SPL REP TO EM INS AT 9BRD AFS PUNE PROVN OF SHED FOR WCDMA NEAR HQ BLDG AT 9BRD AFS PUNE PROVN OF FLOORING AT POL STORE NEAR LOGISTICS HANGER AT 9BRD AFS PUNE PROVN OF RAIN WATER HARVESTING PIT AT AKASH NAGAR OF 2WING AFS PUNE UNDER GE AF LOH

Amount

Taking down existing stone slabs over roof and water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, scrubbing down with water etc. complete all as specified and directed.

Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and directed.

Roughening surfaces of old concrete floors/slabs by picking, sweeping, cleaning and washing down with water to remove dust, brushing neat cement slurry with 3.0Kg of cement per sqm complete all as specified and directed.

M & L for cutting grooves in brick wall 75 mm wide and 65 mm deep tucking in edges of felt and shaping horizontal face of grooves with CM (1:3) complete all as specified and directed.

M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed.

M & L for providing PCC 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) as in padding concrete for getting proper slope of roof / covering etc as complete all as specified and directed.

M & L for rendering 10 mm thick average in cement mortar (1:4) over roof surfaces mixed with liquid WPC as per manufacturer’s instructions, finished fair without using extra cement complete all as specified and directed. (NOTE: WPC shall be measured and paid separately)

Preparation of surface and applying oil based bitumen primer of approved make to concrete surfaces at the rate of 0.4 kg. per sq. m complete all as per manufacturer instruction specified & directed.

M & L for roof treatment using APP based polymeric membrane, minimum weighing 3.5 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (Net wooven polyster weight >160 gm/Sqm),Softening point of membrane > 150degree C laid on primed surface by forced application with side over lap 100 mm and end lap minimum 150 mm and sealing over lap and joints as per manufacturer's instructions complete all as specified and directed.

M & L for two coats of aluminium paint 0.30 ltr / sqm above the APP membrane of approved make as per manufacturer instructions complete all as specified and directed.

Supply only liquid water proofing compound as per manfacture instruction.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to tore (measured overall as fixed along the centre line over fittings and accessories)

S & F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F for 110 mm PVC (SWR) bends any radius with oval acess door complete all as specified and directed.

S & F for 110 mm PVC (SWR) junction single, (Single T) with oval access door equal or unequal complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S & F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel colour sheet having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as specified and directed.

S & F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based plain colour sheet having tensile strength of 550 Mpa as in roof covering with self tapping screws complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running fixed with angle cleats or other connecting plates of grade Fe 410 W Quality A complete all as specified and directed.

M & L Joist, channel, angle, or tee sections in vertical post fixed independently, without connecting plates, etc. Fe 410-W (Gde E250) quality-A complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations, filling & mass concrete complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

S & F Framed work such as guard bar / grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; conforming to Fe.290.Gde-E-165. complete all as specified and directed .

Disconnecting existing exc 250 nexc 500 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and dirt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Disconnecting existing 1000 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and dirt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Dismantling water tanks of any type of capacity exc 250 but n.exc 500 liters and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

Dismantling water tanks of any type of capacity exc 500 liters but n. exc 1000 ltrs and removing to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I .

S & F of Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F GI pipe medium grade 15 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F GI pipe medium grade 20 mm dia bore galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm bore in new or old position complete all as specified and directed.

Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore in new or old position complete all as specified and directed.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 on brick or concrete surfaces finished even and smooth with using liquid integral water proofing compound as per manufacturing instructions on walls complete all as specified and directed. Note: (WPC Measured and paid seperately)

M&L 10 mm thick Polymer ready mix plaster of approved make , on fair faces of brick work or concrete surfaces surfaces finished even and smooth including necessary scaffolding complete all as specified and directed.

M&L 15 mm thick Polymer ready mix plaster of approved make , on fair faces of brick work or concrete surfaces using water proofing compound as per manufacturing instruction surfaces finished even and smooth including necessary scaffolding complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of primer on wall complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement on ceilings complete all as specified and directed.

M & L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of acrylic oil bound distemper on walls with 3mm wall care putty complete all as specified and directed.

M&L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls plastered or unplastered incl removing cornices, pilasters by brooming down to remove all dust, dirt and all loose scales and other foreign matter and smoke soot, moulds, moss and efflorescent salt, oil & grease spots by steel wire brushes or steel scrapers, etc and applying two coats of white wash to walls to obtain uniform surface including making good the surface complete all as specified and directed.

