Construction of Boys Hostel...

NS Item -Providing and fixing of Wooden fire rated doors as per BS:476 Part- 20 and 22 and IS 3614 part-1 and part-2 for stability, integrity and thermal insulation. 03 Criteria Wooden door confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI for maximum rating of 2hrs tested either with or without vision panel. Individual Test certificates should be available for glass used in vision lites confirming the required fire ratings.Any deviation in specification other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer Navair International Ltd or equivalent subject to architect’s approval. And should be ISO Certified company.Door leaf shall be minimum 50mm thick fully flush door with or without vision lite. 50mm thick shutter, comprising of 75mm x 44mm hardwood internal timber frame work, with infill of 48 kg/m3, ceramic fiber blankets, coated with VIPER FR intumuscent coating on both sides for insulation. The coated insulation shall be sandwiched between maximum 12mm thick HILUX Make Calcium Silicate Boards on both sides (edge to edge on internal Hardwood frame) having a maximum density of 900 Kgs/ Cum, cladded with 3mm ply commercial ply on both faces. (The same can be pasted with 1mm thick laminate (as per approved shade) or replaced with 4mm thick teak ply as per clients requirement at an extra cost) on both sides of the shutter, with 50mm x 10mm hard wood lipping all round the shutter. r. The rebate shall be of 20mm x 54mm in the Door Frame to accommodate the shutter . Both frame and shutter shall be fitted with intumescent Fire seal strips , The shutter fitted with 20x4mm Fire seal and Frame with 2 no. Fire seal of size 10x4mm on all the three sides of the except bottom. The pasting of the ply/veneer/laminate should be done using automatic machine and should be free from any nails or perforations. The same can be pasted with 1mm thick laminate (as per approved shade) or replaced with 4mm thick teak ply as per clients requirement at an extra cost) on both sides of the shutter, with 50mm x 10mm hard wood lipping all round the shutter. r. The rebate shall be of 20mm x 54mm in the Door Frame to accommodate the shutter . Both frame and shutter shall be fitted with intumescent Fire seal strips , The shutter fitted with 20x4mm Fire seal and Frame with 2 no. Fire seal of size 10x4mm on all the three sides of the except bottom. The pasting of the ply/veneer/laminate should be done using automatic machine and should be free from any nails or perforations. (FOR STAIRCASE and LIFT LOBBY) . Tata Parvez, Navair, Kutty Make with the prior approval of engineer-in-charge. (N.S.ITEM)

NS Item -Supply and fixing the door frame will be made out of Hardwood of maximum section 120 x 70mm and coated with VIPER Fire reatrdent Primer. (FOR STAIRCASE and LIFT LOBBY) . Tata Parvez, Navair, Kutty Make with the prior approval of engineer-in-charge. (N.S.ITEM)

NS Item -Supply and fixing SS Ball Bearing Hinges of size 100 x 75 x 3mm complet with SS Screws of BB1953 e ( 4 Nos per panel ) (For Fire Doors).Becker F.S - MS. Navair, Kutty Make with the prior approval of engineer-in-charge. (N.S.ITEM)

NS Item -Supply and fixing Panic Bar Double leaf panic bar. Becker F.S. Navair, Kutty Make with the prior approval of engineer-in-charge(N.S.ITEM)

NS Item -Supply and fixing PEL905 Becker F.S. Make Panic Trim For Operation From The Other Side Of The Panic Bar. (FOR STAIRCASE and LIFT LOBBY FOR FIRE DOORS). Tata Parvez, Navair, Kutty Make with the prior approval of engineer-in-charge (N.S.ITEM)

NS Item -Supply and fixing Mortise Dead Lock with 80mm cylinder body both side key DL7260 Becker F.S. Dead Lock Becker F.S. Dead Lock. (FOR FIRE DOORS). Tata Parvez, Navair, Kutty Make with the prior approval of engineer-in-charge (N.S.ITEM)

NS Item -Supply and fixing SS D Type Pull Handle of size 300mm mm Long of PHD2230. (FOR FIRE DOORS) Tata Parvez, Navair, Kutty Make with the prior approval of engineer-in-charge. (N.S.ITEM)

NS Item -Supply and fixing Door closers of BLC-604 (Required For All Fire Doors Except Shaft Door). Tata Parvez, Navair, Kutty Make with the prior approval of engineer-in-charge. (N.S.ITEM)

NS Item -Supply and fixing Stainless Steel 304 grade 300mm Long Tower Bolt of with necessary screws as required. (For Doors) Tata Parvez, Navair, Kutty Make with the prior approval of engineer-in-charge.

NS Item -Supply and fixing Anchor fastners of of maximum 120mm length. Make - (For Fire Doors) HILTI, FISHER, Ebco make with the prior approval of engineer-incharge. (N.S.ITEM)

NS Item -Supply and fixing IS-1212 S88 UL 1784-01 Smoke tested adhesive seal Make Smoke seal batwing type on all side of frame. (For fire doors) Make - LORIENT, Becker FS, PEMKO make with the prior approval of engineer-in-charge. (N.S.ITEM)

NS Item -Supply and fixing 5 MM thick clear Non wire 2 Hr Fire Vision glass 300x300mm. (For fire doors) Saint gobain, Asahi India glass ltd., Borosil make with the prior approval of engineer-in-charge. (N.S.ITEM)

NS Item -Providing and Fixing SS ball bearing hinge (4 x 3 x 3mm). (For Doors) Isuzul, Godrej, Hettich make with prior approval of Engineer-in-Charge. (N.S.ITEM)

NS Item -Providing and Fixing Tower bolt 12` Aluminium. (For Doors) Godrej, Ebco, Hafele make prior approval of Engineer-in-Charge. (N.S.ITEM)

NS Item -Providing and Fixing SS finish door stopper. (For Doors) Godrej/ Ebco/ Hafele make with prior approval of Engineer-in-Charge. (N.S.ITEM)

NS Item -Providing and Fixing SS back stopper. (For Doors) Godrej/ Ebco/ Hafele make with prior approval of Engineer-in-Charge. (N.S.ITEM)

NS Item -Providing and Fixing Pull handle 240 mm. (For Doors) Godrej/ Ebco/ Hafele make with prior approval of Engineer-in-Charge. (N.S.ITEM)

NS Item -Providing and Fixing Ebco SS 304 friction stay-FRS-16. (For Doors) Model of Godrej, Ebco, Hafele make with prior approval of Engineer-in-Charge. (N.S.ITEM)

NS Item -Providing and Fixing Door Closer 60 kg Tto 90 kg (FOR DOORS) of Ebco, Godrez, Hettich make as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing Mortise lock and latch with both side handle and keyed cylinder. (FOR DOORS) 5991 NEH-16, 200mm of Ebco, Godrez, Hettich make as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing Handle 96mm (Zinc). (For Cupboard shutters) Model AZH 96 of Ebco, Godrej, Hettich or make as per prior approval of Engineer-inCharge. .

NS Item -Providing and Fixing Magnet Catcher ultra slim. (For Cupboard shutters). Model MCUS-2L of Ebco, Godrej, Hettich make as per prior approval of Engineerin-Charge

NS Item -Providing and Fixing Tower Bolt Cranked (6`). (For Cupboard shutters). Model LC150 of Ebco, Godrej, Hettich make as per prior approval of Engineer-inCharge.

NS Item -Providing and Fixing ALDROP 16*200mm stainless steal complete in all respect. (For Doors) Ebco, Godrej, Dorset make with prior approval of Engineer-inCharge. (N.S.ITEM)

NS Item -Providing and Fixing Sliding roller with necessary screws etc. complete as per direction of engineer in-charge (used in Aluminium windows) (FOR ALL WINDOWS) Make:(EBCO,Dorma, hafele) Complete in all respect with the prior approval of engineer in charge. (N.S.ITEM)

NS Item -Providing and Fixing Sliding lock 1925(Manul) model no. -P-SWL-IM of Ebco make with necessary screws etc.(FOR ALL WINDOWS). Make: (EBCO,Dorma, hafele) Complete in all respect with the prior approval of engineer-Incharge. (N.S.ITEM)

NS Item -Providing and Fixing Ebco Euro window handle (brown) for Outward Opening Window. (FOR ALL WINDOWS) - Model E-WH1 with HB of Godrej/ Ebco/ Hafele or make as per prior approval of Engineer-in-Charge. (N.S.ITEM)

NS Item -Providing and Fixing Ebco Euro window handle wid hook (brown) for Inward Opening Window. (FOR ALL WINDOWS) - Model E-WH1 with HB of Godrej/ Ebco/ Hafele or make as as per prior approval of Engineer-in-Charge.. (N.S.ITEM)

NS Item -Providing and fixing solid laminated flush door shutters having uniform thickness of 37mm with smooth finish and moisture content 10 to 12% with water absorption of 2%, climate stable, warp and bend free as certified by IS-2202 with 1mm HPL conforming to IS - 2046 including , screws chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position).(FOR ROOMS and TOILETS) (Greenlam, century make, duro)(N.S ITEM).

NS Item -Providing and laying smooth stone texture paint in colors shade and texture as per approval applied by a coat applied by a spray gun in the desired shade of approved make including sand papering the existing surface of putty, to give it a base for applying primer coat. It also includes scaffolding charges complete in all respect (FOR EXTERIOR WALL PAINITNG) of Heritage Paint, Spectrum, Ultratech make with prior approval of Engineer-in-Charge. (N.S ITEM).

NS Item -Providing and laying smooth stone texture paint in colors shade and texture as per approval applied by a coat applied by a spray gun in the desired shade of approved make including sand papering the existing surface of putty, to give it a base for applying primer coat. It also includes scaffolding charges complete in all respect (FOR EXTERIOR FACADE) (N.S.ITEM). of Heritage Paints or Equivalent make as per prior approval of Engineer-in-Charge.

NS Item -Extra for Proving V Groove and L groove in granite cladding including cutting of stone, Polishing to give high gloss finish complete in all respect with the EIC.

NS Item -Providing 15mm thick Engineered Wooden Flooring with plank width of 185mm / 135mm and length of 1800mm / 2100mm and top layer up to 3mm Oak natural Veneer. Surface of Top layer is prefinished with several layer of UV hardened acrylic lacquer. Strictly Free from Formaldehyde and solvents. Flooring plank shall be interlocked using Plank Loc locking system in a glue less floating manner. Engineered wood planks shall be a composition of 3 layer of Pine wood with direction of each layer oriented at right angle to the adjacent layer of natural strain in Lacquer and Non-Beveled /Beveled in length and width (FOR FOR EX. EN. OFFICE and OFFICE FLOORING) (N.S.ITEM) of Mikasa, Action tesa, Century Ply make with prior approval of Engineer-in-Charge. (N.S ITEM).

