PROVN OF KITCHEN RACK AND ALLIED WORKS AT NIRBHAY VIHAR, PROVN OF CHAIN LINK FENCING AND ADDN/ ALTN TO TOILET BLOCK AT PARADE GROUND OF 11 GRRC UNDER GE (WEST) LUCKNOW

Amount

S & F stainless steel kitchen plate rack made out of not less than 1mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and as directed.

S & F jet spray nozzle with PVC pipe of superior quality complete all as specified and as directed.

S & F health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.20m long flexiblte tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

S & F CP two-way stop/angle valves 15mm bore brass chromium plated, screwed down high pressure with castain head handle screwed both ends for iron pipes or for union complete all as specified and as directed.

S & F in repair for Bib taps 15mm bore, brass chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair for CP stop/angle valves fancy type chromium plated 15mm bore brass, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and as directed.

S & F in repair for CP Pillar taps fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettred "hot or cold" water long screwed both ends for iron pipe complete all as specified and as directed.

Excavation in post hole or smilar hole not exceing 0.50 Cum and removal of surplus soil and well ramming etc complete all as specified and as directed

M&L providing PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed

M&L steel TMT bar 10mm dia, and over in reinforcement, cut to length, bent to shape required, incl. cranking, hooking ends, binding with and including mild steel (annealed) binding wire not less than 0.90mm dia or securing with clips complete all as specified and as directed

M & L for hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for door , balusters, noising to steps including embedding in concrete and screweing etc wind ties for roof including securing bolt, poost and structs in fencing including drilling holes, notching for wire etc flat iron fillets including necessary drilling, bolting and riverting etc or similar works complete all as specified and as directed

M & L for mild steel work as in bands, straps, clamps , hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles confirming to Fe-290 Gde -E-165 complete all as specified and as directed

M & L for preparing new steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified.and as directed.

Material and Labour for preparation of new or previously untreated steel surface of any description n. exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F chain link MS galvanised with 4mm dia and mesh size 40mm x 40mm complete including line wire of complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing galvanised, 2 strand, steel barbed wire, 2.24­mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire annealed not less than 0.9mm dia, staples or steel pins, etc complete all as specified and directed by Engineer-in-charge. Note : Each line of wire to be measured.

M & L for nut and bolt of size 12mm dia bolt not exceeding 5cm etc complete all as specified and as directed

Removing of surplus soil to a distance 50m from the starting point etc complete all as specified and as directed

S & F framed work such as grills, gratings etc with ends of bars shouldered and /or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and as directed.

Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing coat) and rubbish off the premises complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.

Taking up or down steel tubing & connection 15mm bore complete all as specified and as directed.

Taking up or down steel tubing & connection 20mm bore complete all as specified and as directed.

M & L for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface finishing the surface even and fair complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately.)

M & L for rendering 5mm thick in CM 1:3 on concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and as directed.

M & L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying three coats of whitewash complete all as specified and as directed.

M & L for preparation of old treated surface of wall/roof including facia, cornices etc and applying two coat of weather proof exterior emulsion paint complete all as specified and as directed.

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and as directed.

M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm stone aggregate) as in sub base/levilling course complete all as specified and as directed.

M & L for coloured Non -Skid Ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M & L for (Ist quality) coloured digital glossy wall tiles of size 300 x 600 x 7 to 8mm thick as on vertical surfaces such as skirting/dado etc including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M & L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick rendering in cement mortar 1.3 complete all as specified and as directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S & F steel chromium plated urinal spreader suitable for half stall urinal complete all as specified and as directed.

S & F in repair CP stop/angle valves 15mm bore fancy type chromium plated screwed down high pressure with quarter turn handle and wall flange complete all as specified and as directed.

S & F in repair CP two-way stop/angle valves 15mm bore brass chromium plated, screwed down high pressure with castain head handle screwed both ends for iron pipes or for union complete all as specified and directed.

S & F in repair CP bib taps 15mm fancy type Chromium Plated with quarter turn handle and wall flange complete all as specified and directed.

S & F in repair PVC connection pipe 15mm bore 450mm long with PTMT nuts complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n. exc 1000 ltr complete all as specified and directed.

S & F for rotational moulded three layered white coloured polyethylene water storage tank cylindrical vertical with closed top hoisted & fixed in position of capacity 500 litres complete all as specified and directed.

S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

S&F in repair fancy type chromium plated soap dish 100mm size complete all as specified and directed.

S&F in repair stailnless steel grating doom 100mm dia complete all as specified and as directed.

S & F in repair hand shower (health faucet) with 1 m long flexible tube suitable for hot and cold water supply including wall hook, bracket etc complete set of superior quality complete all as specified and directed.

S & F in repair toilet seat floor mounted pedestal pattern with sheet cover white and inbuilt flush including pan and trap, including connection to drain fixing completely in floor and to flushing pipe, anti -syphonage pipe etc complete all as specified and directed.

S & F in repair chromium plated fancy type pillar tap, swan neck with angular cock 15mm bore complete all as specified and directed.

S & F in repair Vitreous china urinal half stall type of size 355 x 345 x 535mm complete including provision and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal in back of cement including connecting to flushing pipe and outgoing pipe complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair CP brass (tubular towel rail) 20 mm dia D type aluminium anodised, 60 cm long between flange complete all as specified and directed.

