Construction of Dinning hall at Mathur ADC Community hall in Mathur Panchayat Vembakkam Block of Tiruvannamalai District Under (VILLAGE PANCHAYAT GENERAL FUND)

Amount

Work Details

Earthwork excavation and depositing on bank with initial lead and lift in hard stiff clay soil and hard gravel soil as per standard specification SS 20 B for narrow foundation

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of materials to site and all other labour charges, etc. complete.

R.C.C. 1:1 1/2:3 mix using 20mm ISS HBG metal including cost and conveyance etc., complete

Supplying and errecting centering for sides and soffits including supports and strutting up to 3.29m. Height for plain surfaces including strutting.

Below Ground Level

Grade beam

Supplying, fabrication and placing in position mils steel or ribbed for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standared specification.

Brick work in cement mortar 1:5 (one cement five sand) using country Bricks ground moulded of size 23x11x7 cm. for the following including curing etc., complete complying with standard specification.

Plastering with Cement Mortar 1:3 (one cement and three sand) 10 mm. thick in all floors including curing etc., complete complying with standard specification and as directed

Plastering with Cement Mortar 1:5 (one cement and five sand) 12mm. thick in all floors including curing etc., complete complying with standard specification and as directed

Weathering course concrete using best quality broken brick jelly of 20mm uniform gauge in pure slaked lime (Nosand to be used (over the rcc roof slab in the proporation of brick jelly to lime being 32:121/2 by volume laid over in sing well single layer and by volume laid over in the single layer and consilidated to the required slope finishing thickness and beating the concrete with wooden beating the concrete with wooden approved pattern keeping the surface constantly sprinling lime , jaggery water etc, complete complying with standardspecification.

Teerace floor finished with one course of pressed tiles of size 20x20x2cm with cement mortar 1:3 mix and pointed with same oiled mortar including cost and conveyence of all material to site all labour charges etc,

Colour washing the best distember two coats of approved colour over old including cost and conveyance of all material and all labour charges etc,

Colour washing two coats with Exterior emulsion paint in all floors using best quality and approved variety of colour pigments including cost of all materials, brushed and scaffolding charges, etc,., complete complying with standard specification. (Strainer and colour solution should not be used)

Paving the floor with Kotta Green tiles of size 60cm X 60cm X 1.8 to 2 cm thick in Cement mortar 1:3 etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and Fixing the Steel Doors & Window including cost and conveyance of and conveyance of all materials to site and all labour charges etc complete

Electrification

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 65

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84

Supply and fixing of CFL bulb SD 80

Tube light

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing SD 142

Supply and fixing of TNEB Meter board SD 125

Provision for E B Deposit charges etc.,

Water Supply

Conducting Geo Physical survey including conveyance of instrument etc

Drilling of 150mm dia borewell upto recommended depth in hard rock area including inserting casing pipe etc

Drilling of 150mm dia borewell upto recommended depth in hard rock area including inserting casing pipe etc

Supply of 150mm dia PVC casing pipe

Cost of supplying of Motor & PVC pipe and specials

1.50HP submergable borewell motar

32mm Cloumn Pipe

32mm Adopter

Bore end cap

Bore clamp

Copper wire

Nylon rope

2.50 Sqmm cable wire

2000 lit tank

32mm NRV

Flage set

Pannel board

25mm nipple

25mm GI elbow

32mm PVC FTA

25mm x 150mm GI Nipple

25mm PVC Tank Nipple

25mm GI Nipple

25mm GI cupling

25mm pvc Pipe

Labour Charges Erection of Motar & Spls

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

M TAMILARASU (BID ID -1091089)