PERIODICAL SERVICES TO ALL OCCUPIED F1 AND E TYPE QTRS OF MTPF AMBERNATH INCLUDING TERMITE TREATMENT TO EXTERNAL WALL AND ALLIED REPAIRS

M & L for preparation of surfaces including thorough cleaning of surface, removal of all sort of dust / loose paint etc from the surface to be painted including application of putty for filling of cracks, holes and dents wherever applicable, thorough cleaning of all rooms, and applying Two coats of distemper oil emulsion on ceiling (Make: 1st Quality Distemper oil emulsion from Asian Paints (Tractor Emulsion) / Birla Opus (Style Colour Smart) / Nerolac Paints (Beauty Acrylic Distemper) / Berger Paints (Bison Acrylic interior Emulsion)), etc all complete as directed by EIC. Imp Notes: (i) The Firm may visit the site for better understanding the scope of work before quoting for the tender. The Technical Evaluation will be carried out of those Tenderers, who have visited the site before quoting for the tender and have submitted declaration regarding the same. (ii) The prepared surface shall be shown to the SIC & EIC before start of 1st Coat. (iii) Similarly the 1st Coat of paint shall be shown to the SIC & EIC before start of 2nd coat. (iv) The Contractor shall make sure that the surface shall be finished to the entire satisfaction of the EIC. The Contractor shall make good defects / shall apply more coats of paints as required for achieving the desired finished surface at its own risk and cost. (v) The shade of the paint shall be approved from the EIC before start of work. Also the Contractor shall use same make of paint throughout the work

M & L for preparation of surfaces including thorough cleaning of surface, removal of all sort of dust / loose paint etc from the surface to be painted including application of putty for filling of cracks, holes and dents wherever applicable, thorough cleaning of all rooms, priming plaster and other surfaces with alkali resistant priming paint (Make: 1st Quality Primer from Asian Paints/Birla Opus/Nerolac Paints/Berger Paints as suitable to approved make of distemper) and applying Two coats of distemper oil emulsion on Walls (Make: 1st Quality Distemper oil emulsion from Asian Paints (Tractor Emulsion) / Birla Opus (Style Colour Smart) / Nerolac Paints (Beauty Acrylic Distemper) / Berger Paints (Bison Acrylic interior Emulsion)), etc all complete as directed by EIC. Imp Notes: (i) The Firm may visit the site for better understanding the scope of work before quoting for the tender. The Technical Evaluation will be carried out of those Tenderers, who have visited the site before quoting for the tender and have submitted declaration regarding the same. (ii) The prepared surface shall be shown to the SIC & EIC before start of Primer coat and similarly Primer coat shall be shown to SIC & EIC before 1st Coat. (iii) Similarly the 1st Coat of paint shall be shown to the SIC & EIC before start of 2nd coat. (iv) The Contractor shall make sure that the surface shall be finished to the entire satisfaction of the EIC. The Contractor shall make good defects / shall apply more coats of paints as required for achieving the desired finished surface at its own risk and cost. (v) The shade of the paint shall be approved from the EIC before start of work. Also the Contractor shall use same make of Primer & Paint throughout the work.

M & L for preparation of surfaces including thorough cleaning of surface, removal of all sort of dust / loose paint etc from the surface to be painted including application of suitable putty for filling of cracks, holes and dents wherever applicable, thorough cleaning of all rooms, and applying One Coat of Synthetic enamel (Make: 1st Quality from Asian Paints / Birla Opus / Berger) on wood and wood based surfaces, etc all complete as directed by EIC. Imp Notes: (i) The Firm may visit the site for better understanding the scope of work before quoting for the tender. The Technical Evaluation will be carried out of those Tenderers, who have visited the site before quoting for the tender and have submitted declaration regarding the same. (ii) The prepared surface shall be shown to the SIC & EIC before start of 1st Coat. (iii) Similarly the One Coat of paint shall be shown to the SIC & EIC. (iv) The same make of Paint shall be used throughout the work. Further the shade of the paint shall be the same as existing shade to achieve desired finish in one coat.

M & L for preparation of surfaces including thorough cleaning of surface, removal of all sort of dust / loose paint etc from the surface to be painted including application of suitable putty for filling of cracks, holes and dents wherever applicable, thorough cleaning of all rooms, and applying One Coat of Synthetic enamel (Make: 1st Quality from Asian Paints / Birla Opus / Berger) on Steel and Iron surfaces, etc all complete as directed by EIC. Imp Notes: (i) The Firm may visit the site for better understanding the scope of work before quoting for the tender. The Technical Evaluation will be carried out of those Tenderers, who have visited the site before quoting for the tender and have submitted declaration regarding the same. (ii) The prepared surface shall be shown to the SIC & EIC before start of 1st Coat. (iii) Similarly the One Coat of paint shall be shown to the SIC & EIC. (iv) The same make of Paint shall be used throughout the work. Further the shade of the paint shall be the same as existing shade to achieve desired finish in one coat.