NS Item -Supply and erection of GRC screens in approved designs and sizes and thickness manufactured containing alkali resistant Glass Fiber of make NEG, Japan and fixing by Dry Cladding using SS Cleats, SS Threading rods, Self Tapping Screws etc. Providing and fixing factory manufactured of G.R.C Jali made (Mahesh GRC, Unistone). It also includes scaffolding charges complete in all respect (FOR EXTERIOR FACADE). (N.S.ITEM)

NS Item -Design, Fabrication, Supply, Installation, Testing and Commissioning of Electric Traction Type fully automatic gearless and suitable for Machine room, Passenger Elevator having SS Enclosure with AC Variable Voltage and Variable Frequency drive unit suitable for operation on 415V plus /- 10% , 3 Phase, 50 Hz. AC supply, power operated SS center bi-parting opening type car and landing doors (Landing Doors with minimum 2hours Fire rating), electro-magnetic brake system, car operating panel with braille push buttons, overload warning indicator, battery operated alarm bell, emergency light, intercom and SS Handrail to meet the requirement as per standard for physically challanged , infrared ray sensing door protection for full height, reverse phase relay on controller, fire man`s switch at ground floor, digital car positions indicator in car and at all floors with up / down direction indications, light fixtures, ventilation fan, Rear wall in 12mm Thk. Toughened Clear Glass Panel, landing sill, main beam in shaft for machine, pit ladder, complete with all accessories serving different floors in the lift shaft alongwith Integrated controller in door frame, Predictive maintenance Enabled complete complying with relevant IS codes and requirement of local authorities, getting approval of concerned state/ central government authorities including 12 months guarantee with free maintenance and replacements of equipment and spares. Automatic rescue device complete with dry maintenance free Ni-Cd batteries with charging circuit as required. Automatic rescue device complete with dry maintenance free Ni-Cd batteries with charging circuit as required. Elevator control and Interfacing with building fire alarm System Voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or stops at a floor served by the elevator.Passenger Lift L1 and L2 i) No of persons - 10 Pax ii) Capacity- 680 Kg iii) Stops and Openings ( Same side)- 8 Nos.) Aproximate Travel- 25 meters Travel Speed- 1.5 mpsCar and Hoistway Entrnce -800x2100 Height of Car- 2239Type of Operation- Group Supervisory Control Layout- Both lifts adjacent to Each Other PASSENGER ELEVATOR AS DESCRIBED ABOVE of SCHINDLER / KONE / OTIS make as per prior approval of Engineer-in-Charge.

NS Item -Supply, unloading, installation, testing and commissioning of the following cubical type panels made of 2.0 CRCA structure, base channe lSMC, doors and sheet metal partitions complete with, Moulded Case Circuit Breakers, meters, indicating lamps, current transformer, control MCB etc. Complete in all respects, insulated bus bars with heat shrinkable PVC sleeve, supported on FRP / SMC supports in suitable bus chambers, interconnection, small wiring, name plate, danger plate, earth bus etc. and comprising of compartments with hinged door for each feeder and its accessories, cable alley with hinged doors, bus chamber with bolted door etc. The panel being of dust and vermin proof construction with rubber gasket, attractively powder coated with Approved Paint shade. The panel shall be free standing type/ wall mounted type as per relavant drawing and comprising with foundation and Masonary works including ducting.Note:- MCCB`s upto 250A shall be with Adjustable thermal-magnetic release with O/C and S/C protection of 25kA and above 250A Microprocessor based adjustable release with O/C , S/C and E/F protection of 36kA. All MCCB`s shall be provided with front door operating handle, Phase Spreaders and Phase Barriers. TPN MCCB Shall mean 3 Pole MCCB with Adequate size of heavy duty separate neutral link. Metering CTs burden shall be 15VA and accuracy class 1.0. CTs shall be `Cast Resin` type . All indication lights shall be LED type. All meters shall be `DIGITAL` type. Degree of Protection for Indoor panels shall be IP-54. (N.S ITEM) (N.S ITEM) Degree of Protection for Outdoor panels shall be IP-55 with canopy and double door. Outdoor panel cable entry shall be from bottom only. Panel space heaters with control MCB and Thermostat, covered CFL lamp controlled by door switch for each panel bay. Gland plates shall be 2mm thick for LT. Panels upto 400A Incomer and 3 mm thick for LT. Panel with 630A and above incomer. Panel Manufacturer should have Type Test Certificates for Short Time withstand current test of 50KA for 1.0 Sec from CPRI Bhopal / Bangalore. `ON` and `OFF` Indicating lamp with control mcb shall be provided for all MCCB out going feeders unless otherwise specified. Control SP MCB`s of 2 /4A Rating shall be provided for each metering circuit. MDB-1 (Approx. Dimension 3000mm (W) x 1000mm (D) x 2400mm (H)) (MAIN PANEL BOYS HOSTEL) Outgoing 1 Nos. 250Amp TP MCCB with microprocessor based release trip with O/C, S/C protection and heavy duty isolable neutral link. 2 Nos ON/OFF indication lamp 6 Nos. 160Amp TP MCCB with thermal magnetic based release trip with O/C, S/C protection and heavy duty isolable neutral link. 12 Nos ON/OFF indication lamp 2 Nos. 125 Amp TP MCCB with thermal magnetic based release trip with O/C, S/C protection and heavy duty isolable neutral link. 4 Nos ON/OFF indication lamp 2 Nos. 100 Amp TP MCCB with thermal magnetic based release trip with O/C, S/C protection and heavy duty isolable neutral link. 4 Nos ON/OFF indication lamp Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc. UPS INPUT and OUT PUT PANEL. (N.S. ITEM) Placed at electrical room Make: Innovic / Zeniya / Advance with the prior approval of EIC.

NS Item -SDB 1, 3 and 4(LIGHT AND POWER) Incoming 1 Set of 160 Amps. 415 Volts, FP MCCB with Thermal magnetic based O/C, S/C and E/F earth fault protection release. Bus bars 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Alluminium bus-bars with colour coded PVC heat shrinkable sleeves Metering and Indication One set of R/Y/B phase indication Lamp and MCB. Outgoing feeders 9 No. 63 Amps FP MCB, `C` of 10kA 9 No. 40 Amps FP MCB `C` of 10kA Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc. (N.S. ITEM) Placed at electrical shaft

NS Item -SDB 2(LIGHT AND POWER) Incoming 1 Set of 250 Amps. 415 Volts, FP MCCB with Microprocessor based O/C, S/C and E/F earth fault protection release. Bus bars 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Alluminium bus-bars with colour coded PVC heat shrinkable sleeves Metering and Indication One set of R/Y/B phase indication Lamp and MCB. Outgoing feeders 1 Nos. 160Amp TP MCCB with thermal magnetic based release trip with O/C, S/C protection and heavy duty isolable neutral link. 9 No. 63 Amps FP MCB, `C` of 10kA 9 No. 40 Amps FP MCB `C` of 10kA 1.No. 63 Amps DP MCB `C` of 10kA Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc. (N.S. ITEM) Placed at electrical shaft

NS Item -LIFT PANEL (1,2,3,4,5 and 6) Incoming 1 No. 160 Amps 4 Pole 415 Volts, FP ATS folowed by 160A FP MCCB of 25kA with thermal magnetic based O/C, S/C protection release. Bus bars 1 Set of 200-Amps, 3-Phase, 4-wire, 415 volts, 50 Hz Aluminium bus-bars with colour coded PVC heat shrinkable sleeves. Both incomers are electrically and mechanically interlocked Metering and Indication One set of R/Y/B phase indication Lamp and MCB. 1 No. Multi Function Meters (A/V/kW/kWh) ON/OFF/TRIP indication lamp for incomer Outgoing 8 No. 63 Amps TP MCCB with thermal magnetic based O/C, S/C protection release and heavy duty isolable neutral link. 8 Nos. 32 Amps. DP MCB Panel as mentioned above should be complete in all respect with internal wiring, al. bus bar etc. (N.S ITEM) Placed at terrace floor

NS Item -Supply ,recieving, storing, handling, double handling, trasnport to exact location, hoisting to required level, ,assembling, erecting, testing and commissioning luminaires basic channel, holder, LED driver (as per mentioned in item), starter, condenser, control gear box complete with decorative attachments, lamps etc.as per specifications and as per catalogue number giving below. (N.S ITEM) Supply of 40W LED batten luminaires with housing made of Aluminum Extrusion for thermal management with an anodized finish. Luminaire should be suitable for Wall/Ceiling mounting with SS clamps. Luminaire shall deliver excellent illumination and visual comfort with CRI of )80, High transmittance Opal Polycarbonate diffuser for glare-free symmetric light distribution. Luminaires should be with min 100 lm/W System Efficacy and designed for Avg. LED Life (L70 B50) 50,000 Burning Hours and with high efficient Photobiologically safe LEDs. Luminaire should be Powered by an integral electronic constant current driver offering THDi(10% , compliance, Output Short-circuit protection, Surge Voltage protection, and other reliability tests as per IS:15885 Part 2/Sec 13. Luminaires should be provided with 2.5kV surge protection. Luminaires manufacturer to have an in-house NABL-accredited Laboratory for testing Photometric parameters. (N.S ITEM) Used in parking, electrical room, Dining hall area and rooms Make: Wipro / Philips / Havells / Halonix with the prior approval of EIC.

NS Item -Supply, Installation, Testing and Commissioning of 12W Recess DownLight Luminaire with housing made up of Aluminium Alloy for efficient heat dissipation and diffuser made up of High quality polycarbonate diffuser to enhance the aesthic of the fixture and to provide glare free uniform light distribution, Powered by an independent, isolated, output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge Voltage protection and other safety test as per IS:15885 Part 2/Sec 13. Power Consumption not greater than 12W and System Efficacy not less than 100 Lumens/Watt, CCT 5700K PF)0.95, CRI)80 ,THD(=10%. LED Average life L70B50: 50000 hours.Operating temperature: -10 °C to plus 35 °C , Operating voltage range: 140 V - 270 V,. Luminaire Should conform to IP20 Classification. Test report to be submitted: photo biological safety norms: IS15885, test certificate to be submitted: certification: LM 79 for luminaire and LM80 for led source, Driver and Fixture to be BIS certified. (N.S ITEM) Used in Toilet areas at each floor Make: Wipro / Philips / Havells / Halonix with the prior approval of EIC.

NS Item -Supply, Installation, Testing and Commissioning of 15W Surface mounted round DownLight Luminaire with housing made up of Aluminium Alloy for efficient heat dissipation and diffuser made up of High quality Transparent diffuser with reflectore to enhance the aesthic of the fixture, LED should be SMD Type, Powered by an independent, isolated, output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge Voltage protection and other safety test as per IS:15885 Part 2/Sec 13. Power Consumption not greater than 15W and System Efficacy not less than 100 Lumens/Watt, CCT 4000K- 5700K PF)0.95, CRI)80 ,THD(=10%. LED Average life L70B50: 50000 hours.Operating temperature: -10 °C to plus 35 °C , Operating voltage range: 140 V - 270 V,. Luminaire Should conform to IP20 Classification. Test report to be submitted: photo biological safety norms: IS15885, test certificate to be submitted: certification: LM 79 for luminaire and LM80 for led source, Driver and Fixture to be BIS certified. (N.S ITEM) Used in staircase, corridoors and balcony at each floor. Make: Wipro / Philips / Havells / Halonix with the prior approval of EIC.

NS Item -Supply, Installation, Testing and Commissioning of 6-9W Surface mounted DownLight Luminaire with housing made up of Aluminium Alloy for efficient heat dissipation and diffuser made up of High quality polycarbonate diffuser to enhance the aesthic of the fixture and to provide glare free uniform light distribution, Powered by an independent, isolated, output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge Voltage protection and other safety test as per IS:15885 Part 2/Sec 13. Power Consumption not greater than 18W and System Efficacy not less than 100 Lumens/Watt, CCT 5700K PF)0.95, CRI)80 ,THD(=10%. LED Average life L70B50: 50000 hours.Operating temperature: -10 °C to plus 35 °C , Operating voltage range: 140 V - 270 V,. Luminaire Should conform to IP20 Classification. Test report to be submitted: photo biological safety norms: IS15885, test certificate to be submitted: certification: LM 79 for luminaire and LM80 for led source, Driver and Fixture to be BIS certified. (N.S ITEM) Used in rooms at each floor. Make: Wipro / Philips / Havells / Halonix with the prior approval of EIC.

NS Item -Supply, Installation, Testing and Commissioning of 10W Bulk Head Fixture made with system efficacy not less than 80 lm/w. (N.S ITEM) Used in lifts at each floor and terrace floor Make: Wipro / Philips / Havells / Halonix with the prior approval of EIC.

