SPECIAL REPAIR TO BLDG NO P 12 1 TO 6 OF KHETARPAL ENCLAVE AND OTHER SANCTIONED WORKS AT NAMS

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil all as specified and directed.

Earth work in excaviation by Machanical means(Hydraulic exavator)in foundation teenches or drains (not Exc 1.5M)in width or 10sqm on plai) including dressing of side and ramming of bottoms ,lift up to 1.5 m including getting out of the exaviated soil and disposible of surplus exaviated soil as directed within lead of 50mm complete all as specied and direct..

Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm .

Taking down shutter of any description size exc 1 sqm and n.exc 2 sqm complete all as specified and directed.

Taking down and refixing in same opening after making necessary cutting shutter of any description size but exc 1 sqm and n.exc 2 sqm complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from frame) each complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n.exc 4 sqm with shutters (without taking off shutters from frame) each complete all as specified and directed.

Demolition of cement concrete (un-reinforced)in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 50 mtrs where directed complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in cm (1:6) straight or curved on plan exc 6 mtrs mean radius, including demolition complete all as specified and directed.

ditto as above item no 10 but except bricks

M&L, Rendering 15mm thick in CM 1:6 on brick work or concrete surface finish ever and smooth (w/o using extra cement) complete all as specified.

M&L, Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finish even and smooth (w/o using extra cement) complete all as specified.

M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement all as specified.

M&L, Rendering 15mm thick in CM 1:6 on of brick work or concrete surface finish even and smooth (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and smooth (w/o using extra cement) incl taking down old plaster on brick or stone walls ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed. Note : (WPC shall be measuared seperatly and @ 3% by weight of cement/ 200ML for 50kg cement bags or as per manufacturer's instructions).

Supply only liquid WPC complete all as specified and directed.

M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement incl taking down old plaster on ceiling ,scrubing down with water etc & dispose off debris where directed by EIC, complete all as specified and directed.

M&L two coat of OBD including preparation as new surfaces and priming coat chalk whiting walls complete all as spcified.

Ditto as above item no 19 but Two coat of OBD on old surfaces of walls

M & L three coat of white wash incl preparation of new plaster surface of ceiling all as spd directed.

All as per item No. 21 above but one coat on old surface as on ceiling.

Material and labour for applying two coats of cement base paint over one coat of primer on plastered surfaces of walls including preparation of new or previously untreated surfaces all as specified and directed

M&L for two coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc surfaces by spray machine over one coat of primer incl preparation of new plasterd surface complete all as spd and directed. Note Colour and make as approved by Engr-in-Charge

M&L for two coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc surfaces by spray machine over two coat of primer incl preparation of old plasterd surface complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 10 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) Two coat of red oxide primer to MS window and guard bar. Note : Including taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 10 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) Two coat of red oxide primer to MS window and guard bar. complete all as specified and directed by Engineer-in-charge.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass,fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 including taking down old ventilators complete all as specified. NOTE : Sheet glass and painting shall be measured and paid Separately.

M&L framed work as in doors etc of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

Material and Labour glazed and skeleton shutter for door 35mm thick 2nd class hard wood(Hollock) open rebated prepapred to receive glass, guage etc ( without sash bars) edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section 8 Clause 8.24(a) complete all as specified and directed.

S & F in repair 18/19 mm prelaminated particle board, exterior grade, prelaminated Both side with decorative choice lamination & othe side balancing white lamination, fixed with 50mm screws/welding the any type of frame work complete all as specified and directed.

Hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and glazed with oil putty

S & F 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F butt hinges 100mm long medium weight cold rolled mild steel fixed with steel screws complete all as specified.

S & F 150 mm aluminium anodised barrel tower bolt of extruded sectionwith bright bolt complete.

S&F Hasp & staple 125mm aluminium anodised complete all as spd and directed.

S&F in repair, 300 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd.

S&F 150mm aluminium handle cast type anodised complete.

S&F floor door stopper 140mm of aluminium alloy body and touge anodised, with hard drawn steel spring fixed and complete all as specified and directed.

M&L for preparation of new wooden Surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified as directed.

M&L preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetics enameled paint complete all as specified and directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair mild steel powder coated curtain rods 20mm dia of approved quality incl bracket, knobs etc complete all as directed, by Engr-in-Charge.

S & F 15mm bore medium grade galvanized steel tubing with all fitting and fixed to walls, celling or in floors incl cutting chases for concealed water tubing not exc 10cm incl taking down old Gi tube and making good in CM1:3complete all as specified.

