GE/BAS-24/2025-26 Day to Day Maint petty repair through online complaint system at Usman, Thimmaya Bana Singh, Somnath Encave at Basoli under GE Basoli

Amount

Taking down steel water tubing and connection of 15mm bore complete all as specified and directed.

Refixing old steel tubing and connections 15mm bore in new or old position (wall, ceiling ,floors etc) complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete complete all as specified and directed

Taking down steel water tubing and connection of 20 mm bore complete all as specified and directed.

Refixing old steel tubing and connections 20mm bore in new or old position (wall, ceiling ,floors etc) complete all as specified and directed.

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete complete all as specified and directed

M&L for replacement of GI socket 20 mm bore medium grade ISI marked complete all as specified and directed. Note Cost of taking down GI tubing for replacement of worn out/defective GI fitting & refixing there after shall be deemed to be included in rates quoted by the contractor.

All as per Srl item no 7 here-in-before but GI elbow 20 mm dia

All as per Srl item no 7 here-in-before but GI nipple 20 x 50 mm

All as per Srl item no 7 here-in-before but GI nipple 20 x 75 mm

All as per Srl item no 7 here-in-before but GI nipple 20 x 100 mm

All as per Srl item no 7 here-in-before but GI nipple 20 mm dia for tank

All as per Srl item no 7 here-in-before but GI union 20 mm dia

All as per Srl item no 7 here-in-before but GI reducer socket 25 x 20 mm

All as per Srl item no 7 here-in-before but GI plug 20 mm dia

All as per Srl item no 7 here-in-before but GI tee 20 mm dia

M&L for replacement of GI socket 15 mm bore medium grade ISI marked complete all as specified and directed. Note Cost of taking down GI tubing for replacement of worn out/defective GI fitting & refixing there after shall be deemed to be included in rates quoted by the contractor.

All as per Srl item no 17 here-in-before but GI elbow(bend) 15 mm dia

All as per Srl item no 17 here-in-before but GI nipple 15 x 50 mm

All as per Srl item no 17 here-in-before but GI nipple 15 x 75 mm

All as per Srl item no 17 here-in-before but GI nipple 15 x 100 mm

All as per Srl item no 17 here-in-before but GI nipple 15 mm dia for tank

All as per Srl item no 17 here-in-before but GI union 15 mm dia

All as per Srl item no 17 here-in-before but GI reducer socket 25 x 20 mm

All as per Srl item no 17 here-in-before but GI plug 15 mm dia

All as per Srl item no 17 here-in-before but GI tee 15 mm dia

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint in walls complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old any type of pipe complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old any type of pipe complete all as specified and directed.

S & F in repair PVC SWR Bends in any radius 110 mm bore with access door in repair all as specified and directed.

S & F in repair PVC SWR Bends in any radius 75 mm bore with access door in repair complete all as specified and directed.

S & F in repair PVC SWR Bends 110 mm bore in repair complete all as specified and directed.

S & F in repair PVC SWR Bends 75 mm bore complete all as specified and directed.

S&F in repair SWR) Vent cowl 110 mm bore in repair complete all as specified and directed..

S&F in repair PVC (SWR) Vent cowl 75 mm bore in repair complete all as specified and directed..

S & F in repair Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and directed.

S & F in repair Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and directed.

S & F in repair Pillar taps , cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S & F in Repairs of rubber washer for stop cock, bib tap, Pillar tap ,gate valve of any type complete all as specified and directed

S & F in Repairs brass spindle/disc suitable for Cp piller tap,cp bib tap,angle cock complete all as specified and directed

S & F in repair Sintex water tank cover (Dhakkan) tied with wire for 500 and 1000 Ltr capacity water storage tank.complete all as specified and directed

S&F in repair Center hole mixer(wall mixer), Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair Center hole mixer(WHB), Brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed with15 mm bore pipe including all necessary fixing arrangement complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union complete all as specified and directed.

S & F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and as directed .

S & F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and as directed .

S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repair CP Health faucet (ABS Body) / Jet spray mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair Chromium plated Soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia 'D' type 60 cm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair Brass chromium plated tubular towel ring, size all as specified and directed by Engr in charge fixed with chromium plated brass screws and wooden/plastic cleats.

S & F in repair 5.5 mm thick sheet glass shelf of size 600 mm x 110 mm with transparent glass,rust proof railing fixed with screw on wall complete all as specified and directed.

S & F in repair Stainless steel shelf of size 600 mm x 100 mm with transparent glass,rust proof railing fixed with screw on wall complete all as specified and directed.