NS Item -300 mm Sweep Exhaust fan with Louver suitable for operation on 1-Phase. (N.S ITEM) Used in dining hall at ground floor and in toilet areas at each floor.Make:- Havells, Crompton, Almonard with the prior approval of EIC.

NS Item -380 mm Sweep Exhaust fan with Louver suitable for operation on 1-Phase. (N.S ITEM) Used in in toilets common areas at each floor. Make :- Havells, Crompton, Almonard with the prior approval of EIC.

NS Item -Anti suicide Fan rod with spring hiddend in the rod with builtin connector wire etc. (N.S ITEM) Used for each ceiling fan Make: Goldlife or equvailent with the prior approval of EIC.

NS Item -SITC of Microprocessor based Networkable Multi loopdelet analogue addressable expandable upto 8 Loops fire alarm control panel. The control panel is designed with ARM Cortex-M4 32-bit microcontroller with high resolution (480 X 272 pixels) 4.3 inch graphics TFT LCD display or better / Qwerty Key Pad with symbolic representation for power status, The system status and control keys with symbolic representation for easy access. The panel status shall be visualized on LCD/LED in unambiquese color. This panel can operate as a standalone or connect up to Minimum 16 panels in a network for peer to peer networking, Inbuilt USB 2.0 Port for upload and download the panel configuration using the Configuration tool, One dedicated Fault Relay, 10000 events log with RTC, Numaric keypad for menu access. The panel should be equipped with sufficient numbers of loop with 20% spare capacity with each loop shall have a capacity of 250 analog addressable devices in one loop. The panel shall have a built in power supply and operate 110 / 230VAC plus 10% – 15%, 60 / 50 Hz, 450W,The panel shall have its own battery backup of a minium 24 hours in normal run and 5 minitues in the alarm condition.. Optional: for BMS integration thru BACnet/MODBUS converter, Graphical Software,TCP/IP Module, provision for GSM based Auto dialler,Approval UL 864 -10th Edition. 8 Loop Panel (with Network Cards) (N.S ITEM) Placed at entrance lobby ground floor. Make: Notifier / Simplex / Ravel with the prior approval of EIC.

NS Item -SITC of Intelligent Addressable Multi-Sensor (Optical Smoke ) detector with base. The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. (UL and ULC Listed and FM Approved). (N.S.ITEMS) Used in corridoors, common areas and rooms at each floor Complete in all respect Make: Notifier / Simplex / Ravel with the prior approval of EIC.

NS Item -SITC of intelligent addressable type heat detector incorporate an LED, clearly visible from the outside, to provide in-dication of alarm or fault actuation.B24 with mounting base complete as required. Detector shall be capable of detecting rapid rise in temperature and fixed absolute tem-peratures. Detectors shall employ two heat sensing elements with different thermal characteristics to provide a rate of rise dependent response.It should also be able work at 55°CELSIUS and 78 °CELSIUS both temperatures , Detector shall include RFI screening and feed-through connecting components to mini-mise the effect of radiated and conducted electrical interferences Approved by EN54 and VDS/LPCB. (N.S.ITEMS) Used iin kitchen at ground floor Complete in all respect Make: Notifier / Simplex / Ravel with the prior approval of EIC.

NS Item -SITC of analog Addressable Manual Pull Station -Double Action with inbuilt fault isolator and back box and Break Glass Rod, shall be resettable by Align key to avoid unauthenticated restorations, monitoring the field NO/NC devices. Shall have Binary Coding Setting Dip Switch, The MCP shall have operating temperature range from 0°C to 49°C and humidity tolerance range up to 93% RH, Non-Condensing. Complete with termination and testing as per requirement and as per specification. - `UL Listed (N.S.ITEMS) Used in corridoors at each floor Complete in all respect Make: Notifier / Simplex / Ravel with the prior approval of EIC.

NS Item -Supply, installing, testing and commissioning of Fault Isolator Module capable of monitoring short on SLC loop circuit also isolate wire-to-wire short circuits on an loop of type Class - A and automatically restore communications when shorted conditions are corrected. The fault isolator module and its mounting shall be as per technical specification(N.S.ITEMS) Complete in all respect Make: Notifier / Simplex / Ravel with the prior approval of EIC.

NS Item -Supply and fixing of Earth Chamber Inspection Pit made up of poly propylene material. (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and installation earth enchancing mineral compound tested for leaching and TCLP with NABL accredited Lab as per IEC 62561-7 -25 kg (N.S ITEM)Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and installation of UL Listed Maintenance Free Copper bonded Earth rod of 3048mm length having the dia of 14.2 mm with copper coating thickness of 254 microns. The rod has been tested for Dimension, Marking, Tensile Strength, Salt mist, coating thickness, Electrical resistivity test before and after corrosion test as per IEC 62561-2 and UL 467. (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Stainless steel Conductor Holder for fixing the 10 mm dia round conductor on the side wall . (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Rust resistant non corossive 10 mm dia Copper bonded round conductor used for Earth termination inside the concrete and soil. Short circuit current test for copper bonded conductor:Test 6 kA ratings, as per cross sectional area for 1 sec(IS3043/IEEE80) (N.S ITEM) Complete in all respect.Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Stainless Steel Test Joint with ABS enclosure to interconnect between 8 mm Al. round conductor to 10 mm copper bonded round conductor. (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Lightning counter - LCD screen shows the number of lightning strikes, hour and date of lightning events Buttons enable TIME/DATE setting and log viewing. Replaceable battery, working life minimum five years, Complies with IEC/EN 62561-6 (N.S ITEM)Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Stainless Steel clamp for brick wall holder for 8-10 mm dia Aluminium alloy Solid Round Conductors . The minimum distance between the wall to the conductor will be of 85 mm. (N.S ITEM)Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of 8-10mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in down conductor system which will carry the lightning current to earth pit. (N.S ITEM)Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of air termination rod of 0.5 mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered Type). The rod shall be mounted with H stand and fixing accessories . Make:- APS/CAPE or equivalent complete in all respect with to EIC. (N.S ITEM)

NS Item -Supply and Installation of air termination rod of 1.5 mtr length of material AlMgSi of diametre ø 16/10 mm crimped on both the ends(Tappered Type). The rod shall be mounted with H stand and fixing accessories . Test Parameter: Mechanical Load Test for individual aluminium alloy rods - 120 to 280 N/mm² Salt Spray Test-No sign of corrosion Tested as per IEC 62561-1and2 (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and laying of Adhesion Glue/tape for fixing metal roof holder over the metal surface (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Expansion Piece with connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations.Expansion piece should be consider at every 20 mtr length of straight horizontal air termination and connected at both the end with use of straight connector conductor (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Aluminium Straight conductor connector for interconnecting 8mm Aluminium conductor to meets the requirement of IS/IEC 62305. Tested for Electrical , Mechanical and chemical as per IEC 62561. (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Stainless steel Cross Connector for 8 mm dia Aluminium alloy round conductor and 10 mm Copper bonded conductor at cross junction. (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of Stainless Steel Folded clamp/ roof holder for 8-10 mm dia Aluminium alloy Solid Round Conductor for horizontal Air terminal above metal sheet with fixing screws . The distance between each holder should be min of 1 mtr (N.S ITEM) Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supply and Installation of 8mm dia Aluminium alloy Solid Round Conductor of material AlMgSi used in air termination and down conductor system . Cross sectional area of conductor should be 50 mm². Make:- APS/CAPE or equivalent complete in all respect with to EIC.

NS Item -Supplying Supply, Installation, Testing and Commissioning of following size Industrial socket outlet (outdoor type), IP-66, complete in all respects as required. (N.S ITEM) 20 Amp, 1-phase modular Socket with switch (N.S ITEM) Used in toilet areas at each floor Make:- Neptune / Legrand / LK complete in all respect with the prior approval of EIC.

NS Item -Supplying Supply, Installation, Testing and Commissioning of following size Industrial socket outlet (outdoor type), IP-66, complete in all respects as required. (N.S ITEM) 32 Amp,1-phase Industrial Socket with mcb (N.S ITEM) Make:- Neptune / Legrand / LK complete in all respect with the prior approval of EIC.

NS Item -Supplying Supply, Installation, Testing and Commissioning of following size Industrial socket outlet (outdoor type), IP-66, complete in all respects as required. (N.S ITEM) 32 Amp, 3-phase Industrial Socket with mcb (N.S ITEM) Make:- Neptune / Legrand / LK complete in all respect with the prior approval of EIC.

NS Item -Supply and Installation of First aid box as approved by St. John Ambulance Brigade/Indian Red Cross conforming to IS : 2217-1963. (N.S ITEM)

NS Item -Supply and fixing of Earth Chamber Inspection Pit made up of poly propylene material. (N.S ITEM) complete in all respect.

NS Item -Supply and installation earth enchancing mineral compound tested for leaching and TCLP with NABL accredited Lab as per IEC 62561-7 -25 kg (N.S ITEM) complete in all respect.

NS Item -Supply and laying of 50X 6mm GI Strip laid in trench / tray / ground. (N.S ITEM)

NS Item -Supply and laying of 8SWG GI Wire laid in trench / tray / ground. (N.S ITEM)

NS Item -Supply and installation of UL Listed Maintenance Free Copper bonded Earth rod of 3048mm length having the dia of 25 mm with copper coating thickness of 254 microns. The rod has been tested for Dimension, Marking, Tensile Strength, Salt mist, coating thickness, Electrical resistivity test before and after corrosion test as per IEC 62561-2 and UL 467. (N.S ITEM)

NS Item -Supply, erection and laying of arm/ unarm cable on trays with Cable tie, clamp, dressing etc complete in all respect (N.S ITEM) 4 core 10 sq.mm CU. XLPE ARM CABLE (N.S ITEM) Make:- POLYCAB / HAVELLS / RR KABLE Complete in all respect with prior approval of EIC.

NS Item -Supply, erection and laying of arm/ unarm cable on trays with Cable tie, clamp, dressing etc complete in all respect (N.S ITEM) 4 core 6 sq.mm CU. XLPE ARM CABLE (N.S ITEM) Make:- POLYCAB / HAVELLS / RR KABLE Complete in all respect with prior approval of EIC.

NS Item -Supply, erection and laying of arm/ unarm cable on trays with Cable tie, clamp, dressing etc complete in all respect (N.S ITEM) 3 core 10 sq.mm CU. XLPE ARM CABLE (N.S ITEM) Make:- POLYCAB / HAVELLS / RR KABLE Complete in all respect with prior approval of EIC.

NS Item -Supply, erection and laying of arm/ unarm cable on trays with Cable tie, clamp, dressing etc complete in all respect (N.S ITEM) 3 core 6 sq.mm CU. XLPE ARM CABLE (N.S ITEM) Make:- POLYCAB / HAVELLS / RR KABLE Complete in all respect with prior approval of EIC.

NS Item -Supply, erection and laying of 6 core Fiber Optics cables with accessories including terminations etc complete in all respect (N.S ITEM)

NS Item -Supply installation and testing and commissioning of follwing size of Telephone distribution board in a M.S. box with hinged cover/ door complete with krone type tag block with double jumpering facility mounted on a bakelite sheet etc. including terminations of cable as required. (N.S ITEM) 20 Pair Used in ground floor Make:_ KRONE or equivalent complete in all respect with prior approval of EIC.

NS Item -Supply, laying of following sizes GI Raceway of 1.3 mm Thickness complete with all accessories including junction box with 3 mm thick cover plate, neoprene gasket in joints, cutting the floor and jamming the raceway with all necessary hardware (including civil works) as required. (N.S ITEM) 100 x 38 mm (N.S ITEM) Used in ground floor corridoor and LV shaft Make:- MEM/NEM/ADITYA complete in all respect with prior approval of EIC.