S & F 20mm bore medium grade galvanized steel tubing with all fitting and fixed to walls, celling or in floors incl cuuting chases for concealed water tubing not exc 10cm incl taking down old Gi tube and making good in CM 1:3 complete all as specified.

S&F 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush down pipe etc complete all as specified and directe

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as spd(minium weight of190gms) complete all as specified and directed

S&F 32mm dia PVC waste pipe (corrugated) for wash hand basin complete all as specified and directed

S & F Grating doom 100 mm dia of PTMT (Minimum weight 25gms)

S&F, PVC shelf 12cm wide and approx 42 cm long fixed with screws complete all as specified and directed by Engr-in-Charge.

S & F in Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S/F in repair15mm bore stop cock cast copper alloy CP fancy type of long body screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete.

S & F Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S & F in Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S& F for repair 15mm swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed . Make: Parryware & Equivalent,

S& F 15mm swan neck pillar cock chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed .

S&F in repair brass chromium plated pressure adjustable shower rose 125mm size fancy type with revolving joints incl shower arm 190mm and fixing to steel pipe or union complete all as specified.

S & F in repair viterous china squating pan of (Orrissa Pattern) size 580 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S&F in repair stainless steel plate Rack 1mm thick size 750x750x250mm weight not less than 7.5 kg with folded edge gloss finish complete all as specidied and directed.

S&F in repair sinks made of stinless steel 1 mm thick kitchen or laboratory with drainage board of size 915 x 460 mm with plugs, washers and wastes; incl bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm and connecting union to pipe, overall size 495x420 mm bowl size 410 x 330 x 160 mm

S&F 500 ltr capacity triple layer rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) hoisted and fixed in position incl 20mm bore ball valve PVC high pressure with palythene float and flynut and 20 dia bore gun metal globe or gate valve including taking down old watertank complete all as specified and directed.

S&F Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6.including dismantiling old tiles complete all as specified and directed.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6.including dismantiling old tiles complete all as specified and directed

S&F Coloured/printed glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tiles 0.06 to 0.16 sqm, in invertical surfaces(skirting/dado) including 10mm thick cement plaster in CM 1:4 .including dismantiling old tiles complete all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed.

M&L MS framed work such as grills, gratings,guardbar with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 in repairs.

S&F in repair 100mm cast iron soil, sand cast pipes, waste and vent pipes, in any length with or without ears, with cement joints,includig dismantling laid in trenches or in floors in repairs.

S&F, 100mm cast iron bends diminishing pieces or tapers in repairs.

S&F in repair 75 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls with clamp complete all as specified.

S&F 75mm dia PVC (SWR) bends,junction complete all as specified.

S&F in repair 100mm cast iron bends diminishing pieces or tapers with oval access oval in repairs.

M & L in repair for 50 mm thick PCC 1:3:6 type C-1 (using 20mm grade stone agg) as in plinth protection even and smooth without using extra cement complete all as specified.

M&L reparing of RCC projection, chajja, roof facia, celling by scrapping, cutting, derusting and cleaning exposed reinforcement surfaces of damaged loose RCC surface and applying neat cement slurry @ 3 kg/Sqm and filling the surface with cement plaster 1:3 one or two layer as reqd or PCC 1:2:4 as directed by Engr-in-Charge with or without facia and smooth finished and smotth edges in any height and any situation including necessary form work and demolition of old RCC projection complete all as specified and directed.

M&L for pointing to brick tiles in CM 1:3 laid flat in roofing incl racking out joints complete all as specified .

M&L Providing, cement concrete type B-1, 1:2:4 (20mm graded aggregate)as in hunching, coping , benching etc complete all as specified as directed.

S&F in repair 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls with clamp complete all as specified.

S&F 110mm dia PVC (SWR) bends complete all as specified.

S & F in repair for viterous china wash hand basin white flat back size 550 x 400 mm with leg incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.

S & F viterous china wash hand basin white flat back size 550 x 400 mm incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.

M&L for PCC (1:4:8), C2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete.

M&L for pre cast RCC normal mix (1:2:4) type B1(using 20 mm graded stone aggregate). as in slabs supported on walls,beams and coloums in floors and roofs, landing balconies chaza,etc all as specified and directed .

S&F mild steel TMT bars 10 mm dia and over cut to length bend to shape rtequired including cranking binding spirally for hooping for columns hooking and binding with and including mild steel wire(anneled not less than 0.9 mm dia or securing with clips quility conforming to Fe -410 S or Fe 410-0.

