IMPROVEMENT / RENOVATION / UPGRADATION OF EXISTING MD ACCN (PH-II) TO MAP SPECIFICATION AT AF STN BHISIANA

Amount

Taking down cement or cement lime plaster of any description and any thickness on brick, concrete or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material and labour for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc, complete all as specified and directed.

Material and labour for rendering 15 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc, complete all as specified and directed.

Material and labour for rendering 5 mm thick cement plaster in CM(1:3) on fair faces of concrete surfaces in ceiling, complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement base primer on new plastered surfaces, complete all as specified and directed.

Material and labour for preparation of new plastered/ unplastered surfaces of walls and applying two coats of premium quality exterior emulsion paint over a coat of primer of same make, over walls/ parapets/chajja projections/ facias etc. surfaces, complete all as specified and directed.

Material and labour for Complete removal of existing treatment and preparation of old plastered/ unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement base primer on wall surfaces, complete all as specified and directed.

Material and labour for Complete removal of existing treatment and preparation of old plastered/ unplastered surfaces of walls/parapets/chajja projections etc and applying two coats of premium quality exterior emulsion paint over a coat of primer of same make, complete all as specified and directed.

Material and labour for prepration of new plastered surfaces of Ceiling and applying three coats of white wash on Ceiling ,complete all as specified and directed.

Material and labour for prepration of Old plastered surfaces of Ceiling and applying two coats of white wash on Ceiling ,complete all as specified and directed.

Material and labour for prepration of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Material and labour for prepration of old plastered surfaces of walls and applying two coats of white wash, complete all as specified and directed.

Material and labour for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic/distemper oil emulsion acrylic, white or tinted over a coat of primer of same make, complete all as specified and directed.

Material and labour for Complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of Oil bound distemper acrylic /distemper oil emulsion acrylic , white or tinted over a priming coat of same make on wall surfaces all as specified and directed by Engineer-in-Charge.

Material and labour applying 1.5 to 2.00 mm thick wall care putty (JK/Birla/berger) on walls, including making surface even and smooth using sand paper before applying priming coat, complete all as specified.

Demolition of reinforced cement concrete of any description and in any position , cut as required to facilitate demolition, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (other than ground floor) in beams, staircases, landing chajjas and similar work.

M&L for cement concrete Type-B-1, 1:2:4 ) 20mm graded aggregate as in roofs, floors, beams,lintels, Columns, shelves, staircase, landing, parapets and railings and with similar suspanded works including necessary form work required at site and applying a coat of cement slurry over old surfaces of concrete to make perfect binding, complete all as specified and directed.

All as per srl item no18 above but as in chhajjas .complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per srl iten no 20 above but 6 to 8 mm dia.

S&F chicken wire mesh / hard drawn wire fabric of weight not exc 4mkg per sqm , cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm sia complete all as specified and directed.

Demolition of cement concrete unreinforced of any description in any position not exceeding 150 mm thick (below or above ground level), complete all as specified and directed.

Material and labour for 50 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection finishing cement concrete surface even and smooth without using extra cemENT, including making construction joint at a interval not exceeding 2.00 m and at each corner / tornn and filled with sealing compound with grade A(normal)in 25/30 , complete all as specified and as directed.

Material and labour for roughening old concrete floor of rooms by picking, sweeping clean and washing down to remove dust etc and applying cement slurry @ 3 kg per Sqm to roughed surface, complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete alla s specifed and directed.

Material and labour for Screed bed or bedding layer of cement mortar (1:6), 15 mm thick for laying floor finishes complete all as specified and directed.

Material and labour for 25 mm thick cement concrete Type B1(1:2:4) (20 mm graded stone aggregate), as in floor , complete all as specified and directed.

Material and labour for Non Skid ceramic Coloured tiles , 7 to 8 mm thick , joint free(square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for Rectified coloured ceramic tiles (mat or glossy finish as directed by Engg-in-charge), 7 to 8 mm thick (square/rectangualr ) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

All as per srl item no 30 above but as in skirting of minimum 100 mm height and laid over 10 mm thick cement plaster in CM(1:4), complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles , joint free,on vertical surface of size 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over with 10 mm thick cement plaster in CM(1:4 ), complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

Material and labour for Granite (of any Type) work table rubbed and polished 18-20 mm thick machine cut,in steps, jams,pillars,window cills,cooking platforms and like laid and bedded over 15 mm thick cement mortar in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to macth with shade of granite and inlcuding making a hole of 15-20mm dia for gas pipe line in granite stone, one in each quarter, complete all as specified and directed.

