GE/SRA/T-18/2024-25

Amount

BED PLYWOOD TOP (Drawing No. FD-246 & FD-247)

M&L in repairs PLYWOOD TOP 1800x900mm in size, 12mm thick, 5 Ply, BWR Grade, ISI Marked, fixing with Steel Screws complete all as specified and directed.

M&L in repairs MILD STEEL PLATE 35x5mm in size, L-shape provided under Long Rail and Legs of Head Board and Foot Board, made to Shape and Size and fixing with Steel Screw complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying two Coats of French Polish (best qualiity as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

TABLE BED SIDE MAP

S&F in repairs Mild Steel handle (as approved), best quality suitable for Drawer complete all as specified and directed.

S&F in repairs mild steel Telescopic Channel (as approved), best quality suitable for Drawer complete all as specified and directed.

CHAIR EASY (Drawing No. FD-229)

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces to obtain a High Glossy Finish, complete all as specified and directed.

S&F in repairs NYLON BUFFERS (Set of 4 No) and fixing with Steel Screw on Legs complete all as specified and directed.

CHAIR DINING (Drawing No. FD-279)

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying two Coats of French Polish (best quality as approved) on Exposed Surfaces of to obtain a High Glossy Finish, complete all as specified and directed.

S&F in repairs NYLON BUFFERS (Set of 4 No.) and fixing with Steel Screw on Legs complete all as specified and directed.

CHAIR WRITING (Drawing No. FD-280)

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots, scrubbing with Emery Paper to obtain a smooth surface, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces to obtain a High Glossy Finish, complete all as specified and directed.

S&F in repairs NYLON BUFFERS (Set of 4 No.) and fixing with Steel Screw on Legs complete all as specified and directed.

SIDE BOARD (Drawing No. FD-241)

M&L in repair BOTTOM, made out of 18mm thick Block Board and complete all as specified and directed.

M&L in repair DRAWER, made out of 18mm thick Block Board with 6.0mm thick Plywood Board as Drawer Bottom including Knob complete all as specified and directed.

M&L in repair SHELF, made out of 18mm thick Block Board Both Side laminated with 6.0mm thick Teak Wood Beading fixing with Steel Screw complete all as specified and directed.

S&F in repairs steel handle, fixing with Steel Screw complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

TABLE DRESSING LADIES (Drawing No. FD-251 & FD/E6/MAP-II/07)

S&F in repairs GLASS SHUTTER 5.0mm thick complete all as specified and directed.

S&F in repairs LOOKING MIRROR 5.0mm thick including Repairing/ Jointing of Mirror Frame, made to Shape and Size complete all as specified and directed.

M&L in repairs TOP made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet Natural Teak Face shade complete all as specified and directed.

M&L in repairs BOTTOM, made out of 18mm thick Block Board complete all as specified and directed.

M&L in repairs BACK PLY of BOX, made out of 12mm thick Plywood Board, Commercial Face, ISI marked including Key Plate complete all as specified and directed.

M&L for First Class Hardwood FRAME of MIRROR, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood LEG , made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for DRAWER, made out of 18mm thick Block Board, 6.0mm thick Ply to Drawer's Bottom and Front of Drawers covered with 1.0mm thick Laminated Sheet Teak Face shade including Aluminium anodise Knob and Fixed-in-repairs, complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

TABLE DRESSING GENTS (Drawing No. FD-230)

S&F in repairs LOOKING MIRROR 5.0mm thick complete all as specified and directed.

M&L in repairs TOP, made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet Natural Teak Face shade complete all as specified and directed.

M&L in repairs BOTTOM, made out of 18mm thick Block Board complete all as specified and directed.

M&L in repairs BACK PLY of BOX, made out of 12mm thick Plywood Board, Commercial Face, ISI marked including Key Plate complete all as specified and directed.

M&L in repairs SIDE, made out of 12mm thick Plywood Board, Commercial Face, ISI marked complete all as specified and directed.

M&L in repair DRAWER, made out of 18mm thick Block Board, 6.0mm thick Ply to Drawer's Bottom and Front of Drawers covered with 1.0mm thick Laminated Sheet Teak Face Shade including Aluminium anodised Knob complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying Coat of French Polish (best quality as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

TABLE WITH /WITHOUT DRAWER 900x600x760 mm (Drawing No. FD-224 & FD-284)

M&L for TOP of made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and Fixed-in-repairs, complete all as specified and directed.

TABLE WRITING (Drawing No. FD-249 & FD-275)

M&L for First Class Hardwood LEG, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for TOP made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and Fixed-in-repairs, all as specified and directed.

M&L for DRAWER made out of 19mm thick Prelaminated Particle Board Teak Face with 6.0mm thick Ply to Bottom of Drawers including Aluminium Anodised Knob and Fixed-in-repairs, complete all as specified and directed.

S&F in repairs Knob, fixing with Steel Screw alround complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces of except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

M&L CUP BOARD WITH SHUTTER, made out of 18mm thick Block Board covered with 1.0mm thick Laminated Sheet, 6.0mm thick Teak Face Plywood to Back Side including Wall Catcher and Fixed-in-repairs, complete all as specified and directed.

TABLE CENTRE (Drawing No. FD-274)

M&L for TOP of size 900x450 mm made out of 19mm thick Prelaminated Particle Board Natural Teak face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood LEG made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

TABLE COMPUTER (Drawing No. FD/E6/MAP-03)

M&L for TOP made from 19mm thick Prelaminated Particle Board including Beading 4.0mm thick, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for KEY BOARD TRAY made from 19mm thick Prelaminated Particle Board fitted with suitable Telescopic Channel including Beading 4.0mm thick, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for DRAWER made from 19mm thick Prelaminated Particle Board including Beading 4.0mm thick, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for SHELF made from 19mm thick Prelaminated Particle Board including Beading 4.0mm thick, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

S&F in repairs HARD RUBBER SHOES, made to Shape and Size and fixed with screws, complete all as specified and directed.