S & F in repair glass corner self fancy type 250 x 250 and 5.5 mm thick fixed it with brass bracket and screwed complete all as specified and directed.

S&F factory made PVC door frame of section 100 x 45 mm using 5 mm thick prelaminated heat moulded extruded PVC sheet of density 600 kg/Cum and core of section/frame dame solid using MS hollow rectangular tube of size 400mm x 20mm of guage 19 and PVC sheet of density 600 kg/cum. Grame fixed in position using 06 nos 8 mm dia and 100 mm long dash through bolts (anchor fastener) complete all as specified and directed.

S & F 30mm thick factory made PVC panelled door shutter consisting of Stiles/Rails made out of heat moulded 5mm thick prelaminated PVC sheet of density 600 kg/cum and MS rectangular hollow tube of 40 x 20mm of guage 19 with size of member as given below. Edges/corners of stile/rail chamfered towards panel and panel consisting of 02 Nos panel of 10mm thick (5mm + 5mm) prelaminated PVC sheet of density 600kg/cum complete all as specified and directed. Sizes of members:- (a) Stiles - 110mm x 30mm (b) Bottom /Top Rail - 135mm x 30mm (c) Lock Rail - 145mm x 30mm

M & L for PCC type B-1 (1:2:4) (20mm graded stone aggregate) as in benching and coping complete all as specified and directed.

S & F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts complete all as specified and directed.

S & F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S & F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

S & F Stainless Steel butt hinges 100mm size and fixed complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in plinth protection, top finished even and smooth without using extra cement including making dummy joints 10x30mm size and filling the same with mix of 1 part of bitumen and 3 parts of sand at distance not exc 2.5 m and at every turning point complete all as specified and directed.

S & F in repair looking mirror fancy type decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and directed.

M & L for prepration of old treated surface of wall and applying two coat of white wash complete all as specified and directed.

S & F in repairs WHB vitreous china, white, flat back, size 550x400mm incl brackets, waste coupling and waste pipe complete all as specified and directed.

Dismantling stone slab and tiles of any description or and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed.

M & L for 400x400x12mm thick exterior grade cement concrete tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

S & F anodised aluminium window and ventilator powder coated shutters top hung type without sash, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, 3mm thick glass anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed.

M & L for Precast cement concrete RCC 1:2:4 type B-1 using 20 mm graded stone aggregate set in cement morter 1:4 as in cover slabs for drain / manhole cover complete all as specified and directed.

S & F in repair 100mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S & F in repair 75mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

M & L for 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed.

S & F chromium plated toilet paper holder complete all as specified and directed

M&L for point wiring with PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) ISI marked multi-stranded copper conductor single core including 20mm dia medium grade PVC conduit concealed in wall / false ceiling, concealed terminal boxes not less than 1.6 mm thick of required size with top cover 2.8 mm thick of plastic laminated sheet (Hylum) of required colour complete metal flush terminal boxes with all accessories including 1.5 Sq mm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly including colour coding of cable shall be Phase - Red, Neutral- Black and Earth- Green complete all as specified and directed for:- (a) One light/fan point controlled by one switch

Same as item No 80 but one switch socket outlet point on the same board complete all as specified and directed.

S&F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and directed.

S&F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F MCB DB sheet enclosure single pole and neutral (4+2) way 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way suitable for 4 way double door complete all as specified and directed by Engr-in-charge.

S&F in repair MCB, single pole, 240 Volts (05 to 32) Amps,10Ka complete all as specified and directed by Engr-in-charge.

S&F in repair MCB, single pole & neutral, 240 Volts (16 to 40) Amps,10Ka complete all as specified and directed by Engr-in-charge.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge Makes shall be provided group-I cat as per latest approved make given by HQ CECC

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V , minimum 100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

S&F in repair LED Building security light 20/25 Watt with high power LED source (>100 lumen/watt) PDC housing, IP66 and IK 07 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories , as specified and directed by Engr-in-charge. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall, including making recess on wall of required size and all necessary fixing accessories complete all as specified and as directed.

M&L for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 m below normal GL with the top edge of the plate not less then 1.5 m below the normal GL connected to GI wire 4mm dia protected by 15mm GI pipe (light grade) and watering pipe 20mm bore GI pipe (light grade) and chamber with PCC (1:4:8) type D2 using 40mm graded stone aggregate, coping with (1:3:6) type CI using 20mm graded stone aggregate and with RCC pit cover (50 mm thick) in 1:2:4 type B1 using 20mm stone aggregate, reinforced with 8mm for MS bar at 80mm c/c both way in lieu of CI pit cover with angle iron frame including excavation and earth work and removal of surplus soil of earth complete all as shown in electrical plate No 3 of SSR Part I and including charcoal dust, common salt and earth lead connected to earthing test point testing of earthing complete all as specified and directed by Engr-in-charge .NOTE: Main earthing lead and protection GI pipe from earth electrode to test point up to 7.5 m is to be provided and the cost for the same shall deemed to be included in the above quoted rate.

Rakesh Traders

m/s raghubar dayal

QUALITY CONSTRUCTIONS CO

M/s J C Oberoi