M&L Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down Chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc. 1.50 Sqm but n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n. exc 1 sqm each. complete all as specified and directed.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

S&F pressed steel door frame of size 125X60mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and directed.

S&F pressed steel door frame of size 105X60mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate ) as in filling back of pressed steel door frames / chowkhats and for fixing hold fasts etc complete all as specified and directed.

M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M & L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

M & L for preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube complete all as specified and directed .

S&F Factory made solid panel PVC door shutter 35mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as directed .

S&F SS butt hinges 100mm fixed to doors and chowkhats all as specified and directed.

Supply only butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness ,size ,quality or description ) from wooden frames or stone ,concrete or brick surrounds ,glazed with putty or fixed with beabs.

S & F for 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for preparation of new or previously untreated surface of Steel and iron of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide,zink crome complete all as specified and directed

M & L for flat iron for hold fast of doors / windows confirming to FE - 290 Gde E-165 complete all as specified and directed.

Cutting holes for inserting hold fasts in Brick walls built in cement mortar and making good disturbed portion in PCC (1: 2 :4) type B1 or in cement mortar (1:3) as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed .

S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S & F in repairs for butt hinges medium weight cold rolled mild steel of 75 mm size. complete all as specified and directed .

S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 300 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair cast iron body door closer hydraulically regulated of cast iron body, designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S & F for Anodised aluminium frame powder coated for doors, windows, ventilators with one or more rebates including joining cleat,rubber gasket, screws and all necessary fittings for fixing etc. complete all as specified and directed.

S & F for Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S & F for Anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hinges etc. complete all as specified and directed.

Supply only Aluminium louvers of 4/6 blade as fixed in aluminium ventilators complete all as specified and directed.

S & F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description all as specified and directed.

M&L for Brickwork with old size fly ash bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete.

Demolition of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortars including backing in floors, aprons etc.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring

M& L hand cut kota stone slab flooring 20mm thick over cement screed base laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including screed bed 15 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and directed.

M& L hand cut kota stone slab flooring 20mm thick as in vertical surface such as skirting and dado jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including backing coat of 10 mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

All as per Item No 93 above but as in skirting/dados over and including 10mm thick rendering in CM 1:4 complete all as directed.

S&F 450x300x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed by Engineer -in- Charge.

S & F PVC valveless, syphonic action type flushing cistern, low level, white,with inlet, ball valve, float and handle 10 ltrs capacity incl brackets in repairs.

S & F vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. PTMT waste coupling and PVC waste pipe 75 cm long and 15mm dia PVC connection etc complete in repair

S&F in repairs Bib tap cast copper alloy fancy type chromium plated long body screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs

S&F in repairs Pillars taps fancy type cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs

S&F in repairs Stop valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed as in repairs

S&F in repair PVC Floor Trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

S&F in repairs angle valve fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed.

S&F in repairs Brass chromium plated shower rose125mm size fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm dia fixed.

S&F in repairs PVC Waste pipe as in WHB/Sink Size 32/40 mm fixed to coupling all as specified and directed.

S & F in repairs SS Grating doom 100mm dia including bedding and pointing in cement mortar 1:3 all as specified and directed.

S & F in repairs SS Grating doom 100mm dia with hole dia including bedding and pointing in cement mortar 1:3 all as specified and directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding and connection to PVC low level flushing cistern 10 Ltr capacity including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.

S&F in Repairs Health facuet ABS body with 1 meter SS braided with connection pipe complete all as specified and directed.

S&F vitreous chinaware EWC including connection to drain or outgoing pipe and to PVC flushing pipe, antisyphonage pipe connection to PVC low level flushing cistern 10 ltr capacity with brackets of approval Make and all necessary fittings etc complete all as directed and specified incl PVC seat cover fixed in repair.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level)

M&L for 100mm thick PCC type B-2 (1:2:4) using 40mm graded agg as in flooring finished even and smooth w/o usin extra cement .

M&L for 100mm thick PCC type C-2 (1:3:6) using 40mm graded agg as in flooring finished even and smooth w/o usin extra cement .

M& L sand cushioning for laying paver block complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block 60 mm thick rubber molded any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment over sand

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Dismantling boarding, and ceiling boards (fire, pulp,insulation ) etc insulation boards/slabs/blankets any thickness including cover/frame any description, fixed in any position with nails complete all as specified and as directed by Engr-in- Charge.