TABLE BED SIDE (Drawing No. FD-210 & FD-276)

M&L for TOP made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade and Fixed-in-repairs, complete all as specified and directed.

M&L for SIDE made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade and Fixed-in-repairs, complete all as specified and directed.

M&L for BACK made out of 6.0mm thick Ply Commercial Face and Fixed-in-repairs, complete all as specified and directed.

M&L for SHELF made out of 12mm thick Prelaminated Particle Board Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw to Front Side and Fixed-in-repairs, complete all as specified and directed.

BOOK CASE (TP)

S&F 8.0mm thick Glass of size 780mm x310mm duly grinded all round for Book Case Four Drawers(Make Godrej, Model No. SBC100XXXT) made to shape and size and Fixed-in-repairs, complete all as specified and directed.

BOOK CASE WOODEN (Drg No. FD-237)

M&L for SHUTTER, made out from Block Board 18mm thick covered with Laminated Sheet 0.8mm thick, fixing with and including Continuous Hinge Piano, Aluminium anodized Knob made to shape and size including taking out damaged Shutter, complete all as specified and directed.

M&L for SIDE, made out from Block Board 18mm thick covered with Laminated Sheet 0.8mm thick, made to shape and size incl taking out damaged Side, complete all as specified and directed.

M&L for TOP, made out from Block Board 18mm thick covered with Laminated Sheet 0.8mm thick, made to shape and size incl taking out damaged Top, complete all as specified and directed.

M&L for preparing old polished (partly)/new (partly) surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One or More Coats of French Polish (best quality as approved) on Exposed Surfaces to obtain a High Glossy Finish, complete all as specified and directed.

TEAPOY (Drawing No. FD-232 & FD-278)

M&L for TOP, made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging alround and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood LEG, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood LONG BATTEN, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood SHORT BATTEN, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

PEG TABLE (Drawing No. FD-236 & FD-277)

M&L for TOP made out of 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood LEG, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood LONG BATTEN, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood SHORT BATTEN, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for preparing Old Polished (Partly)/New (Partly) Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

TABLE DINNING 6/8 PERSONS (Drawing No. FD-273)

M&L for TOP for 6 persons table, made out from 19mm thick Prelaminated Particle Board Natural Teak Face shade including 6.0mm thick Teak Wood Edging fixing with Steel Screw alround and Fixed-in-repairs, complete all as specified and directed.

M&L for First Class Hardwood LEG, made to Shape and Size and Fixed-in-repairs, complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying One Coat of French Polish (best quality as approved) on Exposed Surfaces except on Top Plywood to obtain a High Glossy Finish, complete all as specified and directed.

CHAIR DINING CUSHIONED (Drawing No. FD/E6/MAP/10(R))

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying two Coat of French Polish (best quality as approved) on Exposed Surfaces to obtain a High Glossy Finish, complete all as specified and directed.

M&L for First Class Hardwood FRONT LEG, made to shape and size including taking out broken Rear Leg, complete all as specified and directed.

M&L for First Class Hardwood REAR LEG, made to shape and size including taking out broken Rear Leg, complete all as specified and directed.

S&F in repairs SEAT CUSHION 75mm thick, 32 density, covered with new Tapestory Cloth (not less than Rs. 300.00 per RM) fixing on existing plywood complete all as specified and directed.

S&F in repair COVER CUSHION, 32 density, covered with new Tapestory Cloth (not less than Rs. 300.00 per RM) made to shape and size complete all as specified and directed.

S&F in repairs NYLON BUFFERS (Set of 4 No.) and fixing with Steel Screw on Legs complete all as specified and directed.

HAT STAND (Drawing No. FD-362 & FD-233)

M&L for top made out from teak wood, including taking out unserviceable top complete all as specified and directed.

S&F in repairs Aluminum Hook complete all as specified and directed.

S&F in repair looking mirror of size 400x250mm, 5 mm thick complete all as specified and directed.

CHAIR DINING WITH LONG BACK (OFFICERS MESS) (Drawing No. FD-357)

S&F in repair SEAT CUSHION 50mm thick, 32 density made to shape, covered with new leatherite rexine fixing on existing plywood complete all as specified and directed.

S&F in repair BACK CUSHION 50mm thick, 32 density made to shape, covered with new leatherite rexine fixing on existing plywood complete all as specified and directed.

M&L for preparing Old Polished Surfaces by scrapping unwanted Spots on Wood or Wood based Materials, providing Putty to Stop Holes, etc. and applying two Coats of French Polish (best quality as approved) on Exposed Surfaces to obtain a High Glossy Finish, complete all as specified and directed.

M&L for First Class Hardwood FRONT LEG, made to shape and size including taking out broken Rear Leg, complete all as specified and directed.

M&L for First Class Hardwood REAR LEG, made to shape and size including taking out broken Rear Leg, complete all as specified and directed.

M&L for First Class Hardwood SIDE/ FRONT/ BACK RAIL, made to shape and size including taking out broken Side/ Front/ Back Rail, complete all as specified and directed.

M&L for First Class Hardwood BACK REST (HORIZONTAL & VERTICAL STRIP), made to shape and size including taking out broken Back Rest, complete all as specified and directed.

M&L for First Class Hardwood STIFFNER (SIDE & CENTRAL ONE), made to shape and size including taking out broken Stiffner, complete all as specified and directed.

YOGINDER KUMAR GUPTA AND COMPANY

M/S SUNIL TRADERS

DCM ENTERPRISES