exc 250 Ltrs but not exc 500 ltr capacity and removing to store.

S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore including taking down old unsv existing tank as specified and directed

S&F in repair CP towel ring complete all as specified & directed (Make : Cera Cat No 5004105/Hindware Cat No 880007, Somany Cat No 230703 or equivalent as approved by GE)

S&F in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. Cat part No:-. BSSBSD-52 of Make Blue Star or equivalent model of specified makes as approved by GE.

S&F in repair 15 mm bore brass CP single lever Sink mixture for Mixing Hot and Cold water fixed as per manufacture’s manual, with long shunk and cup washers, screwed both ends for iron pipes or for unions complete all as specified and directed (Make : Jaquar Cat Part No. LYR-38309 or equivelent in Marc/ Kohler).

S&F in repair 15 mm bore fancy type Two Way angle valves half turn chromium plated fancy type with wall flange screwed down high pressure screwed both ends for iron pipes or for unions complete all as specified and as directed by Engineer-in-Charge (Make-Jaquar/Marc/Kohler)

S&F 450 mm long PVC connection with stainless steel armed 15 mm bore with nuts complete all as specified and as directed by Engineer-in-Charge

M&L Aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.

S&F powder coated two track aluminium (glazed/ gauged) window shutters sliding type incl 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even by applying 3 mm thick wall care putty complete all as specified and directed.

M&L for 15 mm thick rendering consisting of two layers, first layer 10 mm thick in CM 1:4 and top layer 15 mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. (Note: WPC shall be measured and paid separately under relevent items of this Sch/ BoQ as supply only)

M&L for prepration of new plastered surfaces of wall and applying of Birla/JK white wall putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed.

M&L for preparing new plasteres surfaces and applying of Birla/JK white wall care putty approx 2 mm thick as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint over a coat of primer of walls Surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in floor sub base complete all as specified and directed.

M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bed in CM 1:6 incl removing tiles to defence land and rubbish off the permises complete all as specified.

All same as per srl item No. 119 here-in-before but on vertical surfaces such as skirting / dados with and including 10 mm thick CM 1:4 as in backing coat complete all as specified.

M&L for Use and waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintel beams/lintel band, cantilever and similar work rough finished surface of concrete complete all as specified and directed.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete.

S&F MS TMT steel bars 5 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F MS TMT steel bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F for Glazed ceramic coloured tiles in vertical surface 450x350x7mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cm 1:4 complete.

Demolition of Reinforced cement concrete of any size thickness not exc 15 cm below or above ground level complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and as directed.

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces built in CM 1:6 finished even and fair complete all as specified and directed

M&L complete removal of existing treatment on old surfaces and applying one coat of distemper oil emulsion on ceiling over a coat of alkali resistant priming paint complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 300x600x8mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 10mm thick cement plaster in CM 1:4 and finished the surface of plaster rough complete all as specified and directed by Engr-n-charge

S&F wooden lead lined door with frame manufactured out of hardwood Mirandi/Teakwood of normal section 120mmx70 mm with 2mm sandwiched lead sheet,2mm(+-1%) Lead sheet with 99% purity,total door shutter thickness with conmmercial ply on both side & board will have 43mm thickness (with additional laminate shutter thickness will be 45mm)and with hardware having stainless steel ball bearing hinges(100x89x3mm),door closer -heavy duty only for 80kg weight capacity,door coordinate recommended,exposed tower bolt,mortise sash lock with half cylinder estucheon -complete set with D shape pull handle side & push plate SS 304 grade on push side,with optional hardware having auto drop down door bottom non mortise/surface mounted,optional lead lined door sill to cover the gap b/w finished floor and door shutter ,lead lined architrave to be used if reqd with recommended finishes on frame(primer and paint ,teakwood :polish finish),door shutter(both sides laminate/veneer), all complete as per approved drawing & direction of Engineer-in-Charge.

S & F custom radiation shielding glass (RSG- 900x900mm), with radiation shielding glass,having a wide array incl lead lined window frame,high quality 16 guage cold rolled steel,compliant with ASTM A 366 std for durability and reliability complete all as specified and as directed by Engr-n-charge. (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories.)

Supply and fixing in repairs of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required complete all as specified and directed by Engr-n-charge. (Note: Only front face shall be measured and paid irrespective of area of HDHMR boards provided and fitting as required shall be deemed to be included in unit rate quoted)

M&L for PCC 1:2:4 type B1 using (20 mm graded aggregate) 70mm thick as in paving complete all as specified and directed by Engr-n-charge

M&L for RCC 1:2:4 type B1(20mm graded aggregate) 70mm thick as in slab supported on walls,beams& column in floors, roofs, landings, balconies, canopies, deck slabs and shelves and the like complete all as specified and directed by Engr-n-charge

M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes complete all as specified and directed by Engr-n-charge

S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm etc ( Any Design & pattern as approved by GE) complete all as specified and directed by Engr-n-charge

M & L for PCC 1:2:4 type B-2 40 mm graged agg in Posts, pillar, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified.