NS Item -Supply, installation Testing and commissioning of Patch Panel, Patch Cords, Cable Manager as required for integration as per specification complete as required including all support as required. (N.S.ITEMS)Make:- Molex/ Panduit/ Siemon complete in all respect with prior approval of EIC.

NS Item -Supply installation, testing and commissioning of workstation suitable for CCTV Management software- Intel i7 with minimum 3 GHz processor, 2 GB Graphic card with DP to HDMI converter, 16 GB RAM, 2 TB Hard disk, Windows10 downgradable to Windows 7, Latest Anti virus, DVD Writer, Wireless Keyboard and Wireless Mouse as per the requirement of the successful operation of the surveillance system complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. Make:- DEL/HP or equivalant complete in all respect with prior approval of EIC. (N.S.ITEMS)

NS Item -Supply, installation, testing and commissioning of full HD 32` LED display with all accessories complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S.ITEMS) Make :- Panasonic/LG/SAMSUNG complete in all respect with prior approval of EIC.

NS Item -Supply, installation, testing and commissioning of Layer-2 PoE plus Managed Distribution Switch 12 Gigabit Ports, Rack Mountable, Switch competible Fibre module Uplink- 2port 10G SFP plus , 2 port 1g SFP for LAN base feature set with support to integration with CCTV, with all related hardware complete as required and as per specifications (N.S.ITEMS) Make:- Alcatel/CISCO/HP complete in all respect with prior approval of EIC.

NS Item -Supply , Installation , Testing and commissioning of 32 Channel NVR (Network Video Recorder), for recording upto 32CH @ 1080P with 08 nos. SATA HDDs minimum 10TB storage or more (recording requirement all cameras recording at 2MP, 25fps for 90 days), H.265 / H.264 / MJPEG/ MPEG4 codec decoding, Front Control Pannel with LEDs Indication, 3 nos. USB, iPhone: iPad: Android based Mobile clients, Video Export feature on USB, Search Mode: Time/Date: Alarm: Motion Detection (MD): Exact Search (accurate to a second): Smart Search, Dual HDMI Output, Alarm Input (16 nos.), Alarm Output (6 nos.), eSATA Device, 320Mbps each Incoiming and Outgoing throughput, Operating Temperature –10°C to 55°CCertification : CE including fixing accessories and cable termination with required connectors/Jack, complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S.ITEMS) Make :- DLINK/CISCO/HP complete in all respect with the prior approval of EIC.

NS Item -Supply, Installation, Testing and Commissioning of Special Surveillance 8TB 3.5` SATA HDD internal etc. complete in all respect. (N.S.ITEMS) Make:- SEAGATE/WD/SAMSUNG complete in all respect with the prior approval of EIC.

NS Item -Supply, installation, testing and commissioning with proper connection and termination of following size equipment rack made out of CRCA sheet to house all the control equipment complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S ITEM) 9U Wall Mounted rack (N.S ITEM) Make :- DYNAMIC/ NESSANG or equivalent complete in all respect with the prior approval of EIC. Used at LV shaft at each floor.

NS Item -Supply, installation, testing and commissioning with proper connection and termination of following size equipment rack made out of CRCA sheet to house all the control equipment complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S ITEM) 24U Floor Mounted rack (N.S ITEM) Make :- DYNAMIC/ NESSANG or equivalent complete in all respect with the prior approval of EIC.

NS Item -Supply, installing, testing and commissioning of 2 way communication Fire Fighter`s Handset (N.S ITEM) Placed at ground floor Complete in all respect.

NS Item -Supply, installing, testing and commissioning of 2 way communication Fire Fighter`s Telephone Jack (N.S ITEM) Used in staircase each floor

NS Item -Supplying, installation, testing and commissioning of fire fighter phone Console complete as required and as per specifications.(N.S ITEM)

NS Item -SITC of emergency fire exit sign boards, with both side display provision with suitable hanging arrangment complete in all respect as required. (N.S ITEM) Used for fire exit at each floor

NS Item -Supply, installation, testing and commissioning with proper connection and termination of following size equipment rack made out of CRCA sheet to house all the control equipment complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S ITEM) 32 U Wall Mounted rack (N.S ITEM) Used in ground floor

NS Item -Supply, Installation, Testing and Commissioning of IP Network TDN Low-Light IR 2 Megapixel fixed Dome Camera, lens - 2.8mm/3.6mm/6.0mm , 1/3” CMOS image sensor, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, 3D NR, Privacy Mask, 3 IR LEDs Smart IR with upto 30m IR distance, ONVIF Profile S and Profile G compliant,IP66, IK10, PoE, CSA 60950-22, CE (EN 50130-4 and EN 55022) , FCC Part 15 and RoHS compliant complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S.ITEMS) Used in corridoors each floor.

NS Item -Supply, Installation, Testing and Commissioning of 2MP Bullet fixed camera , 1/3` CMOS image sensor , IR distance: 40 m , 4 mm, 6 mm: 8 mm,RoI, SMART H.264/H.265, flexible coding, applicable to various bandwidth and storage environments , Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking ,ntelligent detection: Intrusion, tripwire , Motion detection, video tampering, no SD card , SD card full, SD card error, network disconnection, IP conflict, illegal access, supports max. 256 GB Micro SD card ,IP67 protection, IK10 protection , Certifications ,CE ,FCC including all accessories complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S.ITEMS) Used in corridoors each floor

NS Item -SITC of analog Addressable Monitor Module for monitoring the field NO/NC devices for input from 3rd party devices, Fire pumps, Flow switch etc. It shall be configurable for supervisory or alarm and should be as supervised for Class B wiring.Shall have Binary Coding Setting Dip Switch,Shall have an Tri color LED indiaction for normal and Active Modes- - Approval: UL Listed (N.S.ITEMS) Used in fire shaft at each floor Make:- Notifier / Simplex / Ravel complete in all respect with the prior approvalof EIC

NS Item -SITC of Relay/Control ouput module for Extract Fan/toilet fresh air/ pressurization fans / solenoid valves/Tenant,Tri color LED indiaction for normal and Active Modes status,The module shall be as per technical specification-.Approval: UL Listed, 10th edition (N.S.ITEMS) Used in corridoor at each floor complete in all respect. Make:- Notifier / Simplex / Ravel complete in all respect with the prior approvalof EIC.

NS Item -Supplying and Fixing in position GI Box for installation of detectors on true Ceiling complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. (N.S.ITEMS) Make:- Honeywell / Orient or equivalent complete in all respect with the prior approvalof EIC.

NS Item -Supplying, laying, testing and commissioning of 1.1KV grade copper conductor armored FIRE SURVIVAL cable with LSZH insulation as per BS 7846:2009 and IEC-60502:2004 Part-1 (Armored), Retain circuit integrity as per BS 6387 C.W.Z (armored), BS-8491:2008, BS 8434-2: 2009 (armored), (Resistance to fire at 950º C for 3 hours), as per specifications in cable trays, clamped including anchor fasteners to wall with suitable clamps, saddles fixing bolts, complete in all respect and as per specifications. (N.S ITEM) 2x2.5 sq.mm Make:- POLYCAB / HAVELL / RR KABLE / BONTON complete in all respect with the prior approval of EIC.

NS Item -Supplying, laying, testing and commissioning of 1.1KV grade copper conductor armored FIRE SURVIVAL cable with LSZH insulation as per BS 7846:2009 and IEC-60502:2004 Part-1 (Armored), Retain circuit integrity as per BS 6387 C.W.Z (armored), BS-8491:2008, BS 8434-2: 2009 (armored), (Resistance to fire at 950º C for 3 hours), as per specifications in cable trays, clamped including anchor fasteners to wall with suitable clamps, saddles fixing bolts, complete in all respect and as per specifications 2x1.5 sq.mm Make:- POLYCAB / HAVELL / RR KABLE / BONTON complete in all respect with the prior approval of EIC.

NS Item -Providing and fixing in position Bib cock with wall flange (model CQT-23047) Complete in all respect. Make:-Jaquar, Cera, Grohe with prior approval of EIC.

NS Item -Providing and fixing Hand shower (Health faucet) with 1.0m long easy flex tube in chrome finish and wall hook (model no. ALD-565) Make:- Jaquar, Hindware, Cera or equivalent with prior approval of Engineerin charge.

NS Item -Providing and fixing in position two way Bib cock for and hand shower (model CON-041KN) of Make:- Jaquar, Hindware, Cera or equivalent with prior approval of Engineerin charge.

NS Item -Providing and fixing in position Angle Valve (model No.CON-059KN) of Make:- Jaquar, Hindware, Cera or approved by Engineer-in-Charge.

NS Item -Providing and fixing in position 15 mm i/d wall mounted sink cock with swinging casted round shape spout (Model No.CON-347KN) of Make:- Jaquar, Hindware, Ceraor equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and fixing in position European Type Floor Mounted Water Closet (white) Suit of size(mm), (model (No . CNS-WHT-755SN plus CNS-WHT-207 of Make:- Jaquar, Hindware, Ceraor equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and fixing in position Indian Type Orissa Pan with L bend and extension Water Closet with smart single flush Wall hung cistern with installation kit but withour drainage pipes (white) (model (No . ECS-WHT-451 LE plus WHE-WHT-183T of Make:- Jaquar, Hindware, Cera or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and fixing under counter Basin (model No. CNS-WHT-705) of Make:- Jaquar, Hindware, Cera or equivalent as per prior approval of Engineer-inCharge., complete in all respect.

NS Item -Providing and fixing floor drain with jali (pp) as per I.S:14735:1999 marked of Make:- Hindware, Supreme, Jindal pipes or equivalent with prior approval of Engineerin charge.

NS Item -Providing and fixing in position Geyser of 25 liters capacity (Model-ELM-WHT-V025) of Make:- Crompton, Hindware, Jaquar or equivalent with prior approval of Engineerin charge.

NS Item -Providing and fixing in position Bottle trap (model no.ALD-769L300x190) with internal partition 32mm size with 300mm and 190mm Long wall connections pipes and wall flange and waste coupling(model no.ALD-705L130) 32mm size full thread with 130mm Height of of Make :- Jaquar, Hindware or kohler make or equivalent with prior approval of Engineerin charge.

NS Item -Providing and fixing Pillar Cock long neck with 450mm long braided Hose (model No. CQT -23021B) of Make:- Jaquar, Hindware, Cera or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and fixing Wall Hung Basin (model No. CNS-WHT-801) with fixing accessories set size (550x410x195mm) of Make:- Jaquar, Hindware, Cera or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. FLOOR TRAP WITH TOP TILE and STAINER(100mm) Make:- Supreme Parkash, Prince Complete in all respect.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc FLOOR TRAP WITH TOP TILE and STAINER(125mm) Make:- Supreme Parkash, Prince Complete in all respect.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc Door Tee Make:- Supreme Parkash, Prince Complete in all respect.

NS Item -Door bend Make:- Supreme Parkash, Prince Complete in all respect with prior approval of EIC.

NS Item -Bend 87.5 Make:- Supreme Parkash, Prince Complete in all respect with prior approval of EIC.

NS Item -Door Cross Tee Make:- Supreme, Ashirwad, Prince Complete in all respect with prior approval of EIC.

NS Item -Coupler Make:- Supreme, Astro, Finolex Complete in all respect with prior approval of EIC.

NS Item -Door cap Make:- Supreme, Astro, Finolex Complete in all respect with prior approval of EIC.

NS Item -Vent cowl with wire mesh Make:- Supreme, Astro, Finolex Complete in all respect with prior approval of EIC.