Rounding the edge of stone slabs one edge such as in steps, cooking platforms, and the other simmilar situation , complete all as specified and directed.

Demolition of cement concrete (unreinforced) exc 15 cm thickness but above ground floor, sunkan floor, complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:3) as in sunken portion walls and floor,mixed with water proofing compound 3% by weight of cement, finishing surfaces even & smooth without using extra cement complete all as specified and as directed. Note :- water proofing compound shall be measured and paid under appropriate item of this Sch ‘A’

Supplying only integral water proofing compound, mixed as per instruction given over it , complete all as specified and directed.as per manufactures direction.

M&L for bitumen hot blown any grade, applied hot,in two coats to concrete surfaces at the rate of 1.5 Kg per Sqm per coat, including cleaning of surfaces, complete all as specified and directed.

Material and labour for laying 50 micron polythelene film, black in floors of sunken, complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in filling of sunken floor and mass concrete complete all as specified and as directed.

M&L for Cement concrete type, B1, 1:2:4 (20mm graded stone aggregate), 40mm thick including finishing the surfaces even and fair to receive floor finishes.complete all as specified and directed.

M&L for 50 mm dia GI spought pipe fixed in sunken floors by means of cutting holes in wall/ taking down old u/s pipe, fixed and beded in cement mortar/ PCC (1:2:4) and making good the disturbed portion of wall, complete all as specifed and directed .

Dismentling cast iron or reinforced concrete pipes ,floor/walls up to 100 mm bore jointed in cement mortar and taking out from trenches , if required , complete all as specified and directed.

Supply and fixed 50 mm bore cast iron soil waste and vent pipes ,sand cast pipe, in any length with or without ears, with cement joints, laid in trenches/ fixed to walls complete all as specified and directed.

Supply and fixed 100 mm bore cast iron soil waste and vent pipes, sand cast pipe, in any length with or without ears, with cement joints, laid in trenches complete all as specified and directed.

Supply and fixed 75 mm bore cast iron soil waste and vent pipes, sand cast pipe, in any length with or without ears, with cement joints, laid in trenches complete all as specified and directed.

Supply and fixed 100 mm bore cast iron soil waste and vent pipes, sand cast pipe, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed.

All as per srl item No 48 above but fixing only.

Supply and fixed 75 mm bore cast iron soil waste and vent pipes ,sand cast pipe, in any length with or without ears, with cement joints, fixed to walls, complete all as specified and directed.

All as per srl item No 50 above but fixing only.

Material and labour for extra over cast iron pipes and fittings if led joints is provided in liue of cement joints for 100 mm dia pipe, complete all as specified and directed.

Material and labour for extra over castiron pipes and fittings if led joints is provided in liue of cement joints for 75 mm dia pipe, complete all as specified and directed.

Supply and fixed in repair cast iron 'P' or ;S; trap 100 mm bore, complete all as specified and directed.

Supply and fixed in repair cast iron socket (double collar), 100 mm bore,complete all as specified and directed.

Supply and fixed in repair cast iron socket, 75 mm bore,complete all as specified and directed.

S&F in repair cast Iron 100 mm bore branch piece single, ( equal or unequal)single with acces door, ordinary or inverted (spigot or socket type) or with parrallel branches, with oval access door,cpmpepte all as directed.

Supply and fixed in repair cast iron bends, 100mm bore , (any radius),disiminishing pieces or tapper (larger bore measured) with oval asses door, comlete all as specified and directed.

Supply and fixed in repair cast iron bends, 75 mm bore , (any radius),disiminishing pieces or tapper (larger bore measured)with oval asses door, comlete all as specified and directed.

Supply and fixed in repair cast Iron 75 mm bore branch piece single, ( equal or unequal)single with acces door, ordinary or inverted (spigot or socket type) or with parrallel branches,with oval access doors, compepte all as directed.