M&L Hardcore of gauge not exc 63mm broken stone or boulders but not exc 100mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rolled/rammed to a true surface for levelling the surfaces

Ditto as per item no 86 above here in before but 6 to 8 mm dia as in stirrups,spacers,binders,etc complete all as specified and directed

M&L for use and waste of form work packing and shuttering of rcc piller not exc 1.5 mm wide all as specified and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick rendering as screed bed in cement mortar (1:4) in floors,complete all as specified and directed.

M&L for glazed ceramic coloured/printed/dark tiles size exc .09 and not exc 0.18 and 7mm thick on vertical surface in skirting /dado ,set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GEall as specified and directed.

S & F in repair for viterous china wash hand basin Counter type size 550 x 400 mm with leg incl CP waste coupling, waste pipe & plug and porclain stopper brackets and cutting for and pinning in ends of brackets or erceting stand fixed complete all as specified and directed.

S&F for 15 mm bor GI tube medium grade freed to wall or under floor cutting closes and make good in CM 1:3 complete all as specified and directed.

S& F for 20 mm bore G.I tubing in wall/Roof with all fittings complete all as specified and directed.

S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .

M&L for Reinforced concrete pipes 150 mm dia class NP3 laid and jointed compleate with collers all as per specified and directed

Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 150/160mm bore including packing under and hunching against side of pipe after they are laid and tested.

S&F Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed

S&F for rotational moulded polythene 1000 litres water storage tanks cylindrical vertical with closed top hoisted and fixed in position inclusive 20 mm dia float valve with aluminium fitting. complete all as specified and directed.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L for PCC 1:3:6 type C0 as in roof Pading (using 12.5 mm graded aggregate ) complete all as specified and directed.

M & L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed

M&L for anodised aluminium powder coated door, window and ventilator shutters, aluminium section weighting 0.55kg/RM fixed type without sash bar, incl necessary 4.8mm th sheet glass ordinary quality & glazing / black or PVC sheet joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 Nos aluminium handles 150mm, 2 x Aluminium tower bolts 150mm with each shutter any type complete all as specified all as specified.

M & L for 18-20 mm thick machine cut kota stone slab laid over 20 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing complete all as specified and directed.

Material and labour for providing Reinforced Cement Concrete (1:1.5:3) type A1 using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases of columns etc all as specified and directed.

Material and labour for providing Reinforced Cement Concrete (1:1.5:3) type A1 using 20 mm graded aggregate as incolumns, pillars, piers, posts and struts all as specified and directed.

Material and labour for providing Reinforced Cement Concrete (1:1.5:3) type A1 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m all as specified and directed.

Material and labour for providing Reinforced Cement Concrete (1:1.5:3) type A1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floor, roof, landing, balcknies, conopies, decks, slab and in shelves and like all as specified and directed.

M&L brickwork in CM 1:6 with sub class 'B' bricks, straight or curved on plan exc 6m mean radius complete all as specified and directed.

Material and labour for half brick work in cement mortar (1:4) straight or curved on plan in any radius with locally available Sub Class 'B' old size best quality brficks all specified and directed.

Use and waste formwork to sides of concrete foundation footings base of coloumns sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for rough finished flat surface of concrete all as specified and directed.

Use and waste formwork to sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam hunching, girders, lintels, cantlievers, shelves including supports, etc for rough finished flat surfaces of concrete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, la ndings and similar work; not exceeding 200 mm thick (Horizontal or slopping) for rough finished flat surfaces of concrete all as specified and directed

Use and waste of form work to edges of concrfete flats, slabs etc incl fair finished surface all as specifed and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius diminishing pieces or trapers (larger bore measured) complete all as specified and directed.

S&F for PVC(SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75/110mm complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm dia complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 75/100mm dia with access door

M &L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 110mm bore of pipe PCC 1:4:8 type D-2 concrete bed to drain pipes including packing under and hauching against the sides of pipes after they are laid complete all as specified.

Excavation over areas not exceeding 1.5 M deep and getting out in Soft/ Loose Soil

Excavation over areas exceeding 1.5 M and not exceeding 3 M deep and getting out in Soft/ Loose Soil

S & F Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells etc complete all as specified and directed.

M&L of 75mm plain Cement concrete type C-2, 1:3:6 (40mm graded aggregate) including the top surface finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for 15 to 17mm thick pe-polished Green marble slab as in partition of urinals, steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in set in 10 mm thick cement mortar (1:4) including rounding of edges complete all as specified and directed.

