SPL REPAIR TO BLDG NO T141 OF DOGRA SCOUT AND T233 AND 234 OF 4 SIKH LI AT SUMDO UNDER GE 863 EWS

Amount

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided completed all as specified and directed by Engr in Charge.

M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite completed all as specified and directed by Engr in Charge.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match completed all as specified and directed by Engr in Charge.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match completed all as specified and directed by Engr in Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises completed all as specified and directed by Engr in Charge.

M & L for glazed ceramic coloured tiles in vertical surface such as skirting, dados and rises to steps etc 350x 250x 7 mm/ 450X 350X 7mm thick over 10mm thick cement morter in CM 1:6, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile completed all as specified and directed by Engr in Charge.

M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement completed all as specified and directed by Engr in Charge.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings completed all as specified and directed by Engr in Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified completed all as specified and directed by Engr in Charge.

S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc completed all as specified and directed by Engr in Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws completed all as specified and directed by Engr in Charge.

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc completed all as specified and directed by Engr in Charge.

M&L Roof trusses (framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Fe 410-W (Gde E- 250) quality A completed all as specified and directed by Engr in Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 (Gde-E- 250) quality-A) completed all as specified and directed by Engr in Charge.

S&F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required completed all as specified and directed by Engr in Charge.

M&L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) completed all as specified and directed by Engr in Charge.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) completed all as specified and directed by Engr in Charge.

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each completed all as specified and directed by Engr in Charge.

Taking down shutters of any description area exc 2 sqm each completed all as specified and directed by Engr in Charge.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) completed all as specified and directed by Engr in Charge.

Taking down chowkhats or frames with shutters not exc 1.5 Sqm each (without taking off shutters from the frame) completed all as specified and directed by Engr in Charge.

S & F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats completed all as specified and directed by Engr in Charge.

S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple completed all as specified and directed by Engr in Charge.

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized completed all as specified and directed by Engr in Charge.

S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engineer-In-Charge.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. completed all as specified and directed by Engr in Charge.

S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,nodised aluminum snap beadingscrews etc. completed all as specified and directed by Engr in Charge.

S&F anodised aluminium frame for doors, windows, ventilators fabricate & fix anodised aluminium sliding windows/ ventilators with one or more rebates including joining cleat for fixing etc. completed all as specified and directed by Engr in Charge.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction completed all as specified and directed by Engr in Charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads completed all as specified and directed by Engr in Charge.

M&L for 5.5mm thick sheet glass in squares exceeding .50 Sqm in each pane with oil putty in completed all as specified and directed by Engr in Charge.

S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple completed all as specified and directed by Engr in Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets completed all as specified and directed by Engr in Charge.

M&L for 6mm thick decorative veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame work as in wall pannelling/ceiling/cup board shutters completed all as specified and directed by Engr in Charge.

Dismantling Unframed timber scantlings under 40 sq. cm in fillets, rails, posts, rafters, purlins, etc. in any position completed all as specified and directed by Engr in Charge.

M&L 2nd class hard wood for Plain fillets exc 13 sq.cm but n.exc 25 sq.cm, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-charge.

All as per item above exc 6 sq.cm but n.exc 13 sq.cm but bull nosed, splayed, chamfered or rounded on one edge or face for corner completed all as specified and directed by Engr in Charge.

M&L 2nd class hard wood for Plain fillets n.exc 3 sq.cm, rectangular or triangular in section, clean sawn, secured with nails or brads completed all as specified and directed by Engr in Charge.

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position completed all as specified and directed by Engr in Charge.

M&L clean sawn 2nd class hard wood in scantling timber framed work fixed with screws/ nails complete all as specified and directed by Engr-in-charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including cover and completed all as specified and directed by Engr in Charge.

S&F in repair CP jet Spray with 15mm bore flexible connecting pipe complete with all assembly completed all as specified and directed by Engr in Charge.

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern completed all as specified and directed by Engr in Charge.

S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , completed all as specified and directed by Engr in Charge.

S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type,one pair of fixing brackets , 60cm long between flanges completed all as specified and directed by Engr in Charge.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws Soap dish, vitreous China white, ap proximate size 160x 160x90 completed all as specified and directed by Engr in Charge.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all completed all as specified and directed by Engr in Charge.

S&F in repair brass CP Stop cock/ Angle cock 15 mm fancy type choromium platedetc, completed all as specified and directed by Engr in Charge.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm completed all as specified and directed by Engr in Charge.

S&F in repairs pillar taps 15mm dia cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm completed all as specified and directed by Engr in Charge.

S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia completed all as specified and directed by Engr in Charge.

S&F PVC waste pipe 32mm bore with cup and washers for WHB complete on new or old locations completed all as specified and directed by Engr in Charge.

S&F in repair C.P. grating 100mm square/round with or without hole, completed all as specified and directed by Engr in Charge.

S&F in repairs of UPVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement completed all as specified and directed by Engr in Charge.

Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store completed all as specified and directed by Engr in Charge.

S&F PUF insulated cylndrical tank of capacity 500 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hinged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specification completed all as specified and directed by Engr in Charge.:- (a) Inner tank will be double layered HDPE food grade material. (b) Outer 4mm thick FRP jointless casing of tank. (c) Thickness of PUF insulation shall be 75mm. (d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%. MAKE-ACE or equivalent.

S & F in repair 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, completed all as specified and directed by Engr in Charge.