NS Item -Multi Floor trap with round jali Make:- Supreme, Astro, Finolex Complete in all respect with prior approval of EIC.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 110mm dia including fixing jointing and testing etc. CLEANOUT Make:- Supreme, Astro, Finolex Complete in all respect with prior approval of EIC.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 160mm dia including fixing jointing and testing etc. Door Tee Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 160mm dia including fixing jointing and testing etc. Coupler ( Rib type) Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 160mm dia including fixing jointing and testing etc Vent cowl with wire mesh Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 160mm dia including fixing jointing and testing etc Door Elbow Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing SWR Fittings (supreme make) for type B pipes 160mm dia including fixing jointing and testing etc Clean out Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 150mm Pipe. Roto DWC BEND 90 D- 160mm Make:- Prince,Supreme, Ashirvad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 150mm Pipe. Roto DWC Bend 45 D -160mm Make:- Prince,Supreme, Ashirvad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 150mm Pipe. Roto Equal Tee-160mm Make:- Prince,Supreme, Ashirvad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 150mm Pipe. Roto Cross Tee-160mm Make:- Prince,Supreme, Ashirvad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 180mm Pipe. ROTO DWC BEND 90D- 180mm Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 180mm Pipe. ROTO DWC BEND 45D- 180mm Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and Fixing dwc Fittings for double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 including fixing jointing and testing etc. for 180mm Pipe. ROTO Equal Tee- 180mm Make:- Supreme, Prince, Ashirwad or equivalent as per prior approval of Engineer-in-Charge.

NS Item -Providing and fixing of 1 No. Wall Mounted Grab Bar Right 90° Angle for handicap toilet complete as required. (Make-CERA, Model-WAC-SAP-BAD090CS) (Hindware, Cera,Jaquar) (Used in Handicapped toilet) Complete in all respect With the prior approval of engineer-In-charge

NS Item -Providing and fixing of 1 No.Wall Mounted Grab Bar Vertical swing for handicap toilet complete as required. (Make-CERA, Model-WAC-SAP-BG0800CS) (Hindware, Cera,Jaquar) (Used in Handicapped toilet) complete in all respect With the prior approval of engineer Incharge.

NS Item -Providing and Fixing automatic `NO-Touch ` electric hand-driers complete with all accessories and fittings. (Make: Jaquar Model No. HDR-SAP-M99ACS) (Jaquar, Euronics and Kingston) (Used in Toilets) With the prior approval of enginer incharge)

NS Item -Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-`F` insulation, conforming to IS-325. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. ( 900 lpm at 35 m Head DSR 27.4.1

NS Item -Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 80 mm dia

NS Item -Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100 mm dia

NS Item -Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100 mm dia DSR 27.11.6

NS Item -Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100 mm dia DSR 27.14.5

NS Item -Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 150 mm dia DSR 27.14.7

NS Item -Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS sheet, 1200 mm. in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve, with required accessories, pressure gauge a and painting with synthetic enamel paoint of approved shade as required. (DSR-27.20)

NS Item -Providing and fixing Pressure switch in the MS pipe Line including connection etc. as required. (DSR-27.22)

NS Item -Supplying and fixing single headed internal hydrant valve with instaneous Gun metal couplings of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank gunmetal cap and chain as required. Single headed Gunmetal. DSR-27.10.1

NS Item -Supplying and fixing first -Aid hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with the following as required. 20/30/40m long 20mm (nominal internal) dia water hose thermoplastic (textile reinfirced ) type -2 as per IS 12585. 20mm (nominal internal) dia gun metal globe valve and nozzle. Drum and brakets for fixing the equipments on wall. Connections from riser with 40 mm dia stop valve (gun metal) and M.S. pipe. (DSR-27.17.2 ) 40m 27.17.2

NS Item -Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe with 63mm dia male and female gun metal couplings duly binded with GI wire, rivets etc. confirming to IS 636 (type-A)as required. Gun Metal. DSR-27.16.1

NS Item -Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required Gun Metal. (DSR-27.18.1)

NS Item -Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required 2 way-100 mm dia M.S. Pipe. (DSR-27.19.1)

NS Item -Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR (DSR-2023 CIVIL - 18.48)

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 25 mm dia DSR 27.7.1

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 32 mm dia DSR 27.7.2

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 40 mm dia DSR 27.7.3

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 50 mm dia DSR 27.7.4

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 65 mm dia DSR 27.7.5

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 80 mm dia DSR 27.7.6

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 100 mm dia DSR 27.7.7

NS Item -Providing laying, testing and commissioning of class `C` heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complete as directed by Engineer-in-charge. 150 mm dia DSR 27.7.8

NS Item -Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories. (D Pendent Sprinkler. (DSR-27.21.1)

NS Item -Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories Upright Sprinkler. (DSR-27.21.2)

NS Item -Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories Horizontal side wall sprinkler. (DSR-27.21.3)

NS Item -Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required. 150 mm dia. DSR 27.23.2

NS Item -Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 700mm DSR 27.25.1

NS Item -Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1000mm DSR 27.25.2

NS Item -Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1200mm DSR 27.25.3

NS Item -Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1500mm DSR 27.25.4

NS Item -Providing and fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 ` BSP bottom entry on Pump Delivery Line complete with Ball valve (N.S.ITEM). Make : Forbes Marshall, Excel Instruments, H-Guru Complete in all respect with the prior approval of EIC.

NS Item -Supplying and fixing hose cabinet of size 900mmx600mmx500mm made of 2 mm thick MS sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15mtr. Long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duty painted with post office red externally and white internall with synthetic enamel paint complete in all respects for external hydrant, as directed by enginnerin-charge. (N.S.ITEM). Make: NEWAGE, M-TECH, LIFEGAURD.

NS Item -Providing, installation, testing and commissioning of gun metal ball valves of following sizes as required. Make: NEWAGE/ADVANCE/ZOLOTO. 25 mm dia complete in all respects with the prior approval of EIC.

NS Item -Providing, installation, testing and commissioning of gun metal ball valves of following sizes as required. Make: NEWAGE/ ADVANCE/ZOLOTO. 50 mm dia complete in all respects with the prior approval of EIC.

NS Item -Supplying, fixing, testing and commissioning of 25mm Air release valve in as per IS:14845 ISI Marked (N.S.ITEM) Make: NEWAGE/ ADVANCE/ZOLOTO complete in all respects with the prior approval of EIC.

NS Item -Supply and Fixing of Fire Man`s Axe with heavy Insulated rubber tested up to 20 KV and confirming to IS :926 as required (N.S.ITEM) Make :NEWAGE/ MTECH/LIFEGAURD complete in all respects with the prior approval of EIC.

NS Item -Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to ID:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. (N.S.ITEM) Make: NEWAGE/ M-TECH/LIFEGAURD Capacity 4.5 Kg Complete in all respect with the prior approval of EIC.

NS Item -Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to ID:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. 22.5kg CO2 fire extingusher trolly base

NS Item -Providing and fixing of ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to ID:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge (N.S.ITEM). Make: NEWAGE/ M-TECH/LIFEGAURD Capacity 4.0 Kg Complete in all respect with the prior approval of EIC.

NS Item -Supply, fixing testing and commissioning of electrical motor driven pump, suitable for automatic operation consisting of following Horizontally mounted, centrifugal pump as per IS: 1520 complete for delivery of under mentioned discharged against desired mentioned head so as to ensure a minimum pressure of 30 meter at the highest and fartherst outlet at the specified flow complete with necessary strainers, 100mm dia dial pressure gauge of calibratin 0-15 kg/sq cm including by pass arrangement ofor periodic testing of the working of the pumpset as well as testing of automation , anti vibration pads , for proper completion of work. The pump shal be capable of giving 150% of rated discharge at head not less than 65% of rated head. The pump shall be provided with mechanical seals. The impeller shall be enclosed type and accurately balanced dynamically. The pump casing shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. (Make: Kirloskar/Mather plus Platt) Squirel cage TEFC induction motor as per IS: 325, suitable for 415 V,3 phase IP 55 protection and class ‘F’ insulation vaccume impregnated windings with heat and moisture resisting varnish for the avove pump and flexible coupling with the pump. The motor shall be rate for continuous duty and shall have HP rating necessary to drive the pump at 150% of its rated discharge at 65% of rated head. (iii) Common bed plate of fabricated mild steel channel coupling, coupling guard ets as required. Suitable cement concrete pump foundation and vibration clamping arrangement as required with foundation bolts anti vibration pads washers etc.(iv) Pressure switch for automatic operation of motor including necessary Copper Cabling/ wiring upto control panel. Water Supply pumps. Type of Pump -_ -_ -_ -_ -_ -_ -_ -_ -_ -_ -_ -_ -_ End Suction. Capacity 2280 LPM. HP of Motor. As required but not less than 60 HP

NS Item -Supply, Installation, Testing and Commissioning of 36 watt 2 ft X 2 ft (nominal size) recessed mounted LED Panel Light, in CRCA powder coated metallic housing, having lumen out put minimum 110 lumen/watt, suitable for recessed mounting, Armstrong/grid/POP/GB ceiling complete with Toatl system lumen )3900 lumenTHD (10%, PF )0.95. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. complete with all accessories, electronic driver, diffuser, directly on ceiling/ wall, including connections and earthing etc. as required. Test report to be submitted: photo biological safety norms: IS15885, test certificate to be submitted: certification: LM 79 for luminaire and LM80 for led source, Driver and Fixture to be BIS certified. Make:- Havells, Philips, Cromptom Complete in all respect with the prior approval of EIC.

NS Item -Supply, fixing, testing and commissioning of 90W Led Street Light IP65 Pressure die-cast aluminium housing for effective thermal management. Total system Lumen of 90W LED should be 9900 or above in Cool day Light 5700K Lumen Efficacy)110 Lm/W, Power factor)0.95, THD (10%. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Make:- Havells, Philips, Halonix Complete in all respect with the prior approval of EIC.

NS Item -Supply and installation of UL Listed Maintenance Free Copper bonded Earth rod of 3048mm length having the dia of 25 mm with copper coating thickness of 254 microns. The rod has been tested for Dimension, Marking, Tensile Strength, Salt mist, coating thickness, Electrical resistivity test before and after corrosion test as per IEC 62561-2 and UL 467 Complete in all respect with the prior approval of EIC.