S & F steel work in tubular trusses and tubular posts including special shaped washers, chequered plate, angles etc., complete using but welded tubes confiRming to IS 1161- 1979 graded St 240 complete all as specified and directed.

S&F mild steel rolled section of Fe-410-W (Gde E-250) quality-A, Joist, channel, angle, beam, or tee sections as vertical, horizontal obstacle etc fixed independently, connection plate, including necessary welding bolting etc. (cut to ordinary lengths i.e. within 20mm of the length indicated complete all as specified.

S&F for Pre- painted galvaume aluminum zinc coating GI based manglore/trapezoidal/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding/ridge, fixed with self tapping screws as specifiedcomplete all as specified and directed. Note- Design/Pattern/colour of roofing sheet sheet to decided and approved by EIC/GE.

M & L for 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 complete all as specified and direcyed.

S&F 15mm bore dia chromium plated Urinal spreader fixed to pipe complete all as specified and directed

S&F 500 ltr capacity tripple layer rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball valve PVC high pressure with palythene float and flynut and 20 dia bore gun metal globe or gate valve complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F Grating doom 125 mm dia with waste hole of PTMT.(Minimum weight 40gms)

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

M&L for cement concrete ,Type C1 1:3:6 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L reinforced precast cement concrete Type B1,1:2:4 using 20mm graded aggregate as in lintel bean/shelves/cover slabs (and similar articles with plain faces set in cement mortar 1:4 complete all as spd

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as spd

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface

Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring in replaement with 1.5 sqmm (Nominal area ) 1100 Volt PVC Insulated , FRLS unsheathed and multi stranded copper conductor cable in exsting PVC Concealed conduit not less than 20mm dia 1.5mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surfaces) and fixing new 3mm thick plastic laminated sheet top cover, sheet screws and 1.6mm thick GI sunken boxes after removing old unserviceable plastic laminated sheeet and sunken boxes included 1.5 Sqmm stranded copper conductor with green PVC Insulation earth contunity conductor connected to common earth dolly etc . complete all as specified and directed for the following :- Note : The cost of sunken boxes and bakellite sheet is included in the quoted rate) For one light /fan/ exhaust fan/buzzer point controlled by one 5 Amp switch one way

All as per Srl item No 146 above but for one 5 amps socket out let independent complete all as specified.

All as per Srl item No 146 above but on the same board completeall as specified

All a per item No 146 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement switch type regulator 5 step Soket type 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing I replcement of switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing in replacement socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing in replacement ceiling rose 65X50 mm two to three terminals complete all as specified.

Material and labour for replacement of lamp holder insulated body with back plate batten/angle type for batten fitting with LED Bulb 230V AC 10 watt cool day light 6500K having maximum height 1020mm heavy duty complete all as specified.

Supply and fixing in replacement of Amp rating 240V, 10 KA, 'C' curve miniature circuit breaker (MCB) of Single pole 5 to 32 Amps current carrying capacity in the MCB DB complete with connection, testing and commissioning.

Supply and fixing in replacement of Amp rating 240V, 10 KA, 'C' curve miniature circuit breaker (MCB) of SPN 40 Amps current carrying capacity in the MCB DB complete with connection, testing and commissioning.

Supply and fixing in replacement of Amp rating 240V, 10 KA, 'C' curve miniature circuit breaker (MCB) of SP 40 Amps current carrying capacity in the MCB DB complete with connection, testing and commissioning.

Supply & fixing in replacement of single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with one single pole MCB of 20 Amps complete all as specified and as directed.

Supply and Fixing in replacement of bell push 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Supply and fix exhaust fan , steel body AC single phase, 230 V of size 300 mm sweep with, blades and frame and louvers . Note : The quotaed rate is include with making suitable hole in exsiting wall for fixing of exhaust fan and making good in distrubed / ruffed surace match with exsiting surface.

Supply and fixing in replacement of sheet steel enclouser distribution boards, double door factory made TPN Vertical 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)

Supply and fix in replacement for sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.0 Sqmm drawing into and including PVC non metallic rigid conduit medium grade of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) and including non metallic medium grade rigid PVC conduit, including cutting chases in brick wall, and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable, one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

All as per Srl item No 165 above but for 4 sqmm

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make

M & L for earthing in replacement complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (Heavy duty_) LT 1100 volt grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

Supply and fixing in replacement of LED T-8 tube light box type fitting with single side connection LED tube rod 18/20W 4 feet 1 x 18/20 watt MS CRCA box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

Supply & fix in replacement of LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.