Supply and fixed in repair for 75mm cast iron floor trap with SS grating 100 to 125 mm dia with or with out hole ,including jointing with solvent cement , joint to waste pipe fixed in cement concrete type B1(1:2:4) ,complete all as specified and directed.

supply and fixed in repair stack clamp for 75 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round iron stay including bolt and nuts and securing ends of stay to walls or roof , complete all as specified and directed.

supply and fixed in repair stack clamp for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16 round iron stay.including bolt and nuts and securing ends of stay to walls or roof, complete all as specified and directed.

Material and labour for providing precast cement concrete cover slabs using cement concrete Type B1(1:2:4), 20 mm graded aggregate, (for manholes etc) and simillar works , complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Material and labour 15 mm bore dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Fixing only 15 mm dia bore steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required, complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store

Material and labour 20 mm bore dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Fixing only 20 mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required, complete all as specified and directed.

Material and labour 25 mm bore dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, fixed in repair, complete all as specified and directed.

Fixing only 25mm dia steel tubes any grade to walls and ceilings or laying in floors, including new fittings as required including taking down old pipes, complete all as specified and directed.

Cutting chases, pining in making good to facing where required and pointing in cement mortar 1:3 for concealed water tubing , cutting not exc 10 cm girth, complete all as specified and diredcted.

Dismantling PVC water tanks Exc 250 Ltr and n exc 500 Ltr and removing to store.

Demolition of RCC water tanks of capacity exc 250 litre but not exceeding 500 litre and removing from site as directed by engineer in charge.

Material and labour, for three layered white colour Rotational moulded polyethylene water storage tanks of 500 ltr Capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Fixing only PVC water storage of capacity 500 litre, complete all as specified and directed.

Material and labour, 20mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed as in repairs,complete all as specified and directed.

Material and labour for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixedin repair to 20mm dia of pipe,complete all as specified and directed.

M&L Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed Screwed both ends for iron pipes or for union and fixed in repair to 15 mm dia of pipe,complete all as specified and directed..

Material and labour Vitreous china squatting pan , 'Orissa' pattern, size 580 x 440 mm white , with integral foot rests complete including provision of lime concrete bedding fixed as in repairs, complete all as specified and directed.

Material and labour PVC valveless , syphonic action type , flushing cistern, low level ,white, with inlet, ball valve, float and handle,completewith flush pipe of polythelene of low or high density or PVC 32 mm dia , including brackets/ fastening assesoriesof 10 litres capacity ,fixed in repair ,complete all as specified and as directed.

S&F in repair for mirror cabinet of min size 430x330 mm with openable door shutter as approved by GE,, complete all as specified and directed.

Material and labour Vitreous China wash basin, white, flat back,size 550x400mm fixed on brackets or stands , including 32 mm waste coupling of PTMT (half or full threaded)/ CP Brass and corrugated waste pipe with adopter of 900 mm long, fixed in repair, complete all as specified and as directed.

Supply and Fixed in repair wash hand basin Brass CP mixture for mixing hot and cold water screwed down for 15 mm iron pipe and fixed , complete all as specified and directed.

Supply and Fixed in repair 15 mm dia bore CP angular stop cock with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union , complete all as specified and directed.

Supply and Fixed in repair 15 mm dia bore CP concealed stop cock cast copper alloy chromium plated with long sahnk , fancy type,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed.

Supply and Fixed in repair PVC connections 15 mm size with PTMT nuts of length 450mm, complete all as specified and directed.

Supply and Fixed in repair PVC connections 15 mm size with PTMT nuts of length 600 mm,complete all as specified and directed.

Supply and Fixed in repair, 15 mm dia Bib taps , fancy type Chromium plated , screwed down , screwed for iron pipe or for brass ferrule.complete all as specified.

Supply and Fixed in repair, brass CP Wall mixer, 15 mm bore, for mixing hot and cold water , screwed down for iron pipe and fixed ,.complete all as specified.

Supply and Fixed in repair, wall mounted goose neck sink mixer( Hot and Cold) with provision of swivel arm , connecting legs and wall flanges,complete all as specified.

Supply and Fixed in repair, Brass Chromium plated shower rose 125 mm size with or without swivel joints,including fixing to steel pipe or union , complete all as specified and directed.