HSR Item 9.17.1 -Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 1. In 75x75 mm deep chase HSR Rate (Rs.) : 112.00 Through Rate

HSR Item 9.18 -Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. HSR Rate (Rs.) : 147.00 Through Rate

HSR Item 4.4.1 -Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 1. All kinds of soil HSR Rate (Rs.) : 11.00 Through Rate

HSR Item 4.12.1 -Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil HSR Rate (Rs.) : 78.00 Through Rate

HSR Item 9.46.3 -Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer`s specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 3. 12.5 mm thick tapered edge gypsum moisture resistant board HSR Rate (Rs.) : 868.00 Through Rate

HSR Item 9.48 -Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. HSR Rate (Rs.) : 1157.00 Through Rate

HSR Item 9.57.2 -Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 2. 110 mm diameter HSR Rate (Rs.) : 200.00 Through Rate

HSR Item 9.57.3 -Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 3. 150 mm diameter HSR Rate (Rs.) : 269.00 Through Rate

HSR Item 9.62.1 -Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 1. 100 mm diameter HSR Rate (Rs.) : 145.00 Through Rate

HSR Item 9.62.2 -Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 2. 150 mm diameter HSR Rate (Rs.) : 162.00 Through Rate

HSR Item 8.26.2.1 -Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 2.1. Granite of any colour and shade Area of slab up to 0.50 sqm HSR Rate (Rs.) : 2750.00 Through Rate

HSR Item 8.27.2 -Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 2. Granite work HSR Rate (Rs.) : 230.00 Through Rate

HSR Item 4.31.1 -Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 1. All kinds of soil HSR Rate (Rs.) : 51.00 Through Rate

HSR Item 4.32 -Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. HSR Rate (Rs.) : 46.00 Through Rate

HSR Item 4.39 -Providing and injection chemical emulsion for PRE-CONSTRUCTIONAL ant termite treatment (excluding the cost of chemical emulsion) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filing junction of wall and floor, along with the external perimetre of building, expansion joints surrounding of pipes and conduit etc, complete (plinth area of the building at ground floor only shall be measured) using Chlorpyriphos/ Lindane emulsifiable concentrate of 20% HSR Rate (Rs.) : 284.00 Through Rate

HSR Item 4.40.5 -Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 5. Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. HSR Rate (Rs.) : 205.00 Through Rate

HSR Item 10.1 -Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling. HSR Rate (Rs.) : 260.00 Through Rate

HSR Item 10.4 -Providing and laying of screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. HSR Rate (Rs.) : 88.00 Through Rate

HSR Item 12.3.3.2.2 -Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 3.2.2. Kiln seasoned and chemically treated Hollock wood 50x20 mm HSR Rate (Rs.) : 102.00 Through Rate

HSR Item 11.4.2 -10 mm thick cement plaster 2. 1:3 (1 cement: 3 fine sand) HSR Rate (Rs.) : 114.00 Through Rate

HSR Item 11.5.4 -12 mm cement plaster of mix : 4. 1:6 (1 cement: 6 fine sand) HSR Rate (Rs.) : 104.00 Through Rate

HSR Item 11.6.2 -15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand) HSR Rate (Rs.) : 127.00 Through Rate

HSR Item 11.15 -6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge. HSR Rate (Rs.) : 152.00 Through Rate

HSR Item 11.16 -Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 kgs. cement used in cement mortar as per directions of Engineer-in-Charge. HSR Rate (Rs.) : 58.00 Through Rate

HSR Item 11.17 -Providing and fixing of chicken wire mesh for avoiding cracks in plaster with necessary nail/screws etc. complete in all respect to the entire satisfaction of engineer-in-charge HSR Rate (Rs.) : 234.00 Through Rate

HSR Item 10.37.1 -Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 1. 25 mm thick HSR Rate (Rs.) : 790.00 Through Rate

HSR Item 10.38 -Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. HSR Rate (Rs.) : 836.00 Through Rate

HSR Item 10.45 -Extra for pre finished nosing to treads of steps of marble stone. HSR Rate (Rs.) : 251.00 Through Rate

HSR Item 10.49.1 -Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 1. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. HSR Rate (Rs.) : 1759.00 Through Rate

HSR Item 10.50.1 -Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. HSR Rate (Rs.) : 2707.00 Through Rate

HSR Item 10.51 -Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc. HSR Rate (Rs.) : 2534.00 Through Rate

HSR Item 13.21.2 -Supply and fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm and Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets and screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification and entire satisfaction of Engineer-in-charge. 2. Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter HSR Rate (Rs.) : 1240.00 Through Rate

HSR Item 10.59 -Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. HSR Rate (Rs.) : 596.00 Through Rate

HSR Item 10.62 -Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR Rate (Rs.) : 570.00 Through Rate

HSR Item 10.63.2 -Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm HSR Rate (Rs.) : 987.00 Through Rate

HSR Item 10.67.2 -Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 2. Size of Tile 600x600 mm HSR Rate (Rs.) : 1004.00 Through Rate

HSR Item 10.70.2 -Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 2. Size of Tile 600x600 mm HSR Rate (Rs.) : 140.00 Through Rate

HSR Item 10.70.3 -Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. 3. Size of Tile 800x800 mm HSR Rate (Rs.) : 113.00 Through Rate

HSR Item 11.47.2 -12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): 2. Sunk Band HSR Rate (Rs.) : 3.00 Through Rate

HSR Item 11.47.3 -12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): 3. Raised Band HSR Rate (Rs.) : 3.00 Through Rate

HSR Item 11.48.2 -18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand): 2. Sunk Band HSR Rate (Rs.) : 4.00 Through Rate

HSR Item 11.48.3 -18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand): 3. Raised Band HSR Rate (Rs.) : 4.00 Through Rate

HSR Item 13.41 -Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). HSR Rate (Rs.) : 396.00 Through Rate

HSR Item 11.59 -Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. HSR Rate (Rs.) : 71.00 Through Rate

HSR Item 11.60 -Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. HSR Rate (Rs.) : 59.00 Through Rate

HSR Item 10.106 -Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 0 0 0 HSR Rate (Rs.) : 966.00 Through Rate

HSR Item 10.107 -Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 0 0 0 HSR Rate (Rs.) : 1605.00 Through Rate

HSR Item 11.75.2 -Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 2. Two coats HSR Rate (Rs.) : 44.00 Through Rate

HSR Item 11.91 -Melamine polishing on wood work (one or more coat). HSR Rate (Rs.) : 55.00 Through Rate

HSR Item 12.30 -Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge HSR Rate (Rs.) : 1443.00 Through Rate

HSR Item 23.3.1.3 -COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 1.3. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group C HSR Rate (Rs.) : 650.00 Through Rate

HSR Item 23.3.3.3 -COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 3.3. Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch Group C HSR Rate (Rs.) : 326.00 Through Rate

HSR Item 23.3.6.1 -COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.1. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR Rate (Rs.) : 88.00 Through Rate

HSR Item 23.3.6.3 -COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) HSR Rate (Rs.) : 144.00 Through Rate

HSR Item 23.3.6.4 -COPPER WIRING IN PVC CONDUIT (SURFACE/RECESS) 6.4. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm) HSR Rate (Rs.) : 172.00 Through Rate

HSR Item 23.4.1.3 -COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 1.3. Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group C HSR Rate (Rs.) : 710.00 Through Rate

HSR Item 23.4.4.3 -COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 4.3. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group C HSR Rate (Rs.) : 935.00 Through Rate

HSR Item 23.4.5.3 -COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS) 5.3. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required Group C HSR Rate (Rs.) : 1292.00 Through Rate

HSR Item 24.1.3 -EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR Rate (Rs.) : 3368.00 Through Rate

HSR Item 24.1.5 -EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR Rate (Rs.) : 801.00 Through Rate

HSR Item 24.1.6 -EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. HSR Rate (Rs.) : 47.00 Through Rate

HSR Item 24.1.8 -EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. HSR Rate (Rs.) : 96.00 Through Rate

HSR Item 24.1.10 -EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. HSR Rate (Rs.) : 730.00 Through Rate

HSR Item 24.1.15 -EARTHING AND LIGHTENING ARRESTOR 15. Erection only of lightning conductor GI. tape including supply of suitable GI. staples of same size. HSR Rate (Rs.) : 29.00 Through Rate

HSR Item 24.1.16 -EARTHING AND LIGHTENING ARRESTOR 16. Supply and erection of 25mm dia 1.5 metre long lightning GI. tube rod tapered into a point at the top with 16cm x 16cm x 3mm thick G.I. base plate and necessary nuts and bolts with washers. HSR Rate (Rs.) : 898.00 Through Rate

HSR Item 24.2.7.1 -LT CABLE 7.1. Supply and erection of suitable compression type brass cable glands for underground Cable :- Up to 6 Sq mm cable 2 to 4 Core HSR Rate (Rs.) : 32.00 Through Rate

HSR Item 24.2.7.2 -LT CABLE 7.2. Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core HSR Rate (Rs.) : 45.00 Through Rate

HSR Item 24.2.7.3 -LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core HSR Rate (Rs.) : 77.00 Through Rate

HSR Item 24.2.7.5 -LT CABLE 7.5. Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core HSR Rate (Rs.) : 133.00 Through Rate

HSR Item 24.2.7.7 -LT CABLE 7.7. Supply and erection of suitable compression type brass cable glands for underground Cable :- 300 sqmm to 400 sqmm Cable 3 to 3½ Core HSR Rate (Rs.) : 227.00 Through Rate

HSR Item 24.2.8.2 -LT CABLE 8.2. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 4 sqmm to 6 sqmm HSR Rate (Rs.) : 4.00 Through Rate

HSR Item 24.2.8.3 -LT CABLE 8.3. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 10 sqmm HSR Rate (Rs.) : 6.00 Through Rate

HSR Item 24.2.8.4 -LT CABLE 8.4. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 16 sqmm HSR Rate (Rs.) : 8.00 Through Rate

HSR Item 24.2.8.5 -LT CABLE 8.5. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 25 sqmm HSR Rate (Rs.) : 10.00 Through Rate

HSR Item 24.2.8.7 -LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm HSR Rate (Rs.) : 15.00 Through Rate

HSR Item 24.2.8.8 -LT CABLE 8.8. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 70 sqmm HSR Rate (Rs.) : 20.00 Through Rate

HSR Item 24.2.8.10 -LT CABLE 8.10. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 120 sqmm HSR Rate (Rs.) : 32.00 Through Rate

HSR Item 24.2.8.11 -LT CABLE 8.11. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 150 sqmm HSR Rate (Rs.) : 40.00 Through Rate

HSR Item 24.2.8.14 -LT CABLE 8.14. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work.300 sqmm HSR Rate (Rs.) : 91.00 Through Rate

HSR Item 23.5.6.2 -COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.2. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 2.50 Sqmm(1.1.80mm) HSR Rate (Rs.) : 78.00 Through Rate

HSR Item 23.5.6.3 -COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.3. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 4 Sqmm(1/2.24mm) HSR Rate (Rs.) : 109.00 Through Rate

HSR Item 23.5.6.5 -COPPER WIRING IN EXISTING PVC/MS CONDUIT PIPE SURFACE/RECESSED FOR ELECTRICAL POINTS 6.5. Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm) HSR Rate (Rs.) : 310.00 Through Rate

HSR Item 12.157.1.3 -Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.3. For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) HSR Rate (Rs.) : 357.00 Through Rate

HSR Item 12.157.2.3 -Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.3. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) HSR Rate (Rs.) : 410.00 Through Rate

HSR Item 12.159.2 -Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) HSR Rate (Rs.) : 922.00 Through Rate

HSR Item 24.4.3 -STREET LIGHT 3. Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections. HSR Rate (Rs.) : 512.00 Through Rate

HSR Item 24.4.8.5 -STREET LIGHT 8.5. Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7 Metre Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm HSR Rate (Rs.) : 15685.00 Through Rate

HSR Item 28.18 -Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservoir, sewage and water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer`s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. HSR Rate (Rs.) : 322.00 Through Rate

HSR Item 28.19 -Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage and water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the manufacturer`s specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212- 3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dry-shake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. HSR Rate (Rs.) : 262.00 Through Rate

HSR Item 28.20.1 -Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage and water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fibre brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 1. For vertical surface two coats @ 0.70 kg per sqm HSR Rate (Rs.) : 398.00 Through Rate

HSR Item 28.20.2 -Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage and water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fibre brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 2. For horizontal surface one coat @1.10 kg per sqm HSR Rate (Rs.) : 311.00 Through Rate

HSR Item 28.23 -Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-inCharge. HSR Rate (Rs.) : 305.00 Through Rate

HSR Item 28.29.2 -Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled and honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystalline mortar shall conform to the EN 1504-3 having compressive strength Class R4 =45 MPa and adhesive bond strength Class R3 =1.5 MPa. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. 2. For patching of tie rod holes, prepared tie rod hole surface and then primed the area with integral crystalline slurry @0.070kg/sqm and while the surface is tacky repair and then filled the tie rod holes with crystalline [email protected] per hole. The crystalline mortar should be tightly rodded into tie rod holes or packed tightly (For 25x25x25 mm tie rod hole, use 0.040kg to fill the hole) HSR Rate (Rs.) : 13.00 Through Rate

HSR Item 28.30 -Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage. HSR Rate (Rs.) : 461.00 Through Rate