Supply and fixing in replacement of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge

Supply and fixing in replacement of bell Ding Dong AC 230 volts complete all as specified and as directed

Taking down the ceiling fan/Exhaust fan in situ and refixing after servicing, repairing and painting to ceiling fan/Exhaust fan including exhust fan louvers , scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint all as specified and directed.

Taking down Geyser any type in situ and refixing after servicing, repairing and painting including scratching old paint and preparation of surface for painting with one coat of white enameled paint all as specified and directed.

Excavation trenches not exceeding 1.5m wide & not exceeding 1.5m in depth for and getting out in any of soil.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25 cm thick all as specified and directed.

Removal of surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified

M/L Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified

S &F in replacement of LED bulk head light fittings 10 watt white including LEDstrip as per IP65 in enginnering plastic housing withclear prismatic diffuser and making necessary connections complete all as specified

M & L for Point wiring with 1.5 Sqmm (Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in and incl new PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point or bell point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate) One light / fan / Exhaust fan point controlled by one 5 Amp switch one way.

All as per Srl item S No-181 above but for one 5 Amps socket out let independent complete all as specified.

All as per Srl item S No-181 above but on the same board complete all as specified.5

All as per item No-181 above but with 2.5 sqmm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 1.5 sqmm copper solid conductor connecing to common earth dolly complete.

Supply and fixing switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed.

Supply and fixing switch type regulator 5 Step 230 Volts AC complete all as specified and as directed.

Supply and fixing socket outlet 5 Pin, 6 Amp flush type 230 Volts AC complete all as specified and as directed.

Supply and fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed.

Supply and fixing socket outlet 6 Pin 6/16 Amp multi purpose flush type 230 volts AC complete all as specified and as directed.

Supply and fixing ceiling rose 65/50 mm two to three terminals complete all as specified.

Material and labour of lamp holder insulated body with back plate batten /angle type for batten fittings with LED bulb 230 V AC 10 Watt cool day light 6500 k having maximum height 1020 mm heavy duty complete all as specified.

Supply and MCB 40 Amps single pole with neutral, AC 230 Volts complete all As specified and directed.

Supplying and fixing of MCB DP 40 - 63 Amps 240V, 10 KA, complete all as specified and as directed

Supply and fix MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as specified and directed.

S &F in replacement of LED bulk head light fittings 10 watt white including LEDstrip as per IP65 in enginnering plastic housing withclear prismatic diffuser and making necessary connections complete all as specified

Supply and fixing Sheet metal enclosure for DB's when MCB's to be used double door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 4 ways complete all as specified and directed.

Supply and fixing of DBs , MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

M& labour for service wire 6 sqmm 2core pvc insulated and pvc sheathested1100 volts grade all as specified and directed

Supply and fixing of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed. Make :- HAvells cat part No REGALBATTENT8UPTO1X22WSSBSWH or its equivalent in Philips/Bajaj/CG

Supply and fixng ceiling fan 1200 mm sweep copper winding high speed, aluminium body with blade, double ball bearing of BEE star rated including all accessories connector, canopy, hanging Rod and clamps, including electric connection with PVC flexible twin core copper wire from ceiling rose to ceiling fan complete all as specified and directed.

Supply & fix LED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens.

Supply and fixing of security light mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat of size 40 x 6 mm and nuts and bolts and painting with aluminium paint,all as direced by Engr in Charge

Supply & Fix Exhaust Fan, PVC body AC single phase 230 V, of size 300 mm sweep with, blades, frame and louvers complete . Make : Havells/Philips/Bajaj

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated, armoured heavy duty electric cable with aluminum conductor, 1100 volts grade, cross section area 10 sqmm 2 core complete all as specified and diercted.

S&F DWC high density polyethelene pipes having dia 63 mm / 50mm, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930 (Part-I & II) for protection of underground cable laid along pole/ along wall / in PCC on GL/ Roof and including all fittings as required at site complete all as specified and as directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed.

M & L cutting of exsiting Steel tube any size for alternation / addition of pipes complete all as specified and as directed.

Supply and fixing 25 mm bore pipe mild steel tube medium grade galvanised with all fittings laid in trenches complete all as specified and as directed.

Supply and 25 MM bore gun metal alloy screwed down high pressure with crutch with or butter fly handle screwed both ends for pipe complete all as specified and as directed.

M/s Vijay Construction Co.

B.J.CONSTRUCTION CO