Supply and Fixed in repair, stainless steel soap dish ,complete all as specified and directed.

Supply and Fixed in repair, Glass Corner shelf (single) of size 300 MM(brass brackets), complete and fixed all as specified and as directed.

Supply and Fixed in repair, Brass CP tubular towel rail of 20 mm dia, D type ,60 CM long between flange, fixed in repair, complete all as specified and directed.

supply and fixing stainless steel towel ring round/square with cap , with fixinf screws, complete all as specified and directed.

Supply and Fixed in repair, sinks made of stainless steel 1mm thick kitchen or labo-ratory with plugs, washers and wastes including embedding SS sink in granite top RCC shelves with cement mortar as directed, connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including 40 mm bore dia CP waste coupling (half/full threaded PVC waste pipe min 900 mm long complete, all as specified and directed.

Supply and fixing in repair Kitchen Plate rack with of size 750x900 x 250mm of stainless steel complete.all as specified and as directed.

Supply and Fixed in repair, SS grating, 125 mm size( Dia /square) without hole , complete all as specified and directed.

Suply and Fixing coat hooks of six pegs made out of stainless steel 45 cm long (as per sample) , complete all as specified and drected.

Dismentling of boarding in any position and in any description fixed with nail , complete all as specified and directed.

Material and labour Factory made PVC cupboard sides, top & bottom frame (Each side measured Seperately), 30 mm (hollow) with a wall thickness of 5mm made out of extruded 5mm thick plain/printed / prelam PVC sheet reinforced with 19mm x 19mm MS square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with two numbers 150mm long brackets of 10mm x 10mm square tubes and cupboard frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum of 2 nos of srew to be provided horizontal member etc complete as per manufacter's instructions and all as specified and directed .Note :- Making good the disturbed side plastering and Painting with existing colour (Distemper/OBD ) included in the item, complete all as specified and directed .

Material and labour for Factory made PVC cupboard shutter of 30 mm thick consisting of frame made out of MS tubes of 19 gauge thickness and size 19mm x 19mm covered with panneling of 5mm plain plus 5mm thick prelaminated PVC sheet fitted in the MS frame and sealed to the front stiles and rails which should having 20mm x15mm wide PVC biding and attached to back stiles and rails (which should have a 5mm 45 degree bend portion as beding) and decorative PVC beding is used on the front side of pannel externally impart perfect finish to the shutter and joint together with solvent cement adhesive complete all as specified and directed.complete all as specified and directed .

Material and labour for Factory made PVC drawer of required size(Each side measured Seperately ) constructed by joining two nos 5mm thick plain PVC sheet at the sides and bottom joint together with solvent cement adhesive complete all as specified and directed.

Material and labour for , Factory made PVC centre partition shelfs of 25mm thickness consisting of MS Frame made out of MS tubeof 19 guage thickness and size of 15x15mm inserted all around the hollow profile section and insert 15mmx15mm MS tube in the centre of this section and liped with 10 mm (5mm x2 ) thick plain PVC sheet at the top and bottom and 20mm wide and 15mm thick on sides using solvent cement adhesive complete all as specified and directed .

Material and labour for 5mm thick termite proof, water proof and fire retardant laminated PVC sheet jointed together at front side of Cupboard drawer frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.

Material and labour for 5mm thick termite proof, water proof and fire retartant plain PVC sheet jointed together & fixed on back side of Cupboard frame using solvent cement adhesive complete all as specified and directed by Engr-in-charge.

Material and labour for 30 to 50mm wide and 5 mm thick laminated PVC leeping in front of the cupboard to be edge bonded using on the edges etc complete all as specified and directed.

M&L Continous piano hinges stainless steel, bright finish width of flaps when open 40 mm complete all as specified and directed by Engr-in-charge.

Supply and fixing SS handles , 100 mm size polished bright.complete all as specified and directed by Engr-in-charge.

Supply and fixing Drawer locks grade 1, size 50 mm brass 4 lever complete all as specified and directed .

Supply and fixing Hasp and staple safety type aluminium powder coated with mild steel pin inculding bolt to hinge plate and fix with screws 150 mm size of hasps and staples.complete all as specified and directed .

Supply and fixing Magnetic catcher for cupboards complete as all specified and directed by Engineer in Charge complete all as specified and directed .