HSR Item 22.10.1.2 -Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 1.2. Kitchen sink with drain board 510x1040 mm bowl depth 225 mm HSR Rate (Rs.) : 4322.00 Through Rate

HSR Item 24.5.2.4 -MISCELLANEOUS ITEMS 2.4. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 90/75 mm outer dia/inner dia HSR Rate (Rs.) : 161.00 Through Rate

HSR Item 24.5.2.5 -MISCELLANEOUS ITEMS 2.5. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 120/105 mm outer dia/ inner dia HSR Rate (Rs.) : 241.00 Through Rate

HSR Item 24.5.2.7 -MISCELLANEOUS ITEMS 2.7. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 180/150 mm outer dia/ inner dia HSR Rate (Rs.) : 343.00 Through Rate

HSR Item 23.6.6.1 -MS CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.1. Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS Pipe of 20 mm dia. HSR Rate (Rs.) : 92.00 Through Rate

HSR Item 23.6.6.2 -MS CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS pipe of 25 mm dia. HSR Rate (Rs.) : 106.00 Through Rate

HSR Item 23.7.6.2 -PVC CONDUIT PIPE ONLY (SURFACE OR RECESSED) FOR ELECTRICAL POINTS 6.2. Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 25 mm dia. HSR Rate (Rs.) : 32.00 Through Rate

HSR Item 23.8.4 -FITTING AND ACCESSORIES 4. Supply and erection of 10.5 cm dia M.S.Fan box including 8 mm dia 30 cm long M.S. Road made into suitable suspension hook and erected in R.C.C. slab for the erection of fan complete with all labour and material required to complete the job. HSR Rate (Rs.) : 95.00 Through Rate

HSR Item 23.8.10.1 -FITTING AND ACCESSORIES 10.1. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 1 & 2 Modules including combined plate for Telephone and data HSR Rate (Rs.) : 93.00 Through Rate

HSR Item 23.8.10.2 -FITTING AND ACCESSORIES 10.2. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 3 Modules HSR Rate (Rs.) : 127.00 Through Rate

HSR Item 23.8.10.4 -FITTING AND ACCESSORIES 10.4. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 6 Modules HSR Rate (Rs.) : 186.00 Through Rate

HSR Item 23.8.10.5 -FITTING AND ACCESSORIES 10.5. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 8 Modules HSR Rate (Rs.) : 233.00 Through Rate

HSR Item 23.8.10.6 -FITTING AND ACCESSORIES 10.6. Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. 12 Modules HSR Rate (Rs.) : 282.00 Through Rate

HSR Item 23.8.11.4 -FITTING AND ACCESSORIES 11.4. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 5 amp Socket HSR Rate (Rs.) : 82.00 Through Rate

HSR Item 23.8.11.5 -FITTING AND ACCESSORIES 11.5. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. 15 amp 6 pin Socket HSR Rate (Rs.) : 124.00 Through Rate

HSR Item 23.8.11.7 -FITTING AND ACCESSORIES 11.7. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. step type Fan Regulator 2 modules 300 watt HSR Rate (Rs.) : 257.00 Through Rate

HSR Item 23.8.11.8 -FITTING AND ACCESSORIES 11.8. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. Telephone Socket outlet modular type HSR Rate (Rs.) : 75.00 Through Rate

HSR Item 23.8.11.11 -FITTING AND ACCESSORIES 11.11. Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable Modular type HSR Rate (Rs.) : 304.00 Through Rate

HSR Item 28.50 -Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) ) 78, solar reflection ) 0.70 and initial emittance ) 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. HSR Rate (Rs.) : 981.00 Through Rate

HSR Item 29.5 -Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevant Item).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. HSR Rate (Rs.) : 1425.00 Through Rate

HSR Item 29.6 -Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis and design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminium sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation and drainage and protection against fire hazard including: (b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. (e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, TandP, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shopdrawings and as directed by the Engineer- in-Charge. HSR Rate (Rs.) : 1405.00 Through Rate

HSR Item 25.3.8 -Supplying, fixing, testing and commissioning of Butterfly valves PN 16 rated without insulation for water circulation as per specifications. 8. 65mm dia. HSR Rate (Rs.) : 1822.00 Through Rate

HSR Item 22.25.3 -Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 3. Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern HSR Rate (Rs.) : 4471.00 Through Rate

HSR Item 22.25.4 -Providing and fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 4. Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern HSR Rate (Rs.) : 6113.00 Through Rate

HSR Item 22.38 -Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. HSR Rate (Rs.) : 241.00 Through Rate

HSR Item 22.42.1 -Providing and fixing toilet paper holder : 1. C.P. brass HSR Rate (Rs.) : 389.00 Through Rate

HSR Item 7.21.2 -Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate (Rs.) : 3968.00 Through Rate

HSR Item 7.22.2 -Brick work with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : 2. Cement mortar 1:6 (1 cement : 6 coarse sand) HSR Rate (Rs.) : 4488.00 Through Rate

HSR Item 7.27.2 -Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in foundations and plinth in : 2. cement mortar 1:4 (1 cement : 4 coarse sand) HSR Rate (Rs.) : 458.00 Through Rate

HSR Item 7.28.2 -Half brick masonry with common burnt clay non-modular bricks of class designation 10.5 in superstructure above plinth level up to floor IV level. 2. Cement mortar 1:4 (1 cement :4 coarse sand) HSR Rate (Rs.) : 488.00 Through Rate

HSR Item 7.51 -Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor IV level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-inCharge. (The payment of RCC band and reinforcement shall be made for separately). HSR Rate (Rs.) : 4144.00 Through Rate

HSR Item 22.81.1 -Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 1. 100 mm dia HSR Rate (Rs.) : 207.00 Through Rate

HSR Item 22.81.2 -Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 2. 75 mm dia HSR Rate (Rs.) : 147.00 Through Rate

HSR Item 22.81.3 -Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 3. 50 mm dia HSR Rate (Rs.) : 97.00 Through Rate

HSR Item 22.83 -Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. HSR Rate (Rs.) : 138.00 Through Rate

HSR Item 23.20 -Fixing of LED Tube light/ 2*2 ft square panel fitting directly on wall /ceiling or false ceiling including making connections etc as required HSR Rate (Rs.) : 67.00 Through Rate

HSR Item 23.21 -Fixing of LED Down lighter 7 to 28 Watt on ceiling or in false ceiling , including cutting/making hole in ceiling including making connections etc as required HSR Rate (Rs.) : 48.00 Through Rate

HSR Item 23.22.1.10 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160 amp, 25 KA HSR Rate (Rs.) : 6695.00 Through Rate

HSR Item 23.22.2.1 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 2.1. MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP HSR Rate (Rs.) : 1815.00 Through Rate

HSR Item 23.22.4.2 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.2. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 8 way ( 2 incoming and 6 outgoing) HSR Rate (Rs.) : 1406.00 Through Rate

HSR Item 23.22.4.3 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.3. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. SPN DB Double Door 12 way ( 2 incoming and 10 outgoing) HSR Rate (Rs.) : 1706.00 Through Rate

HSR Item 23.22.4.7 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.7. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 8 way ( 8 incoming 3phase*8 outgoing) HSR Rate (Rs.) : 3958.00 Through Rate

HSR Item 23.22.4.8 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.8. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DB Horizontal type Double Door 12 way ( 8 incoming 3phase*12 outgoing) HSR Rate (Rs.) : 5755.00 Through Rate

HSR Item 23.22.4.9 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.9. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 4 way ( 8 incoming and 3phase*4 outgoing) HSR Rate (Rs.) : 6088.00 Through Rate

HSR Item 23.22.5.1 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole HSR Rate (Rs.) : 145.00 Through Rate

HSR Item 23.22.5.3 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.3. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Double POLE HSR Rate (Rs.) : 426.00 Through Rate

HSR Item 23.22.5.4 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.4. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. Double pole HSR Rate (Rs.) : 677.00 Through Rate

HSR Item 23.22.5.5 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.5. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp MCBs TRIPLE POLE HSR Rate (Rs.) : 682.00 Through Rate

HSR Item 23.22.5.8 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE HSR Rate (Rs.) : 1291.00 Through Rate

HSR Item 23.22.6.1 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.1. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-inCharge of the work. DP RCCB 30ma sensitivity , 25 A HSR Rate (Rs.) : 1478.00 Through Rate

HSR Item 23.22.6.2 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.2. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-inCharge of the work. DP RCCB 30ma sensitivity , 40 A HSR Rate (Rs.) : 1670.00 Through Rate

HSR Item 23.22.6.3 -MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 6.3. Supply and erection double pole/Four pole Residual (RCCB/ELCB) on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-inCharge of the work. DP RCCB 30ma sensitivity , 63 A HSR Rate (Rs.) : 2075.00 Through Rate

HSR Item 22.86.1 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 1. 15 mm nominal outer dia Pipes HSR Rate (Rs.) : 205.00 Through Rate

HSR Item 22.86.2 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 2. 20 mm nominal outer dia Pipes HSR Rate (Rs.) : 264.00 Through Rate

HSR Item 22.86.3 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 3. 25 mm nominal outer dia Pipes HSR Rate (Rs.) : 333.00 Through Rate

HSR Item 22.86.4 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 4. 32 mm nominal outer dia Pipes HSR Rate (Rs.) : 429.00 Through Rate

HSR Item 22.87.3 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 3. 25 mm nominal outer dia Pipes HSR Rate (Rs.) : 201.00 Through Rate

HSR Item 22.87.4 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 4. 32 mm nominal outer dia Pipes HSR Rate (Rs.) : 272.00 Through Rate

HSR Item 22.87.5 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 5. 40 mm nominal outer dia Pipes HSR Rate (Rs.) : 373.00 Through Rate

HSR Item 22.87.6 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 6. 50 mm nominal outer dia Pipes HSR Rate (Rs.) : 592.00 Through Rate

HSR Item 22.87.7 -Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer in Charge. External work 7. 62.50 mm nominal inner dia Pipes HSR Rate (Rs.) : 1229.00 Through Rate

HSR Item 23.23.1.2 -MISCELLANEOUS 1.2. Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 20 mm dia HSR Rate (Rs.) : 42.00 Through Rate

HSR Item 23.23.1.3 -MISCELLANEOUS 1.3. Supply and fixing Galvanised Iron flexible pipe complete with socket nipples and check nuts etc. at both ends (Up to length of one metre):- Size 25 mm dia HSR Rate (Rs.) : 59.00 Through Rate

HSR Item 23.23.6.1 -MISCELLANEOUS 6.1. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm HSR Rate (Rs.) : 231.00 Through Rate

HSR Item 23.23.6..2 -MISCELLANEOUS 6..2. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 200 X 50 X 2 mm HSR Rate (Rs.) : 351.00 Through Rate

HSR Item 23.23.6.3 -MISCELLANEOUS 6.3. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 375 X 50 X 2 mm HSR Rate (Rs.) : 397.00 Through Rate

HSR Item 23.23.6.4 -MISCELLANEOUS 6.4. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 600 X 50 X 2 mm HSR Rate (Rs.) : 474.00 Through Rate

HSR Item 23.23.8.1 -MISCELLANEOUS 8.1. Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work. 2 pair telephone wire HSR Rate (Rs.) : 7.00 Through Rate

HSR Item 23.23.9 -MISCELLANEOUS 9. Supplying and drawing of 1 no UTP 4 pair CAT 6 LAN Cable in the existing surface/recess MS/PVC conduit as required HSR Rate (Rs.) : 31.00 Through Rate

HSR Item 23.26.3 -SAFETY ITEMS 3. Supply and erection of shock restoration chart in glass frame. HSR Rate (Rs.) : 262.00 Through Rate

HSR Item 22.88.3 -Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 3. 25 mm dia nominal bore HSR Rate (Rs.) : 284.00 Through Rate