M&L 12mm Perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size suspended false ceiling incl GI powder coated grid work using 25mmx 23.5mmx1.5mm main tee, 25mmx23.5mmx1.28mm crossed Tee & 25mmx23.5mmx1.2mm angle fixed to wall for false ceiling incl necessary supporting hanger with 6mm dia GI wire & wire J bolts washer nuts for securing frame work to ceiling, suspended @ 125 cm C/C bothways, size of grid shall be 605x605mm complete all as manufacture instruction & specified & complete all as specified and as directed by Engr-in- Charge.

Taking down rolling shutter of any size any type complete and removal to store.

S&F 1.25mm th steel rolling shutters, with out ball bearing, as specified including top cover, an anchoring rod, hasp and staple and one shop coat of primer; erected in position as indiindicated, complete: gear operated type with bevel gear box and crank handle

S&F Ball bearing for rolling shutters complete all as per specified and directed

Excavating in post hole or similar hole each n.exc. 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc. 25 cm, watering and removing surplas soil to adistance not exc. 50 mtr and making good surface in soft soil complete all as specified and as directed by Engg-in-Charge.

M&L two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface after necessary preparaton of surface over 10 cm in width or girth complete

M&L for hardcore of gauge n.exc 0.63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of a broken stone or boulders complete all as specified and directed.

M&L for 150 mm thick Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field, floors and hardstanding using 400 kg of cement per cubic metre laid in panels with and including all necessary formwork to divide the area in panels not exc 9 Sqm each and conforming to design and finishing top surface even and smooth after laying and compacted for heavy duty industrial use with using Nitoflor hardtop floor hardener or equivalent @ 7kg/sqm in two layers by using authorised applicator to get desired smooth finish fresh green concrete surface complete all as specified and directed. Note: Floor hardner will be measured and paid seperately.

Supply only floor hardner Nitoflor hardtop of fosroc or equivalent complete all as specified and directed.

Geohydrogical survey for 1 Nos of borewell Drilling , Purpose of Rainwater harvesting , survey conduct by PQWT-TC-300 and Geo Detect made in Germany Detailing of Rock & Soil Structure of this Survey (a) Soft , Rock, Murram type (b)Hard Rock , Basalt Rock Structure . (c) Red Soil Structure (d)Hard rock (e) Black cotton and red soil Mix structure Debth upto 300 Mtr for identify good location of ground water

Bore well Drilling upto 350 feet ( depth depend upon Geophysical survey ) dia upto 6inch etc complete all as specified and directed by Engineer -in-charge

S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of dia 150mm used as casing with desired perforation etc complete all as specified by Engr-in-charge

Excavation over areas in soft loose soil n exc 1.5 m depth and getting out etc complete all as specified and directed

Excavation over areas in soft disintegrated rock n exc 1.5 m depth and getting out etc complete all as specified and directed

Excavation over areas in hard rock exc 1.5 m depth but n exc 3.0m depth and getting out etc complete all as specified and directed

M & L in broken bricks hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage well complete all as specified and directed

M&L Coarse Sand filling under chambers or in foundations etc complete all as specified and directed

S &F Granite trap and basalt Coarse aggregates, grading 3, 50 to 20 mm size etc complete all as specified .

M&L for old size brick work with fly ash bricks in two thick honey comb walling in CM ( 1.4) complete all as specified and directed

M& L Steel work in tubular trusses including special shaped washer etc complete using ERW or including butt welded tubes conforming to I.S-1161-1979 grade St -2240 including rolled mild steel as in joist channel ,angle,or tee ssections fixed independently

M & L for Plates (plain or chequered) channels, square cut or notche (ordinary and counter sunk) forming holes, without any attachment, of Fe-410W (Gde E-250 quality A) with and including necessary cutting bending drilling holes welding, rebates etc, complete all as directed by Engr-in-Charge. etc.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed Diameter of neck in mm 16 to 20 the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

S&F 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

Returning, filling in incl spreading levelling watering and well ramming in layers n.exc 25cm thick complete.

Removing excavated material to a distance n.exc 50m and depositing of where directed at a level n.exc 1.5m above the starting point.

Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge.

M&L cement concrete in foundation, filling and mass concrete type C2 (1:3:6) using 40mm graded coarse aggregtae complete all as specified and directed.

