GE I R AND D/CHD-22/2026-27 CERTAIN REPAIRS TO JOINERY, CEILING AND MISC WORKS IN SECTOR 24, 37, 38 AND 42 AT CHANDIGARH

Taking down existing aluminium door/ window shutters or partitions with frames, with or without glazing including fittings and removing from site complete all as specified and directed.

Refixing existing aluminium door/ window shutters or partitions with frames, with and including all necessary fittings and fixtures such as cleats, glazing clips, rubber neiprene packing etc as per site requirement complete all as specified and directed. (Retreived from Sr Item No. 1 above) Note:- Particle board and glass shall be measured and paid for separately under appropriate item

Supply and fixing for powder coated any colour (thickness of coating not less than 50 micron) anodised aluminum door/window shutters aluminium section having weight 0.79 Kg per Running metre with and including necessary joining cleats, glazing clips, rubber neiprene packing, (handles 2 Nos,three hinges,150mm long Aluminium tower bolts 2 No, door stopper in each shutter ) anodised aluminium snap beading, screws etc. complete all as specified and directed. (Glazing, shall be measured and paid for separately)

Supply and fixing for powder coated any colour (thickness of coating not less than 50 micron) aluminium frame for doors, windows, ventilators, partition etc. with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

Supply and fixing for 5.5mm thick tinted sheet glass fixed to aluminium frame work using anodized aluminium bead,with and including rubber beading & packing, in panels exc 0.5 square metre in each pane, complete all as specified and directed.

Material and labour for fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with and including rubber beading and anodised aluminium beading and C.P. brass / stainless steel screws etc complete all as specified and directed

Supply and fixing for powder coated aluminium window shutter glazed and wire gauze sliding shutters (three track) with and including aluminium window frame or chowkatws 1.5 mm thick aluminium anodized of size 100MM X 40mm and window shutter frames glazed and wire gauze (middle, toprail, bottom rail) and styles 1.5 mm thick aluminium anodized of size 44.50 mm x 44.50 mm including all fittings such as rubber gasket aluminium glazing beadings, self locking arrangement with aluminium handle of suitable size, 5.5 mm thick tinted glass for glazed window shutter, stainless steel wire mesh for gauze shutter and hook and eye for each shutter including aluminium grill of design and pattern as approved complete all as specified and directed.

Material and labour for brickwork with subclass `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement morter 1:4 using old side brick omplete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM 1:4 on concrete/brick surfaces finished even and smooth complete all as specified and directed.

Material and labour for door closer hydraulically regulated aluminum (die cast) body, designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg, fixed as in repairs, complete all as specified and directed.