S & F in repair 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, completed all as specified and directed by Engr in Charge.

Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store completed all as specified and directed by Engr in Charge.

Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store completed all as specified and directed by Engr in Charge.

Taking up or down 25 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed.

S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches completed all as specified and directed by Engr in Charge.

S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches completed all as specified and directed by Engr in Charge.

S&F 25mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches completed all as specified and directed by Engr in Charge.

Dismantling of cast iron ,PVC or reinforced concrete pipes 110 mm/ 75mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia completed all as specified and directed by Engr in Charge.

S & F 75mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, completed all as specified and directed by Engr in Charge.

S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, completed all as specified and directed by Engr in Charge.

S & F 75 mm dia bore PVC (SWR) bends any radius, completed all as specified and directed by Engr in Charge.

S & F 110 mm dia bore PVC (SWR) bends any radius, completed all as specified and directed by Engr in Charge.

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, completed all as specified and directed by Engr in Charge.

S & F 75 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, completed all as specified and directed by Engr in Charge.

S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls completed all as specified and directed by Engr in Charge.

S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls completed all as specified and directed by Engr in Charge.

Demolition of precast concrete block walling built in cement morter completed all as specified and directed by Engr in Charge.

M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 completed all as specified and directed by Engr in Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified and directed by Engr in Charge.

M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement completed all as specified and directed by Engr in Charge.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint completed all as specified and directed by Engr in Charge.

M & L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed I neat cement slurry and pointed in white or coloured cement to match in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match completed all as specified and directed by Engr in Charge.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane completed all as specified and directed by Engr in Charge.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in ceiling/ Vertical Surface etc completed all as specified and directed by Engr in Charge.

S & F second class hardwood plain fillets, wrought, square, retangular or triangular in section, secured with screws, cross sectional area exc 3 Sqcm and not exc 6 Sqcm completed all as specified and directed by Engr in Charge.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. completed all as specified and directed by Engr in Charge.

S and F Steel windows for industrial buildings, fixed type, with glazing bars completed all as specified and directed by Engr in Charge.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. completed all as specified and directed by Engr in Charge.

S and F Mild steel barrel tower bolts, 150 mm long stove enamelled black, with bright bolt and fixed completed all as specified and directed by Engr in Charge.

S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor with ocerall length of over plate 140mm completed all as specified and directed by Engr in Charge.

S and F 125 mm long MS Butt hinges medium weight, cold rolled mild steel, and fixed completed all as specified and directed by Engr in Charge.

S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs completed all as specified and directed by Engr in Charge.

S & F in repair 300mm ordinary rat tail tod pattern springs including roller and roller plate complete all as specified and directed by Engr in Charge

M & L for rendering 15mm thick in cement plaster 1:4 onon fair faces of brick / block work or concrete surfaces finishing even and smooth without using extra cement completed all as specified and directed by Engr in Charge.

M & L for preparation of old plaster surfaces of any description, not otherwise described, applying two coat of cement base paint (first quality) completed all as specified and directed by Engr in Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, , pendents, regulators sockets, light fittings , holder, bell push, ding dong etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed suefaces of walls, floor etc completed all as specified and directed by Engr in Charge.

M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 97 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per srl item no 97 here-in-before but controlled with one 3 pin socket 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

All as per srl item no 97 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of socket outlet 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent.

Supply and fixing switch piano type 15 Amp, 230 Volts flush button single pole one way complete all as specified and directed by Engineer-in-Charge.

Supply and fixing socket outlet 3 pin 15 Amp, 2-in one , 230 volts flush type230 Volts flush type complete all as specified and directed by Engineer-in-Charge.

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent.

S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable completed all as specified and directed by Engr in Charge.

Supply and fixing LED Lamp 12 Watt in lamp (bulb) holder completed all as specified and directed by Engr in Charge.

Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc completed all as specified and directed by Engr in Charge.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and direct by Engineer-in-Charge .

Supply and fixing in replacement of isolator SPN 40 AMP rating 240V, 10KA 'C' curve in the DB complete with connection testing and commissioning all ass directed by Engineer in Charge.

Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning completed all as specified and directed by Engr in Charge.

M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works ans CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and lugs GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost.

Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete

Supply and fixing air termination single pointed aluminium rod 12 mm 300 mm long include fixing on aluminium flat saddle on roof/wall with ms clamp/ nut bolt washer complete all as specified and directed.

M&L for Aluminium strip 25 x 3mm with saddles and fixing screws etc for roof conductor and down conductors above ground for fitting the strips.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth strip 32 x 6 mm means of bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze size drilled and screwed including75x75x25mm 3 nos. 8mm dia 25mm long hex. head screw completed all as specified and directed by Engr in Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc completed all as specified and directed by Engr in Charge.

Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 200 mm sweep with, blades, and frame and louvers completed all as specified and directed by Engr in Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completed all as specified and directed by Engr in Charge.

S & F replacement LED integrated batten tube light fittings 10 W 2 feet long complete with twin core twisted flexible copper conductor cable complete all as specified and directed by Engr in Charge

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and direct by Engineer-in-Charge .

Supply and fixing in replacement of isolator SPN 63 Amp rating 240V, 10 KA'C' curve in the DB complete with connection testing and comissioning all as specified and directed by Engr in Charge.

Schedule of Credit

M/S PYARE LAL (BID ID -3449368)

M/S Gopal Singh (BID ID -3451702)