M&L cement concrete in foundation, filling and mass concrete type C1 (1:3:6) using 12.5mm as in bedding or surface channel and drains complete all as specified and directed.

M&L for extra for forming fair finished drains or channel 30cm inner girth in cement concrete using extra including forms mounds mitred complete all as specified and directed.

Add extra for every 2.5 cm or part there of over 30 cm girth of item No. 147 here in before complete all as specified and directed.

Taking down cearfully by unscrewing the unserviceable DB Boxes, MC distribution boards SP & TPN with porcelain cutouts etc all as directed.

Taking down the sub main wiring of any dia / sq mm on teak wood batten / PVC conduit GI earth wire all as directed.

Material and labour for providing point wiring with two runs of 1.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open type Plastic Enclosure( Plastic Switch Board ) ISI Marked for housing switches / sockets all a specified and directed

(a) One light point controlled by one switch .

(b) One Fan point controlled by one regulator/switch.

(d) One 3 pin socket 5 A on independent board.

(e) One 3 pin socket 5 A on the same switch board.

Material and labour for providing point wiring with two runs of 2.5 Sqmm multi stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded FRLSH PVC insulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open type Plastic Enclosure (Plastic Switch Board) ISI marked for housing one 15 A Switch / sockets all a specified and directed

M/L for sub main wiring with two runs of single core 6.0Sq mm FRLSH PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mm single core FRLSH PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping all as directed and specified . ( Note:- Three runs of 6 Sqmm copper cable including PVC casing & caping shall be measured & paid as one length )

Supply and fix switch piano flush type 5 Amp one way. (ISI marked)

Supply and fix Socket out let , 3 pin 5 Amp (ISI marked)

Supply and fix switch socket combination 5 / 16 A, 2 in 1, 5 Pin, flush type.(ISI marked)

S/F Fan Regulator electronic step type 100 W complete as directed (ISI marked)

S&F angle / batten holder insulated body with back plate for batten fittings (ISI marked)

Supply and fix ceiling rose surface type bakelite / PVC three terminal 65 x 50mm. (ISI marked)

Taking down existing serviceable tube light fittings / recessed fitiing any type keep in custody and refixing the same as required on site and directed incl disconnecting and connecting connection for smooth functioning complete .

Taking down old light fitting along with fixture and Supply & fix LED tube light fitting comprising of 20 watt Aluminium T-8 LED tube rod with inbuilt driver and acessories, the tube rod shall have efficacy of 100 Lm/Watt, including providing prewired CRCA box type batten with holders for fixing LED Tube rod along with provision of 02 no PVC square block for fixing of the fitting with necesary screws, including connecting up with three core 0.5 Sqmm flexible copper conductor cable ceiling rose to fitting terminal complete as specified and directed.

Supply & fix LED street light fitting Energy saving and environmental friendly long life LED street light fittings 35 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded ON each LED having IP65 protection and Impact resistance of IK07 with 10KV Built-in Surge Protection Device, Thd<10% including 20/25mm dia bracket 60cm long/ clamp 25x4 mm/ nut bolts etc. The light fittings shall be fixed on bldg complete all as specified.

S&F Vertical double door Distribution board TPN 4 way with nuetral busbar and consisting of MCCB 4pole 100A 10KA - 1 NO complete including connecting LT cable and outgoing submain wiring etc and testing complete all as specified and directed by Engr-In-charge. (Note : Cost of MCCB 100A, 4pole, 10KA -01 Nos is included in quoted rates)

Supply and fix sheet metal enclosure surface mounted MCB DB double door SPN 16 way 230 V with neutral link and connecting to wiring complete all as specified and directed by Engr-In-charge.

Supply and fix sheet metal enclosure surface mounted MCB DB double door SPN 8 way 230 V with neutral link and connecting to wiring complete all as specified and directed by Engr-In-charge.

Supply and fix sheet metal enclosure surface mounted MCB DB double door SPN 4 way 230 V with neutral link andand connecting to wiring complete all as specified and directed by Engr-In-charge.

Supply and fix MCB SPN 240 V, 32 Amps. complete all as directed at site.

Supply and fix MCB SP 240 V ,6 to 32 Amps complete all as directed at site.

M/L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc.

KSP ENTERPRISES (BID ID -3293547)

R k construction (BID ID -3288567)