PETTY REPAIR/ MAINT OF INTERNAL WIRING, FIXTURE, FITTINGS AND ALLIED WORKS AT

Amount

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket ETC. from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes complete all as specified and as directed.

Material and labour for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS , copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly drawn through conduit but including provn of new galvanised modular concealed box with suitable back & front plate for housing the modular switches, sockets & fan regulators for the items mentioned in 2.01 to 2.04 below:

One light/fan/bell point controlled by one No, one way switch.

One 6 Amp socket outlet point controlled by one No, one way switch on same board

One 6 Amp socket outlet point controlled by one No, one way switch on independent board

One 16 Amp socket outlet point controlled by one No, one way switch on independent board with cable of size 2.5 sqmm 1100 Volts including one run of size 1.5 sqmm as earth continuity conductor all as directed Note for item no. 2.00 to 2.04 :- . (i) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (ii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

Supply and fix modular switch 1 way 6 Amp, SP, one module 230 volts AC complete all as specified and as directed.

Supply and fix modular switch 1 way 16 Amp, SP, one module 230 volts AC complete all as specified and as directed.

Supply and fix modular socket outlet 2/3 pin combined 6 Amp, 230 volts two module AC complete all as specified and as directed.

Supply and fix modular socket outlet 2/3 pin combined 6/16 Amp, 230 volts two module AC complete all as specified and as directed.

Supply and fix modular type electronic fan step regulator 120W, modular type 2 module complete all as specified and as directed.

Supply and fix modular bell push switch 6 Amps, one module 230 Volts AC complete all as specified and as directed.

Supply and fix in replacement LED tube light fitting 1x 20 watts, 220 volts AC, 1200mm, with Aluminium housing & integrated electronic driver complete with driverwith polycarbonate diffuser & thd, 10 % including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make- Havells ENDURALINEARNEOBS20WLED865SPCWH or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement sleek LED mirror light with high output diffuser 2 feet, 10 watts, 220 volts AC decorative type complete with driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in replacement LED luminaire 595 x 595 x2 mm,2x2 42 watts (warm white), 220 volts AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified. Make- VENUSNEOHE2x2PLR18-42WLED830 MOD Havells or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement LED luminaire 1180x280x70 mm (4x1), 30 watts, cool white 220 volts AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified. Make- VENUSNEO4X1PLR28WLED830S Havells or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement LED luminaire recess mounted downlighter with pressure die cast aluminium heat sink & PC diffuser round shape 24 watts, 220 volts AC finished in white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified. Make- INTEGRANEODLR24WLED840S Havells or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement LED luminaire recess mounted downlighter with pressure die cast aluminium heat sink & PC diffuser round shape 15 watts warm white/cool white, 220 volts AC finished in white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified. Make- INTEGRANEODLR15WLED840S Havells or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement LED luminaire recess mounted downlighter with pressure die cast aluminium heat sink & PC diffuser round shape 7 watts warm white/cool white, 220 volts AC finished in white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified. Make- INTEGRANEODLR24WLED840S Havells or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement LED luminaire Suspended architectural LED luminaire provides soft light and glare free symmetrical illumination with continuous mounting end cap of size in mm 1200X106X60 40 watts, 220 volts AC recessed type with diecast housing finished in white powder coated complete with suitable driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose surface complete all as specified. Havells cat part no 40W8401144 or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement post top lantern 35 W energy saving, environmental friendly , long life aesthetically designed with good indirect symmetrical light distribution , die cast aluminum landscape IP65 luminaire with IP 65 rating with high power COB LED as light source along with its mounting accessories . Make - Havells ENDURASPRING6PT35WLED740PSYMTOTG or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement Cone NXG sturdy LED bollard 8 W conical type with uniformly lit diffuser at the upper portion for landscape lighting complete with mounting on PCC cube (15x15x15 cm) along with nut bolts and its grouting complete all as specified and as directed by Engr-in-Charge. Make- CONENXGBLS8WLED830PSYMTOPC (0.6m) Havells or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement spot light fittings LED type recessed mounted aluminium body round shape ivory powder coating finished 86mm dia of capacity 7 watt complete all as specified and as directed.