Supply and fixing Supply and fixing in repair 350 to 450 mm length x 40 mm wide Mild Steel telescopic channel fixed to drawer with screws complete all as specified and directed .

Supply and Fixed in repair MS powder coated Curtain Rods 18 to20 mm bore over doors and windows , with fixing MS powder coated brackets,including screws,rawal plug ,and PVC powder coated fineals / fency type end bulbs at each end of curtains rod, any colour etc complete all as specified and directed.

Taking down Chowkhats or frames/ steel windows/ventilators, not exc 1.5 Sqm each (without taking off shutters from the frames)

Taking down shutter of area exc 1 sqm but n exc 2 sqm each.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing , complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg, complete all as specified and directed.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as specified and as directed.

S&F 125 mm size Extruded aluminium alloy handles, fabricated type, anodised all as specified and as directed.

S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

Supply and fixing factory made box type steel window with glazed shutter (outside) and gauged shutter (inner side), Box type section used in outer frame, sutter frame and centre frame shall be ERW section of 18 gauge. As per reference Drg No. CEAF/STD-184/2012, CEAF/STD-185/2012, CEAF/STD-186/2012, which include one MS handle 100mm long, 02 Nos MS tower bolt 150 mm long and 01 Nos peg stay arrangement in each shutter also pin holes to be provided @ 300mm C/C for supporting glass with GI clips wire in case of glazed shutter and 02 Nos of pintal Hinges 75mm long, 12mm dia with one of the hinge spot welded with frame and other with shutter for each openable shutter shall be provided and 04 Nos flat iron hold fast of size 25x3mm of length 250mm to 300mm long shall be welded with each window (all the iron mongry shall be ISI marked), including provn of MS guard bars of 10 mm square size welded with the help of MS fillet of size 25x3mm complete all as per sample and as directed. The Rates includes 4mm thick plain sheet glass in glazed shutter and galvanized wire mess 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in gauzed shutter and 02 coats of synthetic enamel paint over a coat of zinc chrome primer including preparation of new surfaces complete all as specified and as directed. Note: 02 Nos window in each quarter to be facilitated with space for desert cooler with openable/ detachable shutter and guard bars as per sample.

S&F steel ventilator with top hung shutters including hinges, steel peg stay complete, including two coats of synthetic enemell paint over a coat of red oxide primer, complete all a specified and directed.

Welding in repair n exc 6mm thick at metal and lenth of welding exc 2.5 cm but n exc 5 cm in lenth, complete all as specified and directed.

Supply and fixing 4 mm thick figuered glass,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane

Taking down chowkats & shutters without taking off shutters from the frame, size of opening exc. 1.50 sqm but not exc 4 sqm each. complete all as specified and as directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directed of size 125 X 60mm. . complete all as specified and as directed.

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc complete all as specified and directed of size 105 X 60mm. complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 using 20 mm graded agg as in back of pressed steel chowkhatsetc complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded agg as inhold fast of steel chowkhat/ frames etc complete all as specified and directed.

Supply and fixed in repair ,Mild steel framed work confirming to Fe410 W (grade E-250) quality A as in doors or gates of angle or other section including drilling, notching, if required and hooks / hinges 100 mm for fixing doors shutter etc complete all as specified and directed.

Supply and fixing, Factory made, 35mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces using 2nd class HW as in rail and style. The size of rail and style as per IS-1003 (part – I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supply and fixed 35mm thick glazed and skelton shutter IInd class hard wood ,open rebated and prepare to receive glass, gauge etc. (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part-1, complete all as specified and directed.

Taking down shutter of any description exc 1.00 sqm but not exc 2.0 sqm each and refixing in same opening after easing and adjusting (Chowkat/frame changed) etc , complete all as specified and directed.

S&F in repair 100 mm Butt hinges medium weight, cold rolled mild steel , fixed in repair, complete all as specified and directed.

S&F 150 Aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

All as per Srl item no 138 above but fixed in repair tower bolt, complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised , sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed ,complete all as specified and directed.

All as per Srl item no 140 above but fixed in repair sliding bolt, complete all as specified and directed.

S&F 150 mm extruded Aluminium alloy handles, fabricated type anodised, complete all as specified and directed.