M&L for PCC (1:3:6) type C-2 (40 mm graded aggregate) as in drain/Channal and mass concrete complete all as specified and directed.

M&L for 100mm PCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in Sub base complete all as specified and directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F steel tubular Column, Rafter,Purline etc including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979gradeSt- 240.

S&F MS plate (plain or chequered ) channels ,square cut or notched ( oridinary and counter sunk) forming holes , w/o any attatchment.

M&L for mild steel bolts purpose made with hexagonal or square head one end each screwed other end to be fitted with washers and one hexagonal or square nut. Dia 16mm and 60 cm long.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for two coat of Cement base paint over a coat cement of primer on new surface of wall including preparation of surface complete.

M&L for Cement Concrete in CM 1:3:6 type C1 as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches, Sockets, holders, ceiling roses, light fitting regulators etc (to be measured and paid separately under relevent item of this Sch as S&F in repair and credit for these item given in credit schedule here-in-after) and making good the disturbed surface all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly including Metal Flush Box, Cover plate with frame, cutting chases and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per srl item No 151 here-in-before but for one socket outet point 5 amps on the same board..

All as per srl item No 151 here-in-before but for one socket outet point 5 amps on the independent board.

All as per srl item No 151 here-in-before but with 2.5sqmm cable on independent board.

S & F in replacement Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S & F in replacement modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F in replacement modular Socket, 16 Amp, multipurpose , 02 module size complete all as directed.

S & F in replacement Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S & F in replacement Modular Fan regulator step type ,120 watts, complete all as directed.

S&F in replacement Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as directed.

S&F in replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire in and including PVC conduit of size 25 mm dia medium grade and conduit fitting such as tees, bends, elbow, reducers etc complete all as directed.

Material and labour in replacement submain wiring complete with 2 x 10 sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm as earth wire through existing PVC concealed conduit complete all as directed.

Supply and fixing in replacement 25 mm PVC conduit exclusive of boxes (Junction/ Terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as directed.

S & F in replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.

S & F in replacement LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed.

S&F in replacement of Recess/ Surface mounting 2x2 square flat panel ultra slim scoop LED light 36/40 W warm/cool white with driver/transformer etc suitable for Grid ceiling/ Gypsum board/POP ceiling incl making electric connection complete as as directed.

Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.

S&F of Exhaust fan 450mm sweep single phase heavy duty (inbuilt gril), fixed in wall with proper nuts & bolts as reqd and depositing the old u/s to MES store yard complete all as directed.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Supply and fixing of Geyser 25 ltr capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and CP and PVC connection for water inlet ,outlet and depositing the old u/s to MES store yard complete all as directed.

S & F in replacement of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing in street light fitting bracket, 01 mtr long made out of galvanized iron pipe of 25mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, complete all as directed.

S&F of ceiling fan (BLDC) 1200mm sweep, Copper winding, 5 Star rating,white, 240 Volts.and depositing the old u/s to MES store yard complete all as directed .

Supply and fixing in replacement of MCCB incommer Distribution Board (Vertical Load line DB) double Door made out of CRCA mild steel surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amp, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections complete all as specified and as directed.

Material and labour in replacement SPN DB with double door 8 way, 240V with busbar 200A rated,making all electric connections complete all as specified and directed.

Supply and fixing in replacement of MCCB 3 pole ,415 V Adjustable type 100Amp with breaking capacity 16KA. complete all as specified and as directed.

S&F in replacement of SPN Isolator, 40 Amp, 240 Volt. complete all as specified and directed.

Supply and fixing in replacement of MCB 'B ' Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

S&F in replacement of LED bulk head fitting 10 watt made of cast aluminium alloy with opal glass diffuser complete all as specified and directed.

Supply and fixing in replacement of galvanized iron pipe of 40mm dia size medium grade with related accessories ,complete all as directed.

M&L in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volt, size 6sqmm 2 core complete all as specified and as directed. .

