PROVISION OF CEMENTED GARBAGE DISPOSAL BIN IN RESIDENTIAL AREA ADD ALT OF ALUMINIUM WINDOWS VENTILATORS IN LIEU OF WOODEN WINDOWS VENTILATORS IN L M J BLDGS AND PROVISION OF CERTAIN REV WORKS REV03 04 AT NAVAL STATION KARANJA

Amount

Taking down chowkats of frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm & not exc 4 Sqm complete all as specified and directed.

Taking down chowkats of frames with shutters (without taking off shutters from the frames)n exc 1.5.Sqm complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples complete all as specified and directed.

S&F powder coated aluminium anodised frame with sliding windows/openable window/ventilaors/fixed windows with one or more rebates including jointing cleat for fixing etc. (minimum thicnkness of powder coating 15 micron). Complete all as specifiied and as directed.

S&F star lock for window incl all necessary fittings complete all as specified and as directed.

S&F aluminium louvers with levers and locking arrangement suitable for fixing including100mm wide 4 to 6 nos frosted glass complete all as specified and directed.

S&F Sheet glass 4.0mm thick, ordinary quality fixed in aluminium window in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Sheet glass 4.0mm thick, ordinary quality fixed in aluminium window in square but exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 4.0mm thick frosted glass in square fixed in aluminium ventilaor but nexc 0.5 sqm in each pane complete all as specified and directed.

S&F rubber beading suitable for fixing 4mm/5mm thick glass in panels of aluminium doors/windows/ventilators. Complete all as specified and directed.

S&F aluminium (anodized) grill of design DG 104 pattern, made out of 10mm thick dia, rod fixed with and inclding standard aluminium frame of 'F' section of size 23.40mm x 15.30mm and 1.4mm thick all as per manufacturers instructions and as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, window jambs, dado & pillar over 15mm thick screed bed in CM (1:6) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc, including raking out joints, hacking for key, scrubbing down with water etc, and removing to premises outside MD land all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M & L for preparation of new/old surfaces of walls and applying two coats of distemper oil emulsion (OBD) over a 3mm thick wall care putty on plastered surfaces with alkali resistant priming paint complete all as specified and directed

Surface excavation nexc 30cm deep and getting out in soft and loose soil complete all as specified and directed.

Excavation in trenches n'exc 1.5 mtr depth and n'exc 1.5 mtr wide in soft/loose soil and getting out complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40mm graded stone agg as in fdn filling mass concrete complete all as specified and directed.

M & L Brick work with Sub-Class 'B' bricks, straight or curved on plan exc 6m mean radius built in (1:6) CM complete all as specified and directed.

M&L Hardcore of gauge n exc 63mm, deposited, spread and levelled in layer n exc 15cm thick watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

M & L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection/footpath etc complete all as specified and directed.

M&L 100 mm thick Cement concrete type B-2 1:2:4 (40 mm graded aggregate)as in floor complete all as specified and directed.

M&L for Forming construction joint (Dummy joints) 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and directed.

M & L 15mm thick rendering in cm(1:4) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as specified and directed.

S&F Expended metal (n exc 4 kg/sqm),cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples complete to wood or steel members complete all as specified and directed.

M&L flat iron fillets to the fencing posts/post incl all necessary drilling bolting or riveting, welding etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for preparation of new plaster surface exceeding 10cm and applying two coats of synthetic enamel paint over primer complete all as specified and directed.

M & L for preparation of new plaster surface and applying Three coat of white wash complete all as specified and directed.

M&L for steel work in tubular trusses /posts, including special shaped fixing with guset plate washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 - 1979 graded SI 240 complete all as specified and directed.

M&L pcc 1:3:6 type C1 20mm grade aggregate as in padding, hold fast/ filling of chowkhats or similar work complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply only intergral water proofing compound

M&L providing chequered cement concrete coloured tiles 20cmx20cmx25mm thick set, jointed and pointed in net cement slurry with grey cement and pigment and laid over and including seceed bed or bedding layer 20mm thick in CM 1:4 as in floors and complete all as specified and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply, fix ,test & commission of conventional type fire alarm control panel of 04 zone to work on single phase AC supply 50 HZ fabricated out of CRCA sheet steel 1.6 mm thick duly painted with CRCA sheet steel over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint first quality of approved colour for panel board with battory backup up to 12 hour including wiring with suitable copper conductor cable Form panel to floor level manual call point and upto smoke/ heat detector if required all as specified and directed by Engineer-in-charge of make : Apollo/ Kheraj/ Sunfire/ Ex Flame.

Supply & fix manual call point red coloured surface mounting type of standard size with alarm raising push button, plastic coated glass element in and out terminal metal hammer with chain etc complete all as specified and directedmake :Apollo/ Kheraj/ Sunfire/ Ex Flame

Supply & fix smoke detector confirming to E- 54.7 standard of size 100mm dia, height 56mm suitable to work on 24V DC (12 V DC - 28 V DC) fixed with LED made out of frame retardant plastic confirming to fire protection standard complete all as specified and directed. Make : Appolo/Vijay/Nitin/ Sunfire

Supply & fix heat detector automatic reset type (class air series 65) complete all as specified and directed Make : Appolo/Vijay/Nitin/ Sunfire

Supply & fix fire alarm hooter with speaker suitable for PA system all as specified & directed.Make - Cease Fire/ Safezone/ Vrajesh/Kheraj/ Sunfire

Supply and fix 1.5 sqmm 4 core armoured copper conductor cable ISI marked complete all as specified and directed make : Plaza/Havells/Polycab/ Gloster

Returning filling in trenches incl spreading, levelling, watering & well ramming in layers not exc. 25cm thick each layers as in soil complete all as specified and directed

Removing excavated materials (soil) n.exc. 50m & depositing where directed at alevel n.exc.1.5m above from starting point complete all as specified and directed

Supply, fixing laying & testing galvanised iron water tubing medium grade with and incl all GI fittings such as flanges, reducer sockets, socket reducing bends, elbows tee, checknuts, caps plugs etc. fixed complete to walls and ceiling or laid in floors/trenches complete all as specified and directed

50mm bore

40mm bore

25mm bore

S&F monobloc pump set suitable for 415V TPN system having capacity 2 HP, 50hz, 3 phase complete all as specified and directed . Make: Kirloskar or equivalent

S&F DOL Starter for 2 HP pump incl sheet metal enclosure incl suitable 10 sqmm 3 core cable with necessary wiring and fixtures complete all as specified and directed

M&L for gun metal gate valve screwed to GI tubing of size 50mm dia, complete all as specified and directed

M&L for gun metal gate valve screwed to GI tubing of size 40mm dia, complete all as specified and directed

M&L for gun metal gate valve screwed to GI tubing of size 25mm dia, complete all as specified and directed

M.K Enterprises

M/s S.D Construction Co

Pheonix Engineers & Contractors