S & F in repair Corner Glass shelf of size 300 mm x300mm with transparent glass,rust proof railing fixed with screw on wall complete all as specified and directed.

S & F in repair CP Brass bottle trap having minimum water seal 25 mm complete all as specified and directed.

S&F in repair waste coupling of (half or full threaded), 40mm dia, minimum weight 45gms) for sink as complete all as specified and directed.

S&F in repair waste coupling of (half or full threaded), 32mm dia, minimum weight 45gms) for WHB urinal as complete all as specified and directed.

S&F in repair waste pipe for WHB/Sink for 32/40mm dia complete all as specified and directed.

S&F in repair Stainless steel gratings with or without Hole 100/125/150mm dia fixed with cement mortar/ white cement complete all as specified and directed.

S&F in repair urinal pipe for 40mm dia all as specified and directed.

S&F in repair PVC Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.

S&F in repair PVC Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 25 mm dia (minimum weight 210 gms) complete all as specified and directed.

S & F in repair PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, complete all as specified and directed.

S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S & F in repair Vitreous china wash basin, white, flat back, size 550x400mm including waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., complete all as specified and directed

S & F in repair Vitreous china Urinal, Half stall type, white ( excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete complete all as specified and directed.

S & F in repair Plastic Seat Cover white / any colour as per Engr in Charge for Water closet (Pedestal Pattern) with screws complete all as specified and directed.

S&F in repair 18-20mm thick prelaminated high density PVC board having density 8 kg /sqm ,100% termite/ fire retrandent eco friendly soild board one side decorative choice laminate and other side balancing white as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc excluding Cupboard hinges , Aluminium handle , towerbolt, hasp and staple , piano hinges, Magnet catcher and channel where required size as per dirn of Engr in Charge including taking down of old Cupboard of any type complete all as specified and directed .

S & F in repair hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length complete all as specified and directed.

S&F in repair Brass Mortice lock for Aluminium doors with fittings ,concelead type, size 100 mm including complete accessories complete all as specified and directed..

S&F in repair 30 / 40 mm flaps width continuous (paino) hinges mild steel brass bright finished or electrogalvanised complete all as specified and directed.

S & F in repair/new Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed .

S & F in repair Butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed.

S&F in repair for crank hinges for kitchen cupboard/ almirah. Any size any type for md offrs accn complete all as specified and as per sample kept in GE office.Make:-Hettich,Godrej Harrison or equivalent make.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. (Including necessary fittings) complete all as specified and directed.

S & F in repair/new 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.

S & F in repair/new 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed .

S & F in repair/new Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed by.

S&F in repair for 140mm door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed .

S & F in repair/new 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and directed

S & F in repair Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and directed.

S&F in repairs Stainless steel grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .

S&F in repair 3 mm thick sheet glass , ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified and directed.

S&F in repair 3 mm pin headed frosted glass , ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified. complete all as specified and directed.

M&L Rendering cement plaster, 10 mm thick on fair faces of brick/concrete surfaces of wall in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified and directed .

M&L Rendering 15 mm thick on fair faces of brick or concrete surface walls in cement mortar 1:4 rendering is to be finished even and fair without using extra cement complete all as specified and directed .

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on celling of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for complete removal of existing treatment on walls/ceiling and making true uniform surfaces by 1mm thick wall care putty on old wall/new plastering surface complete all as specified and directed.

Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper including smoothing of plastered surface by applying wall care putty and one coat of primer complete all as specified and directed.

Material ad labour for Preparation of new plastered/ concrete surfaces of walls and applying two coats of cement based paint over and including one coat of primer (up to 2nd storey with necessary/scaffolding) complete all as specified and directed.

Material ad labour for Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white washing complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of wall and applying one coat of white wash upto Third Floor complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old painted surfaces of wood or wood based surface of any description over 10 cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted surfaces of steel of any description over 10cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40 mm graged crushed stone aggregate as in foundation filling and mass concrete (sunken floors etc) complete all as specified and directed.

M&L for Rendering 15mm on bricks work or concrete surface in CM 1:4 with and including water proofing compound to sunken portion with proper slope toward out side and finishing cement or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 complete all as specified and directed.

Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Complete all as specied and directed.

M & L for Durastone / Endura heavy duty virtified tiles of size 300mmX300mmX 8 to 9mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of 1:4 cementmortar finished ceemnt concrete surface fair & Smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as specified and directed.

S & F in repair Stainless steel gratings with or without Hole 100/125/150mm dia fixed with cement motar/ white cement complete all as specified and directed.

