Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Responsive |
Tender Value
₹5 L
EMD Value
₹10,000
Closing Date
7 Mar 2026, 2:00 pmClosed
Executive Engineer ED Sumbal
Office of the Executive Engineer ED Sumbal Near Irrigation Colony Sumbal
Installation of High resolution Lights at Play Field Nowgam under APDS scheme
2026_PDD_301637_2
EDSbl 34 of 2025-26
Open Tender
Electrical Works
Turn-key
45 days
sumbal
as per sbd Enclosed
7 documents required · 7 mandatory
₹500
Executive Engineer ED Sumbal
₹10,000
Yes
16 Mar 2026
21 Feb 2026
7 Mar 2026
21 Feb 2026
7 Mar 2026
21 Feb 2026
Pole mounted Light
Supply , Installation , Insurance, testing and Commissioning with transportation at site of polygonal shape 12.5 mtr High mast pole (BPP/Utkarsh/Bajaj/phillips/Havells or Equivalent make) with its accessories Suitable for Stadium flood lights. Mast shaft shall be in two equal sections, made from H.T. Steel of grade BSEN10025, hot dip galvanised and suitable for wind speed as per IS 875. The mast should have the provision for lowering and raising the lantern carriage by using winch system having 2/3 way wire ropes. Luminaries wiring matrials are included in the mast supply price. Technical Specification:- Bottom dia 360 mm, top dia 150 mm , bottom section thickness 4 mm and top section thickness 3 mm, Bottom section length 6500 mm, Top section length 6500 mm , Overlap between sections 500 mm, Baseplate 540 mm dia, baseplate thickness atleast 25 mm with hole dia of 26 mm. Foundation bolt size 24 mm dia, Bolt length 850 mm (J type). Wire rope 6mm SS 304 grade. An adequate door opening of min. 1400x300 mm shall be provided at the base of each mast to permit clear acess to equipments like winches, cable plug ,socket etc. The design life of the mast shall be min. 25 years. The offered High mast shall be a tested design. The min. average thickness og galvanization should be not less than 65 microns. Test certificate to be provided
Construction of suitable shallow foundation with 1:2:4 or M20 grade concrete for the high mast considering the safe soil bearing capacity. The contractor shall be responsible for the design of the foundation. The load bearing capacity of the soil shall be assertained by the contractor before designing the foundation.
Providing and fixing of IP66, 250 W LED, 2200Lumens/watt LED flood light fixtures complete ( BPP/Utkarsh/Bajaj/phillips/Havells/Kecelec or equivalent make) IP 65/66 Beam angle 150to 160 degree (OP-VOL ,90V to 305 V . average life 50000 hours . PF > 0.9 Lum Test certificate to be provided
Providing and fixing of double door MS feeder piller box near the high mast tower having: i) 63 A DP MCB- 01 No ii) 6 A SP MCB- 16 Nos iii) Astronomical switch with contactor- 01 No iv) 200 A Cu bus bar- 01 No The panel shall be 16 SWG IP 54 suitable for outdoor application complete with suitable stand which shall be fixed with cement concrete. 5 kVA, (OP 200V-240v +- 5% IP 90to300 V, 10w . Vol 90v , HV cutoff 280v) 1 phase dry type AVR shall be incorporated in the pannel. Switch gear make (Legrand/L&T/C&S/Havelle).
Supplying and erection of Earthing station with 50 mm dia. GI pipes 3.65 mm thick, 3M long and 1no. 4 SWG G.I wire 4 M long, 13mm dia, 80 mm long G.I bolt double washers, nuts, S&F 15 mm dia G.I pipe protection , to be field with bitumen, partly under ground and partly above above ground level driven to an avarage depth 3.65 m below the ground level including excavation of soil
Providing & fixing of suitable Avaition obstruction lights of reliable design and reputed manufacturer on the top of each mast.
Supplying and drawing 4 core 16 sq mm pvc insulated and scheathed alluminium conductor armoured cable through under ground ( Polycab/Legrand/Havells or equivalent make) Test certificate to be provided
Providing & Laying of 16 mm Sq 2 Core ,XPLE insulated aluminium armored cable overhead/U gas per iS Specification.Make Havells/KEI/Polycab. Test certificate to be provided
Providing & fixing of 40/50 mm HDPE Pipe
Providing & Laying of 2.5 Sq mm ,1- Core,FRLS multistrand wire,Havells /Polycab/HPL Test certificate to be provided
Providing & Fixing of 25X3 mm GI Strip.
Geo tag pics of before / during and after completion of work
Return back of any red materail to Divisional store
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.57 MB
SBD34.pdf
Tender Documents • 1.67 MB
BOQ_988073.xls
BOQ • 0.33 MB
Extension_2.pdf
PDF • 0.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .