SPECIAL REPAIRS TO BUILDING NO P - 107 OF AIRMEN POLICE BILLET AT HQTC (U) BANGALORE

Amount

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 etc. complete all as specified

M&L for Providing Pre-cast cement concrete louvers and jallies, 25mm thick (measured solid) type C0 1:3:6 (12.5 mm graded aggregate) set in cement mortar 1:6 including all mouldings etc. complete all as specified

M&L for hardcore of Broken stone or boulders of guage n exc 63mm., deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, etc. complete all as specified

M&L for 50mm Sand filling under floors or in foundations including watering and consolidation, Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required etc. complete all as specified

Material and labour reinforced cement concrete (nominal mix) Type A1 1:1½ :3 using 20 mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts etc. complete all as specified and as directed.

M&L reinforced Cement Concrete Type A1 1:1½:3 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified and as directed.

M&L Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 m span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified and as directed.

M&L Providing precast cement concrete solid building blocks or slabs 10cm thick of Type C1 1:3:6 (20mm graded aggregate) (with plain or interlocking joints as directed) setting in mortar 1:6, complete, in walls etc. complete all as specified and as directed.

Material and labour reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20 mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc. complete all as specified and as directed.

Supply only liquid water proofing compound

Cutting chasis, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring into the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.

M&L for 20mm thick Granite (Jet black) of any type work (table rubbed and polished) in cooking platform, window sill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade granite incl 20 mm thick screed bed in CM 1:4.etc. complete all as specified and as directed.

M&L for Sadarahalli Granite flooring 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15mm thick screed bed of CM 1:6 etc. complete all as specified and as directed.

M&L for Sadarahalli Granite 20mm thick machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc. complete all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished complete all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surfaces complete all as specified and as directed.

M&L 2nd class hard wood Plain fillets. square, rectangular or triangular, exc 6Sqcm & n. exc 13sqcm in section, clean sawn, secured with screws etc. complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each etc. complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc. 4 sq. m each etc. complete all as specified and as directed.

Taking down door/ window shutters of any description exc 1 sq. m and n exc 2 sqm resecuring or easing & adjusting and refixing in same opening all as specified.

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site etc. complete all as specified and as directed.

S&F factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 108 x 45 mm ( + 2mm) & sash 38 x 60 mm ( + 2mm) both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's, 4mm thick sheet glass ordinary quality, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass and wiremesh shall be measured and paid separately) etc. complete all as specified and as directed.

S&F for 125mm aluminium anodised barrel tower bolts of extruded section etc. complete all as specified and as directed.

S&F for 200mm aluminium anodised barrel tower bolts of extruded section etc. complete all as specified and as directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel etc. complete all as specified and as directed.

S&F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat etc. complete all as specified and as directed.

S&F 125mm Aluminium handles, cast type anodised etc. complete all as specified and as directed.

S&F 150mm Aluminium handles, cast type anodised etc. complete all as specified and as directed. .

S & F mortice latch with two levers (vertical type), brass body and length of the latch is 65 mm etc. complete all as specified and as directed.

S&F in repairs Brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges etc. complete all as specified and as directed.

S&F in repairs 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,etc. complete all as specified and as directed.

S&F ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed etc. complete all as specified and as directed.

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc. complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc. complete all as specified and as directed.

S&F in repairs curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section etc. complete all as specified and as directed.

S&F in repairs 25mm dia mild steel powder coated, fancy type curtain rod complete all as specified.

S & F in repairs stainless steel self closing auto hinges for wooden cabinet shutter complete all as directed

S&F Cast iron work grade FG 150, Articles n exc 5 kg each, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles etc complete etc. complete all as specified and as directed.

S&F Cast iron work grade FG 150, Articles exc 5 kg each, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles etc. complete all as specified and as directed.

M&L Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; and similar work conforming to Fe.290.Gde-E-165 etc. complete all as specified and as directed.

Material and labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 43 here in above but TMT bars 8 mm dia in stirrups, spacers and binders etc. complete all as specified and as directed.

S&F Fe 410 - W (Gde-E- 250) quality-A Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening etc. complete all as specified and as directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc. complete all as specified and as directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick bent to arch /parabolic/ or any other shape as per site requirement) of an colour having tensile strength of 550 Mpa as in roof covering cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in-charge.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws as specified and directed by Engineer-in-charge.

M&L for water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer & 0.20 Kg/Sqm and providing 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10 cm side lap and 15 cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/Sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/primer @ 0.1 Kg/Sqm over RCC roof slab/ projection/ parapet after cleaning the surfaces by removing dust dirt etc as manufactures instructions complete all as specified and directed.

S&F in repairs for Prelaminated particle board, 18/19mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc. complete all as specified and as directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc. complete all as specified and as directed.

M&L for 40mm thick Cement concrete type B-1, 1:2:4 over roof (20mm graded stone aggregate) etc. complete all as specified and as directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring etc. complete all as specified and as directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 etc. complete all as specified and as directed.

All as per item No 55 but as in skirting over and including 10mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc. complete all as specified and as directed.

M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:6 etc. complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 350x250x7mm/ 450x300x7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat of cement mortar 1:4 etc. complete all as specified and as directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment etc. complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc. complete all as specified and as directed.

M&L for rendering 10mm thick cement plaster in cement morter 1:3, mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces or roof surfaces, finished even and smooth without using extra cement etc. complete all as specified and as directed. Note: Liquid WPC will be measured and paid separately

M&L for Rendering 10mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement etc. complete all as specified and as directed.

Rendering 5mm thick cement plaster in cement mortar 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement etc. complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in cement morter 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement.

Material and labour rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound as per manufacturers instructions , finished even and smooth with out using extra cement etc. complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 with water proofing compound, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surface of walls including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white washing etc. complete all as specified and as directed.

All as per item No 68 here-in -before but one coat of white washing on ceiling etc. complete all as specified and as directed.

M&L for preparing newly plastered on walls and applying three coats of white wash etc. complete all as specified and as directed.

M&L for preparing new plastered on ceiling and applying three coats of white wash etc. complete all as specified and as directed.

M&L for 2 coats of cement based paint over a coat of priming plastered and other surfaces with one coat of alkali resistant priming paint including preparation of new surfaces etc. complete all as specified and as directed.

M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface etc. complete all as specified and as directed.

M&L for 2 coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment etc. complete all as specified and as directed.

Two coats of weather proof exterior emulsion on old decorated surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.

Two coats of weather proof exterior emulsion on new plastered surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.

Supply only 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sq.m in each pane etc. as required all as specified and as directed.

Preparation of old painted surface of any description not otherwise described wood and wood based surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint etc. complete all as specified and as directed.

M&L for preparation of untreated new wooden surface of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats etc. complete all as specified and as directed.

Preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic enamel paint etc. complete all as specified and as directed.

M&L for preparing new steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer etc. complete all as specified and as directed.

S&F in repairs 15mm two in one Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified. (Weight not less than 700 gms) etc. complete all as specified and as directed.

S&F in repairs angular stop cock 15 mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions etc. complete all as specified and as directed.

S&F in repairs square grating doom 150 mm side with or without waste hole of stainless steel consisting of 0.45 mm thick inner and outer cup and 1.0mm thick top grating with ring to be fixed inside 'P' traps with cement concrete etc. complete all as specified and as directed.

S&F in repairs 6mm thick mirror of any size including rounding and polishing of edges with necessay fittings etc. complete all as specified and as directed.

S&F in repairs CP Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook etc. complete all as specified and as directed. Make:-Cera, Parryware, Somany, Jaguar or equivalent.

S&F in repairs glass corner shelf assembly fancy type made of 5 to 6mm thick glass of size 250 x 250mm fixed with brass CP brackets complete all as specified and directed.

S&F in repairs premium quality wall mixer system with provision for overhead shower complete with 115mm long bend pipe, connecting Legs & wall Flange etc. complete all as specified and as directed. Make:- Jaguar, Cera, Somany or equivalent.

S&F ceramic wash basin of size (WxPxH) 490x430x127mm, white or tinted, counter top, including waste coupling chromium plated etc. and fixed in repairs over granite or wooden cabinet including necessary adhesive or fittings complete all as specified.

Taking up or down 15 mm bore steel tubing medium grade and re-fixing the same steel tubing and connections in new or old position, including cleaning for refixing complete to walls or ceilings or laid in floors complete,all as specified and directed.

All as item No 91 above but 20mm bore etc. complete all as specified and as directed.

S&F Low density polyethylene (LDPE) pipes 32mm dia, of pressure rating 6 kgf/sq. cm fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking up or down old pipe etc. complete all as specified and as directed.

S&F brass elbow (3/4 X ½) for 20mm dia CPVC pipes etc. complete all as specified and as directed.

S&F brass tee for 20mm dia CPVC pipes etc. complete all as specified and as directed.

Dismantling water tanks, capacity in litres exc 500 & n exc 1000 and removing to store etc. complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, capacity in litres 500 (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc. complete all as specified and as directed.

S&F in repairs 15mm Bib taps, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and as directed. (Weight not less than 575 gms)

S&F in repairs 15mm dia swan neck pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "Hot" or "Cold" with long screwed shank and fly-nuts, screwed for iron pipe and fixed etc. complete all as specified and as directed. Make Cera, Parryware, Somany, Jaguar or equivalent.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm etc. complete all as specified and as directed.

S&F PVC (SWR) pipes 150mm bore, single socketed, in any length with rubber ring joints, fixed to wall etc. complete all as specified and as directed.

S&F 150mm bore PVC (SWR) bends of any radius etc. complete all as specified and as directed.

S&F in repairs Soap dish, any type of size approximate size 160x 60x90mm, fixed to plugs with chromium plated brass screws etc. complete all as specified and as directed.

S&F in repairs Brass chromium plated shower rose 125mm size etc. complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc. complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), (excluding flushing cistern and flush pipe), including plastic water closet seat, white or tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc. complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white or tinted, with integral foot rests (excluding flushing cistern and flush pipe) etc. complete all as specified and as directed.

Supply only PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern (Fixing charges are included in the respective item Nos 56 and 57) etc. complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc. complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends of any radius all as specified.

S&F PVC (SWR) 'P' or 'S' trap 110mm bore etc. complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc. complete all as specified and as directed.

S&F 75mm bore PVC (SWR) bends of any radius all as specified.

M&L for cutting into existing manholes for connecting new drains, making good to 100mm pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required etc. complete all as specified and as directed.

Removing building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles etc. complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for etc. complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(below or above ground level) (reinforcement cut as required to facilitate demolition) etc. complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in unframed work, in any position etc. complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified and as directed.

Dismantling structural/ mild/ wrought steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and as directed.

Taking down PVC (SWR) pipes 75mm/ 110mm bore set in cement mortar including all fittings etc. complete all as specified and as directed.

Taking down carefully Unserviceable aluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc , removing all material for reuse/ issued under sch of credit and making good the distrubed surface as the existing one, etc. complete all as specified and as directed.

Material & Labour for taking out Geyser from the old location of any capacity & refixing etc. complete all as specified and as directed.

Material & Labour for taking out Exhaust fan from the old location of any capacity & refixing etc. complete all as specified and as directed.

Taking down ceiling fan & dismantaling blades & refixing of the same including provision of suitable size of fan down rod below the false ceiling height as per the site requirement, Painting of Ceiling Fan complete with Syntetic enamel paint by spray painting including filling patty work connecting up including provision of cable from ceiling rose or connector to fan etc. complete all as specified and as directed.

Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit Concealed in walls/ floors/ ceiling etc with and including fixing of metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,etc complete all as specified and directed.

One light point controlled by one way switch

One Ceiling fan point controlled by one way switch

One Exhaust fan point controlled by one way switch

One 3 pin socket point 5 Amps on Same board.

One 3 pin socket point 5 Amps on independent board.

One bell Point controlled by one push button 5 Amps switch on independent board

All as per item No 131 here-in-before but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 2.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps socket outlet independently etc complete all as specified and directed.

Supply and fixing of LED Light fitting of 16 Watts, 220 volts, etc complete all as specified and directed.

Supply and fixing of 15 Watts LED Light fitting Downlighter, Panel Round glare free light etc complete all as specified and directed.

Supply and fixing of LED Street Light fitting of 45 Watts, 220 volts, IP 65/66 Protection complete with driver, holder including connecting up with 2 core flexible copper conductor cable of suitable size etc complete all as specified and directed. Make CG, Model : FREEDOM NEO, CAT : LSTS-25-CDL-M or equivalent in HAVELLS /BAJAJ /PHILIPS

Supply and fixing of Post top lantern 360 * indirect light with IP 65 Protection 40 watts etc complete all as specified and directed. Make : CG, Model : Maple lpto-40-CDL-M or Equivalent in BAJAJ/PHILIPS/HAVELLS

Supply & fix switch modular type single pole 1 way 5 Amp 230 volt etc complete all as specified and directed.

Supply and Fixing of modular type Bell push 6 A, 1 Module etc complete all as specified and directed.

Supply and Fixing of Bell, AC, 230 volts, Single Pole etc complete all as specified and directed.

Supply & fix switch modular single pole 1 way 6 Amp 230 volt etc complete all as specified and directed.

Supply & fix switch modular single pole 1 way 16 Amp 230 volt etc complete all as specified and directed.

Supply & fix socket 6 Amps modular type, 230 volts etc complete all as specified and directed.

Supply & fix Socket 6A/16A - modular type 230 volts etc complete all as specified and directed.

Supply and fixing of modular type fan regulator upto 300 watts with 5 step speed control for fans any sweep 1200 mm/1400 mm etc complete all as specified and directed.

Supply and fixing of modular white cover plate with frame, 1 module etc complete all as specified and directed.

Supply and fixing of modular white cover plate with frame, 2 module etc complete all as specified and directed.

Supply and fixing of modular white cover plate with frame, 3 module etc complete all as specified and directed.

Supply and fixing of modular white cover plate with frame, 4 module etc complete all as specified and directed.

Supply and fixing of modular white cover plate with frame, 6 module etc complete all as specified and directed.

Supply and fixing of modular white cover plate with frame, 8 module etc complete all as specified and directed.

Supply and fixing of metal flush box 1/2 module etc complete all as specified and directed.

Supply and fixing of metal flush box 3 module etc complete all as specified and directed.

Supply and fixing of metal flush box 4 module etc complete all as specified and directed.

Supply and fixing of metal flush box 6 module etc complete all as specified and directed.

Supply and fixing of metal flush box 8 module etc complete all as specified and directed.

Supply & fix of MCB SP 6 to 32 Amps 240 volts 10 KA rupturing capacity etc complete all as specified and directed.

Supply & fix MCB SPN 6 to 40 Amps 240 volts 10 KA rupturing capacity etc complete all as specified and directed.

Supply & fix MCB TPN 40 Amps 240 volts 10 KA rupturing capacity etc complete all as specified and directed.

Supply and fixing of DB, SPN 8 ways, Double door typeetc complete all as specified and directed.

Supply and fixing of DB, TPN 8 ways, Double door type etc complete all as specified and directed.

Supply & fix ceiling rose surface backelite two to three terminal etc complete all as specified and directed.

Material and labour for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised iron earth lead 4 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on completion etc complete all as specified and directed.

Supply & fixing of Galvanised steel wire 4.00 mm Dia etc complete all as specified and directed.

M&L for sub main wiring complete with 2 runs of 4.00 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 4.00 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring etc complete all as specified and directed.

M&L for sub main wiring complete with 2 runs of 6.00 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 4.00 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring etc complete all as specified and directed.

M&L for sub main wiring complete with 4 runs of 6.00 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 runs of 6.00 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring etc complete all as specified and directed.

B.B.Enterprise

M/s BHOOMI ELECTRICALS