S&F in repair waste pipe for WHB/Urinal/Sink for 32/40mm dia complete all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but n exc 4 sqm each and removing from site complete all as specified and directed

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and directed .

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and directed

S&F for pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc with red oxcide primer complete all as specified and directed

S&F for pressed steel frames of size 105mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc with red oxcide primercomplete all as specified and directed

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats Complete all as specified and directed.

M & L 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed

M & L 35 mm thick, 2nd class soft wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified and directed

M & L 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with particle board core all as specified and directed.

M & L for preparation of new painted surfaces of steel of any description over 10cm with or girth and painted with one coat of synthetic enamel paint complete all as specified and directed

M & L Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II, 2004 complete all as specified and directed

M & L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2004 complete all as specified and directed

Dismantling and taking out burnt winding by cutting, cleaning slots and re-winding of AC ceiling fan motor 1200mm of any make of fan with super enameled copper winding wire of existing gauge including, sleeve work, varnishing with E class insulation varnish, complete all as specified and directed including taking down & refixing the same (Note :- (i) Motor shall be wound with machine only.(ii) super enameled copper winding wire shall only be used.

Replacement of old unserviceable gun metal bush of ceiling fan complete all as specified and directed.

Replacement of old unserviceable capacitor 2.5 mfd ISI marked complete all as specified and directed.

Replacement of old unserviceable capacitor 3.15 mfd ISI marked complete all as specified and directed.

Replacement of old unserviceable ball bearing suitable for 1200 mm sweep complete all as specified and directed.

Replacement of old unserviceable shackle assy kit (rubber real -01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed.

Replacement of old unserviceable fan blades, ISI Marked, suitable for 1200/1400mm sweep ceiling fan of any make complete all as specified and directed.

Repalcement of old unserviceable MS down rod of appropriate External dia of ceiling fan complete (length of rod not less than 45cm and not more than 60cm and 15 mm dia) complete all as specified and directed.

S & F Canopy for ceiling fan as per existing sample complete all as specified and directed.

S & F PVC Two way connector for ceiling fan complete all as specified and directed.

Replacement of old unserviceable steel screw (to be used for fixing of fan blade) as per sample/site requirement of fan complete all as specified and directed.

Servicing of ceiling fans of capacity 1200 mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as specified and directed. . (Unserviceable parts if any will be measured and paid seperately).

Dismantling and taking out burnt BLDC ceiling fan Driver card with Replacement to new BLDC ceing fan Driver card of AC ceiling fan1200mm of any make of fan complete all as specified and directed including taking down & refixing the same.

Supply only 1200 mm BLDC ceiling fan remote suitable for as per existing fan complete all as specified and directed.

Supply and Fix cable PVC insulated and overall sheathed with flexible copper conductor Single core of size 1.0 sqmm complete all as specified and directed.

Dismantling and Re-winding of exhaust fan/industrial fan motor 250-300 mm sweep any make of fan with super enameled copper winding wire of suitable gauge as per existing including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections fan complete all as specified and directed (Note :- (i) Motor shall be wound with machine only.(ii) super enameled copper winding wire shall only be used.

S & F louver, suitable for exhaust fan of any make and size upto 250-300 mm, fixed in repair complete all as specified and directed.

Disconnecting the inlet/outlet water connections and electric connections of storage type electric water heater of capacity 25 Ltrs capacity, taking down carefully from wall after unscrewing nut/bolts ,checking the outer body for any cracks and strip opening the same carefully for thorough inspection of serviceablity/functionality of parts such as internal tank, syphon assembly, thermostat switch, heating element, glass wool etc, servicing complete and re-assembling and re-fixing after repair,fixing to wall testing, installation and commissioning all as directed. Note: (a) The spares required for replacemeny shall be measured and paid under relevant Schedule items of Sch here-in-after.

Supply only syphon assembly made out of SS of 25 ltr capacity including necessary studs screws and rubber gasket/washers matching with existing/new inner tank complete all as specified and directed

Supply only thermostat switch ISI marked for storage type electric water heater AC 230 volt adjustable range from 0-90 degree Celsius) complete all as specified and directed.

Supply only cup/triangular type storage type electric water heater element AC 230 volt, of rating 1500/2000 watt complete all as specified and directed.

Supply only indicator lamp square/round type suitable for storage type electric water heater 25 ltr all as per sample AC 230 Volt complete all as specified and directed.

Supply and replacement cable flexible PVC insulated, PVC sheathed, copper conductor, 3 core 0.75 mm.complete all as specified and directed.

Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

De-scaling of storage type electric water heater of capacity 25 ltr after taking down the storage type electric water heater from wall, strip opening the assembly, de-scaling the syphon assembly and refixing the assembly and re-installation of storage type electric water heater complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm ISI Marked complete all as specified and directed.

Replacement of safety valve/dead wt. valve ISI marked suitable for 25 Ltrs capacity storage type electric water heaters.complete all as specified and directed.

Supply and fix gun metal glove or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 15 mm.complete all as specified and directed.

Supply and fixing anchor bolt suitable for geyser/Exhaust fan complete all as specified and directed. (Note:- Anchor bolt shall be grouted with hammer drill only)

Supply and replace brass non return valve suitable for 25 ltr storage type electric water heater of size 15 mm.complete all as specified and directed.

Supply only wiring for desert cooler including all accessories complete all as specified and directed.

Supply only blower motor of single way shaft 240 Volts 50 c/s of suitable capacity for desert cooler of capacity 3000 CFM to 5000 CFM single way shaft 240 Volts 50 c/s complete all as specified and directed.

Supply only water circulation pump suitable for desert cooler of capacity 3000 CFM to 5000 CFM 240 volts 50 c/s single phase complete all as specified and directed

Supply only Khaskhas pad honey bee type (set of 3) for Desert Cooler of any capacity ( Set of three) complete all as specified and directed f

Material and labour in replacement of Fan blade hub assly only for Blower motor of desert cooler made of alloy/Forged steel suitable for 3000 to 5000 cfm capacity Desert Cooler complete all as specified and directed

Material and labour in replacement of Capacitor of capacity 4mfd suitable for desert cooler complete all as specified and directed

Supply and fixing plug top polycarbonate 3 pin, 15Amp complete all as specified and directed.

Supply and fixing plug top polycarbonate 3 pin, 5 Amp complete all as specified and directed.

Supply and fixing of 2.5 sqmm 3 core copper conductor wire minimum 2.5 meter length with plug top polycarbonate 3 pin, 5Amp complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm in FRLS PVC concealed conduit heavy duty and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and drawing 1.5 sqmm PVC insulated fire retardant stranded copper conductor cable as earth continuity wire in green colour connected to common earth and each terminal box/fitting but in existing conduit and pressed steel terminal boxes complete all as specified and directed.

All as per items no. 165 above for one light point controlled by 2 nos two way switches but in existing conduit and pressed steel terminal boxes complete all as specified and directed.

All as per items no. 165 above but for one 3 pin 5A socket outlet independent board but in existing conduit and pressed steel terminal boxes complete all as specified and directed.

All as per item no. 165 above but for one 5A socket outlet on the same board but in existing conduit and pressed steel terminal boxes complete all as specified and directed.

All as per item no. 165 above for 15/16 Amps socket out let independent with 4.0 sqmm copper conductor and –ditto-. but in existing conduit and pressed steel terminal boxes complete all as specified and directed.

M & L for replacement of existing un-serviceable switch with switch piano polycarbonate body flush button single pole two way 5 amps, 230 volts. complete all as specified and directed.

M & L for replacement of existing un-serviceable switch with switch piano polycarbonate body flush button single pole one way 15 amps, 230 volts. complete all as specified and directed.

M & L for replacement of existing old u/s switch with switch piano polycarbonate body type single pole one way 5/6 Amp, 230 volts. complete all as specified and directed.

M & L for replacement of existing old u/s switch socket combination with socket combination Polycarbonate body 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

M & L for replacement of existing old u/s switch socket combination with socket combination Polycarbonate body ,5 pin , 5 Amp flush type complete all as specified and directed.

M & L for replacement of existing old u/s socket outlet with socket outlet Polycarbonate body , 5 pin 5 Amp flush type complete all as specified and directed.

M & L for replacement of existing old u/s bell push with bell push polycarbonate body type 5/6 Amp, 230 volts. complete all as specified and directed.

M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified. complete all as specified and directed.

M and L for replacement of existing old u/s fan regulator with fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed.

M and L for replacement of fan regulator suitable for BLDC fan and connecting electrically complete all as specified and directed.

M & L for replacement of existing old u/s switch socket combination with socket combination Polycarbonate body ,5 pin , 5 Amp flush type with pvc box all as specified and directed.

M & L for replacement of existing old u/s switch socket combination with socket combination Polycarbonate body ,5 pin , 15 Amp flush type with pvc box complete all as specified and directed.

M & L for replacement of existing old u/s ceiling rose with ceiling rose Polycarbonate body surface bakelite 2 to 3 terminals, 230 volts. complete all as specified and directed.