M&L for sand cushioning to under ground cable provided with layers of sand(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed

Taking down exhaust hooder fabricated out of PCZ sheet keeping in safe custody and refixing after repair work complete all as specified and as directed

M&L for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick buried directly in ground not less than 2.25mtrs below ground level, with top edge of the plate not less than 1.5mtrs deep below normal ground level, connected to galvanised earth wire 4mm by means of bolts, nuts to earth test point incl necessary PCC 1:2:4 type B-1, cover frame, GI pipe 15mm dia light grade for protection of earthing lead and GI pipe 20mm dia for watering pipe with funnel, wire mesh, salt, charcoal dust and exc complete all as specified and as directed directed.

S&F of Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed. Note-For extension connection of pc system etc.

S & F in replacement of Modular white cover plate with frame 12 module all as directed

S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed.

M&L in replacement for Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked including PVC concealed conduit 25 mm dia with all fittings and including 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed.

S&F MCCB 3 pole of capacity 125A, 10KA ics 100% with thermal magnetic release including spreader/thimble of suitable size and making connection complete all as specified and as directed.

S & F in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.

Taking down of ceililng fan any type size complete with blades, fan clamp etc and depositing to MES store yard after dismentling blade complete all as specified and as directed.

S&F BLDC (Brushless Direct Current) Ceiling Fan, 1400 mm suitable for regulator, not less than 6 service value , voltage 220V,having full copper motor winding & ribbed 3 Nos A/M blades. The fan shall have BEE 5 star rating and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.

All same as per srl item No 194 here-in-before but 1200mm.

S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to mes store yard, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core.

S & F of Galvanised steel tubing light grade of size 40mm bore with all fittings for passing cable complete all as specified and directed.

Supply and fixing of ceiling fan J hook fabricated out of MS flat 25 x 5mm thick complete

Supply and fixing of Geyser 25 ltr capacity vertical type with steel tank and glass inner linen , 5 star rating complete.

Supply and fixing of steel wired connection 600mm long and CP brass adopter 15mm dia with washer for geyser of any type/ make and capacity complete.

S&F steel fastner of 4" long and 8mm dia with nuts & washer complete all as specified and as directed.

Supply and fixing exhaust fan upto 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard.

M&L for servicing of split AC of 1.5/2.0 TR capacity of any type/ make at site /wall, including removing power connections and front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, cooling unit and condenser coil of outdoor unit, checking and making serviceable electrical connection of DB's stablizer, wiring of AC's as per site condition and tighening all electrical connection with thimble and replaceing the spare parts of the AC units wherever required, testing & commissioning including refixing at the original position and connecting with the system complete all as specified and as directed by Engr-in-Charge. Note: (i) The cost of additional inlet/ outlet copper pipes, drain pipe and electrical cord, if required and making good of surface as original by plastering/ whitewash/ colour/ distemper etc shall deemed to be included in quoted rate and no extra payment shall be made to contractor on this account. (ii) Spare parts required for repairs shall be measured and paid separately under respective item of this Schedule.

Supply and fix copper pipe of 1/4" size as per requirement for inlet and outlet with nitrile insulation complete.

Supply and fix copper pipe of 1/2" size as per requirement for inlet and outlet with nitrile insulation complete.

Supply only in replacement PVC insulated, multi stranded, 3 core flexible, copper conductor cable of size 2.5 sqmm complete

Supply and fix drain pipe of suitable size as per requirement complete

Supply in replacement of PCB, suitable size asa per requirement complete

Supply and charging R-22 refrigerant gas, including and after carrying out the pressure test with nitrogen and rectify the leakage of split AC/Window AC/ Water Cooler/ Tower AC/ Cassette AC complete all as specified.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete. (Make: Legrand/ Seimens/ Schneider/ L&T)

M&L for submain wiring with 2 runs of 4.0 sqmm single core, PVC insulated & unsheathed (FR) cable 1100 Volts grade with multi stranded, copper conductor including PVC casing caping as per ISS and one run of 4.0 sqmm size PVC insluated copper conductor complete all as specified and as directed. (Make: Havells/ Finolex/ Polycab)

M&L for shifting of split type AC of any capacity, any type type/ make with stablizer including taking down carefully indoor and outdoor unit, suction and delivery with insulation, drain pipe and re-fixing arrangement i.e. lifting angle, fasteners, nut bolts, washer, etc testing & commissioning complete all as specified and as directed.

S&F in replacement of fancy wall light fittings with lamp complete all as specified & directed Make :- Havells Cat No LHFOFTE1TZ1Q012 or equivalent in Bajaj/CG

sony engineering works (BID ID -3102628)

VIJAY KUMAR GUPTA (BID ID -3102589)

Akhil Enterprises (BID ID -3117439)

MAA SANTOSHI ENTERPRISES (BID ID -3098581)

M/S Rohit Enterprises (BID ID -3102115)

tarun construction co (BID ID -3100855)