All as per Srl item no142 above but fixwd in repair handles, complete all as specified and directed.

S&F floor door stopper of size 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floors.complete all as specified and directed.

S&F mild steel 150 ordinary rat tail rod pattern springs, including roller and roller plate fixed in repair, complete all as specified and directed.

Supply and fixing galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete.

Supply and fixing in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tack or galvanised wire staple complete.

M&L applying Two coats of Synthetic enamel paint over a coat of pink primer including prepration of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth, complete all as specified and directed.

M&L Preparation of old wooden surface and applying one coat of synthetic enamel paint complete, all as specified and directed.

S&F in rapars Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing,cooler stands , ladders (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 290-Gde E-165, complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed

Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or grith and applying one coats of synthetic enamel paint over complete all as specified and as directed.

M&L, Removing bushes , uprooting grass, on old mud phuska roof , removing rubbishoff the premises, cleaning surfaces and prepairing to receive new mortar and including raking out joints , hacking for keys, to brick tiles and applying flush pointing to existing brick tiles with Cement mortar (1:3) ,mixed with cruid oil, complete all as specified and directed.

M&L for Roughening and cleaning of old condrete surfacet roof top by picking, sweeping cleaning and washing down with water to remove dust or loose particles etc including applying cement slurry @ 3Kg cement per square meter over cleaned roof surface before padding wk , complete all as specified and directed .

M&l for providing cement concrete type BO (1:2:4) 12.5 mm graded stone aggregate for providing slope , ,maintain level , roof kerbs or mud stops rounded or chamfered edges, complete all as specified and directed.

M&L for 10 mm thick cement screed bed or beding layer / plaster in cement (1:4) mixed with water proofing compound on concrete roof surface , complete all as specified and directed.

M&L APP based polymeric membrane minimum wieghing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster Non wove fabric (weight not less than 150 gms/sqm) laid over a coat of hot bitumen 85/25 @ 1.20 kg per sqm by torch application over a coat of bitumen primer, including a coat of aluminium paint applied on mambrane ,complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonary ,built in cement mortar or cement lime mortar.complete all as specified and directed.

Material and labour for brick work with subclass B bricks , straight or curved on plan exc 6 m mean radius , buit in cement mortar (1:6), complete all as specified and directed.

Material and labour for brick work with subclass B bricks , straight or curved on plan to any radius in half brick thick wall, buit in cement mortar (1:4), complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed of CM1:4 including rubbing and polishing, complete all as specified and directed.

M&L machine cut kota stone slab 20-25mm thick in riser of steps ,skirting, dado and pillar laid over cement screed and cement slurry including 10mm thick cement plaster 1:3 CM to receive kota stone and jointed rubbing and polishing complete all as specified and directed.

S & F in repair 110mm bore PVC SWR pipe ,single socketed in any length with rubber ring joint fixed to walls in repair, complete all as specified and directed.

S & F in repair 110mm bore PVC SWR pipe ,single socketed in any length with rubber ring joint laid in trenches, fixed in repair, complete all as specified and directed.

S&F 110 mm bore PVC SWR Couplers, complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends , complete all as specified and directed.

S & F 75mm bore PVC SWR pipe single socketed in any length with rubber ring joint laid in floor,fixed in repair, complete all as specified and directed

M&L for 75mm PVC SWR floor trap plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L for 75mm PVC SWR multi floor trap plain with grating including jointing with solvent cement, complete all as specified and directed.

S & F 75mm bore PVC SWR pipe single socketed in any length with rubber ring joint fixed to wall incl dismantling old pipe, complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends with access door, complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends, complete all as specified and directed.

S & F 75 mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 75 mm bore PVC SWR junction single( Single T) equal or unequal, complete all as specified and directed.

S&F PVC SWR 75mm bore branch piece double ( Double Y) equal or unequal with acces door, complete all as specified and directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc , complete all as specified and directed.

Taking down carefully UNSV DB's including MCBs of of any size make, type and capacity and making good disturbed surfaces of wallls/roofs etc, complete all as specified and directed.

Concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 19mm dia ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,switches,sockets outlets,regulators etc complete including provisining of 1.0 sqmm PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly, complete all as specified and directed.