S & F for replacement of existing old u/s lamp holder with lamp holder batten type polycarbonate body with back plate for batten fitting complete all as specified and directed.

M & L for replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

M & L for replacement of existing old u/s submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in and including concealed PVC conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.

M & L for replacement of existing old u/s tube light fitting with batten type 18/20 watt energy efficient tube light fittings LED complete with minimum 3.5/4 feet long with all accessories prewired and making connection with copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fittings complete all as specified and directed.

Supply and fixing LED Bulk head light fitting 1 X 9/10 watts cool Daylight (CDL) round type premium quality diffuser for even distribution of light complete , connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

M & L for replacement of existing old u/s tube light fitting with batten type 10 watt energy efficient tube light fittings LED complete with minimum 2 feet long with all accessories prewired and making connection with copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fittings complete all as specified and directed.

M & L for replacement LED lamp 7 watt , 230 volts retrofit type complete all as specified and directed.

M & L for replacement LED lamp 15 watt , 230 volts retrofit type complete all as specified and directed.

M & L for replacement LED lamp 12 watt , 230 volts retrofit type complete all as specified and directed.

Supply & Fix in replacement sheet metal enclosure 4 way , with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply & Fix in replacement sheet metal enclosure 8 way, with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply & Fix in replacement sheet metal enclosure 12 way, with SPN DB's ( grouted in walls) double door type IP-43 Protection. Isolated Neutral,Door earthing, cement spill protector, IK-08 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply and fix in replacement of existing old u/s MCB SPN with MCB SPN ,240 volts, 32 amps, with rupturing capacity 10 KA, complete all as specified and directed.

Supply and fix in replacement of existing old u/s MCB SPN with MCB SPN ,240 volts 40 amps, with rupturing capacity 10 KA, complete all as specified and directed.

Supply and fix in replacement of existing old u/s MCB SPN with MCB SPN ,240 volts any rating from 63 amps, with rupturing capacity 10 KA, complete all as specified and directed.

Supply and fix in replacement of existing old u/s MCB TPN with 63 amp MCB TPN ,415 volts breaking capacity 10 KA, complete all as specified and directed.

Supply and fix in replacement of existing old u/s MCB TPN with 40 amp MCB TPN ,415 volts breaking capacity 10 KA, complete all as specified and directed.

Supply and fix in replacement of existing old u/s MCB TPN with 32 amp MCB TPN ,415 volts breaking capacity 10 KA, complete all as specified and directed.

S & F VTPN DBs Double Door 4 way suitable for MCCB incomer, IP 43 protection 415 V AC, 50 Hz AC appropriate size of bus bar and neutral link complete all as specified and directed

M&L for Replacement of unserviceable MCCB 100 Amps current carrying capacity 16 KA , AC 415 Volts three pole complete all as specified and directed. including dismentling the existing with all connections & fixing the new with all connections complete all as specified and directed.

Supply and fix in replacement MCB single pole 240 volts any rating 6 to 32 amps, with rupturing capacity 10 KA, complete all as specified and directed.

Supply and fix in replacement MCB single pole 240 volts any rating 40 amps, with rupturing capacity 10 KA, complete all as specified and directed.

Supply & fixing in repair of Hylum sheet 5x5 to 10 x 12 inches for fixing of switches, sockets etc including cutting for fixing on existing or new sunken box with brass screw complete all as specified and directed

Supply & fixing in repair of pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc) made of not less than 16 gauge MS sheet and 6cm depth of size 4x4 to 10 x 12 inches for fixing bakelite sheet of suitable size complete all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. complete all as specified and directed.

S & F High performance IP66 LED Streetlight 35 watt, housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5 sqmm from ceiling rose, and 35W LED light etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.5 m length with suitable fixing accessories on walls, complete all as specified and directed. Make: Wipro Cat Part No. LR02-261-XXX-57-XX or its equivalent of Bajaj/Havells/Philips

Supply and fixing of flexible PVC pipe of 20 mm dia for protection of wire complete all as specified and directed.

Supply and fixing of flexible PVC pipe of 32 mm dia for protection of wire complete all as specified and directed.

KHOSLA ENGINEERS BUILDERS (BID ID -3338058)

dadwal engineers (BID ID -3338097)

KAPOOR AUTOMOBILES (BID ID -3338021)

M/S V K TRADERS (BID ID -3338295)

Standard engineers (BID ID -3337485)

Ashoka Engineers (BID ID -3338056)