Construction of 02 room Store building at Town Hall Basohli.

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm and upto 1.5m in depth, 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50 mtr and lift upto 1.50 mtr., disposed earth to be leveled and neatly dressed in: a) All kind of soils

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering –All work upto plinth level (including all leads and lifts carriages of material by MT/HL).

a) 1 : 4 : 8 (1 cement : 4 fine sand : 8 graded nallah stone aggregate 40mm nominal size).

b) 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL).

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in foundation plinth in cement mortar 1:6 (1 cement : 6 fine sand) (including all leads and lifts carriages of material by MT/HL).

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means).

Providing and laying Reinforced cement concrete 1:1.5:3(1 Cement: 1.5 Coarse Sand: 3 graded crushed stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircases having upto 15° slope excluding the cost of centering & shuttering. All works upto Floor V level.a) 1: 1.5: 3 (1 Cement: 1.5 Coarse Sand: 3 graded crushed stone aggregate 20 mm nominal size) (including all leads and lifts carriages of material by MT/HL).

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. a) Cold twisted bars.

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) (including all leads and lifts carriages of material by MT/HL).

Extra for Half-brick masonary in superstructure above plinth level upto floor V level.

Centering and shuttering including strutting, propping etc. and removal of form work for:-

a) Foundations, footing, bases of columns etc for mass concrete.

b) Suspended floors, roofs landings balconies and access plate form.

c) Edges of slab and breaks in floors and walls under 20cm wide.

d) Lintels, beams, plinth beams girders, bressumers and cantilevers.

Filling available excavated earthwork (excluding rocks) in trenches , plinth, sides of foundation etc. in layer not exceeding 20 cm in depth : consolidating each layer by ramming and watering , lead upto 50 mts, lift 15 mts).

6mm cement plaster to ceiling of mix 1: 3 (1 Cement:3 Fine sand) (including all leads and lifts carriages of material by MT/HL).

15 mm cement plaster on rough side of single or half brick walls of mix 1: 6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/HL).

12 mm cement plaster on rough side of single or half brick walls of mix 1: 6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/HL).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lungs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately Sal wood

Providing 40x 5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30 x 10 x 15 cm 1 : 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL).

Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 10 kg/ sqm (4mm thick) float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood

Providing and fixing 35mm thick panelled or panelled and glazed shutter for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excl. panelling which will be paid for separately, all complete as per direction of engineer-in charge Second Class Deodar wood:

Providing and fixing fly proof galvanized M.S. wire gauze to windows and clerestory window using galvanized M.S. wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63 mm all complete. a) with 2nd class teak wood beading 63x19mm.

Providing and fixing paneling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or paneled and glazed shutters 25mm to 40mm thick. a) Plain Particle board 12mm thick flat pressed, 3 layer or graded wood particle board medium density grade I, IS:3087 marked

Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete a) Fixed to openings / wooden frames with rawl plugs screws etc.

Steel work welded in built up section framed work including cutting , hoisting , fixing in position and applying priming coat of approved steel primer using structural steel etc. as required a) In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size crushed stone aggregate (including all leads and lifts carriages of material by MT/HL).

Cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement (including all leads and lifts carriages of material by MT/HL) i) 18mm thick.

Providing and fixing glass strips in joints of terrrazo/ cement concrete floor 40mm wide & 4mm thick

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing of aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws complete : a) 300x16mm

Providing and fixing of aluminum hanging floor door stopper ISI Marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws complete Single rubber stopper.

Providing and fixing of aluminum casement stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws complete :

Providing and fixing IS :3564 marked aluminium extruded section body tubular type universal hydraulic door closer (having superior brand) embossed on the body door weight upto 36-80 kg. and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminum tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

(ii) 200 x 10mm

Providing and fixing on wall face un-plasticized rigid PVC rain water pipes conforming to IS:13952 type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion a) 110mm dia.

Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. (Make Armocreate of SWC Chryso France) consisting of (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining was upto 300mm height including rounding of junction of walls and slaps. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (iv) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm / sq 3mm deep. (e) The whole terrace so finished shall be flooded with water far a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurras as 65mm. (including all leads and lifts carriages of material by MT/HL) i) 18mm thick.

Providing gola 75x75mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone agg. 10mm down gauge) including finishing with cement mortar 1:3 (1 cement:3 fine sand) as per standard design in 75x75mm deep chase (including all leads and lifts carriages of material by MT/HL) i) 18mm thick.

Making Khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1: 2:4 (1 cement: 2 coarse sand : 4 graded stone agg.20mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement rounding the edges & making and finishing the outlet complete (including all leads and lifts carriages of material by MT/HL) i) 18mm thick.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Applying priming coat With ready mixed red oxcide zinc chromate primer of approved brand and manufacture on galvanized iron/ steel work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats).

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @ 3.84 Kg /10 Sqm.

Colour washing such as green blue or buff to give an even shade.i) New work (two or more coats) with a base coat of white washing with lime.

Making plinth protection 50 mm thick of cement concrete 1: 3: 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed (including all leads and lifts carriages of material by MT/HL)

Wiring for light / fan point / exhaust fan point / call bell point with 1.5 sqm FRLS PVC insulated copper conductor core etc.

Wiring for light power plug 2x4 sqm FRLS PVC insulated copper conductor single core cable.

Wiring for circuit / sub main wiring along with earth wire the following size of PVC insulated copper conductor.

i) 2x1.5sqm+1x1.5sqm earth wire.

ii) 2x2.5sqmm+1x2.5sqmm earth wire.

Supply and fixing of following sizes of medium class PVC conduit alongwith accessories in surface /recessed including cutting etc.

Supplying and fixing suitable GI box wire modular plate and cover in front of surface with recess etc.

Supplying and fixing following modular switches / sockets on the existing modular plate & switch box.

a) 5/6 and switch

b) 3 pin 5/6 amp socket outlet

c) Fan Regular

d) Blank Plate.

Supplying and fixing following way single Pole and neutral sheet steel MCB distribution board etc.

Supplying and fixing 5 amp to 32 amp rating 240 volts ‘C’ Series miniature circuit breaker etc.

a) Single Pole (6/10/16 Amp).

b) Single Pole and neutral.

Supplying and fixing of following rating ‘C’ Series miniature circuit breaker etc.

Supplying and fixing of Angle / Bata Holder.

Supplying and fixing 18 watt compact flourcent lamp.

Supply and fixing following electrical lamps.

a) Fan Box

b) Deep Box

c) Phendic Raminate Sheet

Supplying and fixing of following electrical item suitable for operatic a) 16 sqm Twin core Aluminum cable.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Stone aggregate below (Crusher Bajree) 20mm size from Kathua for an average lead of 86.00 Km. by M.T. b) Sand from Kathua for an average lead of 86.00 km. by M.T. c) Stone aggregate above 40mm nominal size from lohai nallah for an average lead of 16.00 Km. by M.T. M.T. d) Bricks from Kathua for an av. lead of 86.00 Km. by

Sardar Singh

Anju Devi

Zakir Hussain

Narinder Pal Raina