M&L for taking down old loose plaster, and rendering Avg. 20 mm thick cement plaster in CM 1:4 with Neeru finish to match the level of existing plaster, including thorough cleaning of site and removal of all rubbish outside of the premises and shifting to low lying area with proper leveling etc all complete as directed by the EIC. Imp. Note: (i) The Contractor may visit the site for assessment of required thickness of plaster repair work before quoting for the tender. (ii) The Contractor shall use aggregate of proper gradation for mortar preparation and shall not use Stone Dust. (iii) The cement used shall not be more than one month old.

M & L for Providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear metre including drilling and plugging holes etc. in apron at suitable intervals (Up to 1 m c/c) etc all complete as directed by the EIC. Imp Notes: i) Sample of chemical emulsion shall be got approved from EIC before use in work. ii) The Contractor shall carry out the work only in presence of Authorized Factory Representative. iii) The Contractor shall take photos & make videos of the work for each qtr and shall make a record of the same. iv) The Contractor shall take the signature of Occupant of Quarter / Bldg after anti termite treatment work and shall submit the same to SIC / EIC for record.

M & L for preparation of New or previously untreated surfaces of stone masonry including complete removal of all sort of loose dust with washing down, and application of Two Coats (or extra coats of paint at Contractor's own risk & cost so as to bring the surface to the desired finish to the entire satisfaction of the EIC) of Synthetic Enamel / Clear Stone Polish / Clear Stone Varnish (Make: 1st Quality form Asian Pains / Birla Opus / Nerolac Paints / Any other reputed make as approved by the Competent Authority) suitable for dressed stone surface including necessary safety precautions, thorough cleaning of site etc all complete as directed by the EIC. Imp Note: (i) The Sample of Paint / clear stone polish / Clear Stone Varnish shall be got approved from the EIC before start of work. If desired by the EIC, Contractor shall apply sample of paint / varnish on stone wall surface before execution of work. The same make of paint shall be used throughout the work. (ii) The Contractor shall thoroughly clean the surface with water jet prior to start of painting work.

M & L for External painting in Two Coats including following procedure: (i) Preparation of old painted surfaces plastered or unplastered, it shall be ensured that the surface to be painted must be free from any loose paint, dust or grease. Any previous growth of fungus, algae or moss should be removed thoroughly by vigorous wire brushing and cleaning with water. Surface imperfection such as holes, dents fine cracks should be filled with exterior wall putty, (Make: 1st Quality exterior wall putty form JK / Birla / Asian Paints / Birla Opus Paints / Berger Paints / Nerolac Paints) a mixture of white cement and fine sand in proportion 1:3 may be used for large imperfections / cracks as directed by EIC. [The surface such prepared shall be shown to SIC & EIC for inspection before application of Primer] (ii) Applying one coat of Exterior Wall Primer (Make: 1st quality exterior wall primer as approved by Competent Factory Authority from Asian Paints / Birla Opus Paints / Nerolac Paints / Berger Paints ) as per Manufacturer's Specifications. The exterior primer shall be applied @ minimum 0.90 Litre / 10 Sq.m. The primer coat shall be allowed to dry for 4 hours. [The surface after application of Primer shall be shown to SIC & EIC before application of 1st coat of Exterior Emulsion] (iii) Finishing walls with ready mixed Premium Acrylic Emulsion paint (Company Depot Tinted) having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, Dirt Resistance exterior paint of required shade with silicone additives, Two or more coats applied @ 1.43 litre per 10 Sq.m (Make: 1st quality Weatherproof Exterior Emulsion as approved by Competent Factory Authority from Asian Paints / Birla Opus Paints / Nerolac Paints / Berger Paints ) over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sq.m as mentioned above. A gap of 4-6 hours should be given between each coat. All the above works shall be carried out at any height including necessary scaffolding, staging and all safety precautions with necessary safety equipments, including complete cleaning of site and removal of all rubbish outside Factory Premises etc.all complete as directed by Engg-in-Charge. [The surface after application of 1st Coat shall be shown to SIC & EIC for inspection before application of 2nd Coat of Exterior Emulsion. Subsequently the surface after application of 2nd Coat shall be shown to SIC & EIC for final inspection. Necessary rectification works / re coating work for achieving desired finish shall be made by the Contractor at own risk & cost until the surface is finished to the entire satisfaction of the EIC / Competent Factory Authority] (Important Note1: The Bidder shall specify the make and trade name of the Exterior Primer and Premium Acrylic Emulsion Alkali & Fungal resistance, Dirt Resistance exterior paint among the specified makes mentioned in the specification in the Technical Bid as per prescribed format which shall be used during the work by the Bidder. The Bidder will not be considered as Technically qualified if he / she fails to submit the make and trade name in the Technical Bid.)