HSR Item 22.88.6 -Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 6. 50 mm dia nominal bore HSR Rate (Rs.) : 513.00 Through Rate

HSR Item 22.94.4 -Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 4. 32 mm nominal bore HSR Rate (Rs.) : 258.00 Through Rate

HSR Item 22.94.5 -Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 5. 40 mm nominal bore HSR Rate (Rs.) : 321.00 Through Rate

HSR Item 22.97.1 -Providing and fixing brass stop cock of approved quality : 1. 15 mm nominal bore HSR Rate (Rs.) : 249.00 Through Rate

HSR Item 22.97.2 -Providing and fixing brass stop cock of approved quality : 2. 20 mm nominal bore HSR Rate (Rs.) : 268.00 Through Rate

HSR Item 22.101.1.1 -Providing and fixing Unplasticised PVC connection pipe with brass unions:1.1. 30 cm length 15 mm nominal bore HSR Rate (Rs.) : 44.00 Through Rate

HSR Item 22.103.1 -Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 1. 15 mm nominal bore HSR Rate (Rs.) : 260.00 Through Rate

HSR Item 22.103.2 -Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 2. 20 mm nominal bore HSR Rate (Rs.) : 294.00 Through Rate

HSR Item 22.103.3 -Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 3. 25 mm nominal bore HSR Rate (Rs.) : 292.00 Through Rate

HSR Item 22.109 -Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. HSR Rate (Rs.) : 49.00 Through Rate

HSR Item 30.88.2 -Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 2. For pipes 250 to 300 mm diameter HSR Rate (Rs.) : 283.00 Through Rate

HSR Item 22.166.2.2 -Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 2.2. 150 x 100 mm size P type With sewer bricks conforming to IS : 4885 HSR Rate (Rs.) : 1495.00 Through Rate

HSR Item 22.166.3.2 -Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 3.2. 180x150 mm size P type With Sewer bricks conforming to IS : 4885 HSR Rate (Rs.) : 1600.00 Through Rate

HSR Item 22.181 -Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. HSR Rate (Rs.) : 7.00 Through Rate

HSR Item 22.190.1.2 -Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 1.2. Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Sewer bricks conforming to IS : 4885 HSR Rate (Rs.) : 6597.00 Through Rate

HSR Item 22.190.2.2 -Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 2.2. Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With Sewer bricks conforming to IS : 4885 HSR Rate (Rs.) : 14613.00 Through Rate

HSR Item 21.84.3 -Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 3. Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) HSR Rate (Rs.) : 5438.00 Through Rate

HSR Item 21.85.3 -Extra for every 0.30 metre depth of Inspection chamber 3. 600 mm x 900 mm inside HSR Rate (Rs.) : 1138.00 Through Rate

HSR Item 21.87.1.2 -Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick lime concrete 16:24:100 (as per specified in item No.10.6) in foundations 1st class brick work laid in cement sand mortar 1:5, 40 mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12mm in thickness of 1:2 cement sand plaster and finished with floating coat of neat cement 1 mm thick left absolutely smooth polished and correct to templates including labour for fixing the C.I. road gully grating and frame including painting with coal tar (as Specified in item No. Item 21.48) complete to the requirement of the Engineer in-charge 1.2. Single road gully chamber - Size.-610 mmx457 mmx1105mm HSR Rate (Rs.) : 4085.00 Through Rate

HSR Item 22.191.1.2 -Extra for depth for manholes : 1.2. Size 90x80 cm With Sewer bricks conforming to IS : 4885 HSR Rate (Rs.) : 4130.00 Through Rate

HSR Item 22.191.2.2 -Extra for depth for manholes : 2.2. Size 120x90 cm With Sewer bricks conforming to IS : 4885 HSR Rate (Rs.) : 4941.00 Through Rate

HSR Item 21.98.1 -`Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE `Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment.` 1. 200 mm Outside Dia HSR Rate (Rs.) : 2249.00 Through Rate

HSR Item 21.98.2 -`Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE `Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment.` 2. 225 mm Outside Dia HSR Rate (Rs.) : 2823.00 Through Rate

HSR Item 21.98.3 -`Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE `Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment.` 3. 250 mm Outside Dia. HSR Rate (Rs.) : 3476.00 Through Rate

HSR Item 21.98.4 -`Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE `Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment.` 4. 280 mm Outside Dia HSR Rate (Rs.) : 4334.00 Through Rate

HSR Item 21.98.5 -`Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN- 8 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE `Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment.` 5. 315 mm Outside Dia HSR Rate (Rs.) : 5471.00 Through Rate

HSR Item 22.209 -Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. HSR Rate (Rs.) : 813.00 Through Rate

HSR Item 22.210.4 -Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 4. Rectangular shape 1500x450 mm HSR Rate (Rs.) : 1275.00 Through Rate

HSR Item 22.211 -Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. HSR Rate (Rs.) : 523.00 Through Rate

HSR Item 22.222.2.1 -Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.1. Single Socket Type B 160mm o/d SWR UPVC pipe lines laid complete HSR Rate (Rs.) : 534.00 Through Rate

HSR Item 22.222.2.2 -Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.2. Single Socket Type B 110mm o/d SWR UPVC pipe lines laid complete HSR Rate (Rs.) : 322.00 Through Rate

HSR Item 22.222.2.3 -Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.3. Single Socket Type B 90mm o/d SWR UPVC pipe lines laid complete HSR Rate (Rs.) : 273.00 Through Rate

HSR Item 22.222.2.4 -Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 2.4. Single Socket Type B 75mm o/d SWR UPVC pipe lines laid complete HSR Rate (Rs.) : 242.00 Through Rate

HSR Item 6.1.2 -Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) HSR Rate (Rs.) : 3476.00 Through Rate

HSR Item 6.1.6 -Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 6. 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) HSR Rate (Rs.) : 2442.00 Through Rate

HSR Item 6.9.1 -Providing and laying damp-proof course with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) 1. 50 mm thick HSR Rate (Rs.) : 202.00 Through Rate

HSR Item 6.10 -Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. HSR Rate (Rs.) : 90.00 Through Rate

HSR Item 6.13 -Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth. HSR Rate (Rs.) : 306.00 Through Rate

HSR Item 6.15.1 -Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor four level, excluding cost of centering, shuttering, finishing and reinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) HSR Rate (Rs.) : 5969.00 Through Rate

HSR Item 6.25.1 -Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. 1. All works up to plinth level HSR Rate (Rs.) : 4464.00 Through Rate

HSR Item 6.25.2 -Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. 2. All works above plinth level up to floor IV level HSR Rate (Rs.) : 4502.00 Through Rate

HSR Item 6.26.1 -Extra for providing richer mixes up to plinth and at all floor levels. 1. Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) HSR Rate (Rs.) : 59.00 Through Rate

HSR Item 6.27 -Extra for R.C.C./ B.M.C/ R.M.C. work above floor IV level for each three floors or part thereof. HSR Rate (Rs.) : 244.00 Through Rate

HSR Item 6.30.1 -Centering and shuttering including strutting, propping etc. and removal of form for 1. Foundations, footings, bases of columns, etc. for mass concrete HSR Rate (Rs.) : 156.00 Through Rate

HSR Item 6.30.2 -Centering and shuttering including strutting, propping etc. and removal of form for 2. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. HSR Rate (Rs.) : 282.00 Through Rate

HSR Item 6.30.3 -Centering and shuttering including strutting, propping etc. and removal of form for 3. Suspended floors, roofs, landings, balconies and access platform HSR Rate (Rs.) : 208.00 Through Rate

HSR Item 6.30.5 -Centering and shuttering including strutting, propping etc. and removal of form for 5. Lintels, beams, plinth beams, girders, bressumers and cantilevers HSR Rate (Rs.) : 296.00 Through Rate

HSR Item 6.30.6 -Centering and shuttering including strutting, propping etc. and removal of form for 6. Columns, Pillars, Piers, Abutments, Posts and Struts HSR Rate (Rs.) : 262.00 Through Rate

HSR Item 6.59.3.2 -Providing and fixing sheet covering over expansion joints with iron screws as per design. 3.2. Cement bonded wood particle board 6mm thick as per IS : 14276 200 mm wide HSR Rate (Rs.) : 104.00 Through Rate

HSR Item 6.60.1 -Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints. 1. 200 mm wide. HSR Rate (Rs.) : 555.00 Through Rate

HSR Item 6.61.2 -Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminium base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to it`s components. System shall consist of metal profiles with a universal aluminium base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in-Charge. (Material shall confirm to ASTM 6063). 2. Floor Joint of 150 mm gap HSR Rate (Rs.) : 5559.00 Through Rate

HSR Item 6.62.2 -Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-InCharge. The joints shall be of extruded aluminium base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings and complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminium profiles exhibiting minimal exposed aluminium surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). 2. Wall Joint of 150 mm gap HSR Rate (Rs.) : 4168.00 Through Rate

HSR Item 6.63.2 -Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminium base members with, self aligning and self centering arrangement support plates as per ASTM B221- 02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminium base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063). 2. Roof Joint of 150 mm gap HSR Rate (Rs.) : 4631.00 Through Rate

HSR Item 20.11.1 -Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge 1. 80 mm i/d HSR Rate (Rs.) : 2532.00 Through Rate

HSR Item 20.11.2 -Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge 2. 100 mm i/d HSR Rate (Rs.) : 3426.00 Through Rate

HSR Item 20.26.1 -Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 1. 11.43 cm thick wall HSR Rate (Rs.) : 164.00 Through Rate

HSR Item 20.26.2 -Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. 2. 22.86 cm thick wall HSR Rate (Rs.) : 242.00 Through Rate

HSR Item 20.36 -Making connection with the existing G.I. branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. HSR Rate (Rs.) : 322.00 Through Rate

HSR Item 20.49.1 -Bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge. Size of the main with which connection is to be made. 1. Up to 200 mm internal diametre HSR Rate (Rs.) : 949.00 Through Rate

HSR Item 20.71.1 -Supply, erection, testing of Ceiling fans IS marked (as per IS code 374) with suitable GI pipe complete in all respects complete as per directions of Engineer-in-charge 1. 48" (1200mm) HSR Rate (Rs.) : 2054.00 Through Rate

HSR Item 20.84 -Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge HSR Rate (Rs.) : 1368.00 Through Rate

HSR Item 24.12.94 -LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING AND ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR CABLE 0.75 METER BELOW GROUND LEVEL COVERED WITHOUT SAND AND BRICKS INCLUDING EXCAVATION AND REFILLING OF TRENCHES 94. 300 Sq mm 3.5 core (Arm.) HSR Rate (Rs.) : 1618.00 Through Rate

HSR Item 24.14.30 -LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 30. 25 Sq mm 3.5 core (Arm.) HSR Rate (Rs.) : 214.00 Through Rate

HSR Item 24.14.46 -LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 46. 50 Sq mm 3.5core (Arm.) HSR Rate (Rs.) : 350.00 Through Rate

HSR Item 24.14.70 -LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 70. 120 Sq mm 3.5 core (Arm.) HSR Rate (Rs.) : 694.00 Through Rate

HSR Item 4.16.1.1 -Excavating trenches of required width and depth for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. 1.1. All kind of soil Pipes, cables etc, not exceeding 80 mm dia . HSR Rate (Rs.) : 38.00 Through Rate

HSR Item 4.16.1.2 -Excavating trenches of required width and depth for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. 1.2. All kind of soil Pipes, cables etc, exceeding 80 mm dia but not exceeding 300 mm dia. HSR Rate (Rs.) : 64.00 Through Rate

HSR Item 6.33.6 -Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note: Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more HSR Rate (Rs.) : 66.00 Through Rate

HSR Item 6.34.6 -Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more. HSR Rate (Rs.) : 68.00 Through Rate

Please Enable Macros to View BoQ information