One light/fan/bell point controlled by one switch 6 amp one way

One bell point controlled by one switch 6 amp one way on same board with other switches or indepepent board one way

One 3 pin socket 5 amp on the independent board.

One 3 pin socket on same board with other switches.

all as decribed above but one light point controlled by two-2 way switch.

All as described above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

M&L switch piano flush type single pole, one way 5 amp .

M&L switch piano flush type two way 5 amp .

M&L switch piano flush type single pole, one way 15 amp .

M&L socket outlet piano flush type 2 in 1, 3 pin 5 amp.

M&L socket outlet piano flush type 2 in 1, 3 pin 5 &15 amp.

S/fix stepped type Electronic fan regulator .

M&L switch flush type bell push button 5 amp .

S&F bell Ding dong AC 230Volts single pole.

S/fix ceiling rose 65x17mm of three terminals.

S&F 1X18 watt incl taking down wall mounted, new generation LED T-8 Retro fit for multipuspose application with LED Rod , made from exturded aluminium housing,polycarbonate diffuser including all fixing accessories & connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

S&F 1X10 watt incl taking down wall mounted, new generation LED Batten fitting for multipuspose application with exturded aluminium housing with decorative end caps including all fixing accessories & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge.

Supply and fix incl taking down new generation energy saving 9/10 watt LED bulk head (porch light fitting) made of plasitic housing with opal diffuser complete all as specified and directed by Engr in Charge.

Disconnecting electric connection and taking down carefully ceiling fans/walls fan/exhaust fan/Aircirculator fan any sweep and removing fan and fan blades to AGE E/M storeyard as directed by Engr-in-Charge

M &L for painting of c/fan with two coats of white synthetic enamel paint and marked MES no by black permanent marker all as directed by Engr in Charge.

M &L for painting of ex/fan with two coats of white synthetic enamel paint and marked MES no by black permanent marker all as directed by Engr in Charge.

Fixing ceiling fan of any sweep to same site after repair/servicing including flexible cable from ceiling rose to fan complete all as specified and as directed by Engineer-in-Charge

Fixing exfaust fan of any size to same site after repair/servicing including flexible cable from ceiling rose to fan complete all as specified and as directed by Engineer-in-Charge

Supply & fix Exhaust fan AC single phase metalic body 230 V of size 300 mm sweep including of making hole etc all as specified and directed.

Supply and fixing metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp concealed in wall all as directed .Make : C&S/Havells/Standard

Taking down carefully copper / Aluminium wiring and removing materials from site as directed and making good disturbed surface as directed

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2.5 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 2.5 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

M&L submain wiring with 2 runs of copper conductor PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked 25mm dia as per IS specification fixed concealed in wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 4 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

S/Fix MCB DB TPN 4 Way vertical type factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including Provision for fixing one MCCB upto 125A.(MCCB will be measured and paid separately under respective items of sch A):-

S/Fix MCB DB SPN 8 Way factory made IP 43 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed.

S&F MCCB 100 Amp 3P 16 Ka for fixing in DB all as directed by Engr-in-Charge

S&F MCBs 240/415 Volts 10 KA finger proof terminal, B curve bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB . (DB will be measured and paid separately under respective items of sch A):-

MCB SPN 40 Amps.

MCB SP 5 to 32 Amps

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed.

Disconnecting electric and water connection connection and taking down carefully Geyser and deposited to AGE E/M storeyard and refixing geyser at same location, complete all as specified and directed.

M&L For Meter Box of size 0.75 MX0.60 M of .30 m width of MS Sheet of 3 mm thickness and a clamping or supporting sheet inside for suppoting of 4 Nos Meter and door with 1 Nos of transparent glass of 5 mm thicknesssuitable for visibility of 4 Nos meter fixed on door with suitable arrangemnets. There should be 8 Nos hole for entering of 25 mm dia pipe. meter box shall be fixed in wall and necessary chiseling and meke good of wall and painting of meter to be included in quoted cost drawing of meter box to be approved by GE.

Disconnecting electric connection and taking down carefully energy meter and deposited to AGE E/M storeyard and refixing energy meter in meter box with qtr no wrtitten on meter by Black permanet marker, complete all as specified and directed.

Surindera Kumar Bansal

shree balaji builders