Supply and fix in replacement Engagement light LED type with Red and Green compartment 230 volts with LED lamp 9 watt complete all as specified and as directed.

Supply and fix in replacement LED twin light fitting suitable for mounting on photo frame consisting of 02 Nos LED candle lamp 3 watt warm white 230 volts complete all as specified and as directed.

Taking down submain wiring including taking out conduit pipe of any description and of any size complete all as specified and as directed.

Supply and fix in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type in pvc conduit for continuous earth wire and connected to common earth dolly complete all as specified and as directed.

All as per item No 23.00 here-in-before but size of cable 2 x 6 sqmm complete along with cable 1x 4 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and as directed.

All as per item No 23.00 here-in-before but size of cable 2 x 4 sqmm complete along with cable 1x 4 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and as directed.

All as per item No 23.00 here-in-before but size of cable 2 x 2.5 sqmm complete along with cable 1x 1.5 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and as directed.

Attending complaints and checking electrical points for continuous electric supply system and rectification of defects including ceiling/ exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening, tapping of loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and petty work complete on all working days including holidays all as directed by Engr-in-Charge for Kashmir House (E-in-C's branch) Area. Note: - (i) Contractors are advised to visit the sites before quoting their rates. (ii) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (iii) Contractor shall make arrangement and deploy his supervisor to carry out day to day complaints and tradesman will remain present in Kashmir House (E-in-C's branch) area from 0830Hrs to 1800 Hrs in working day . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account. (iv) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 8 hours. (v) The contractor shall make all arrangements for attending different type of complaints on day to day basis. Any major item required to be replaced with new one shall be measured and paid for separately as “supply only” under respective item of this schedule. (vi) Proper record (date wise) of complaints received and rectified by the contractor shall be maintained and be produced for verification at the time of payment.

Supply only against in repairs of switch piano flush type 6 Amp, SP, one way 230 volts AC complete all as specified and as directed.

Supply only in repairs of switch piano flush type 16 Amp, SP, one way 230 volts AC complete all as specified and as directed.

Supply only in repairs of piano flush type socket out let 5 pin 6 Amp, 230 volts AC complete all as specified and as directed.

Supply only in repairs of piano flush type socket out let 6 pin 16 Amp, 230 volts AC complete all as specified and as directed.

Supply only in repairs of piano type electronic fan regulator suitable for 1200/1400 mm ceiling fan complete all as specified and as directed.

Supply only in repairs of bell push switch piano flush type 6 Amps, SP, 230 Volts AC complete all as specified and as directed.

Supply only in repairs of switch socket combination piano flush type 5 pin, 6 Amps, 230 volts AC complete all as specified and as directed.

Supply only in repairs of switch socket combination piano flush type 6 pin, 16 Amps, 230 volts AC complete all as specified and as directed.

Supply only in replacement of call bell suitable for 230 volts AC complete all as specified and as directed.

Supply only in repairs of cordless bell electronic type 230 volts AC complete all as specified and as directed.

Supply only in repairs of Plug Top 15 Amps, 230volts AC, 3-pin complete all as specified and as directed.

Supply only in repairs of Plug Top 5 Amps, 230volts AC, 3-pin complete all as specified and as directed.

Supply only in repairs flexible copper conductor twisted twin core PVC insulated cable of size 23/0.0076 complete all as specified and as directed.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 4 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and as directed.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and as directed.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and as directed.

Supply only in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 12 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified and as directed.

Supply only in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified and as directed.

Supply only in replacement of MCCB TP 125 Amp, 25kA thermal type complete all as specified and as directed.

Supply only in replacement of MCCB TP 160 Amp, 25kA thermal type complete all as specified and as directed.

Supply only in replacement of MCB SP 10-32 Amp, 10kA complete all as specified and as directed.

Supply only in replacement of MCB SP 40-63 Amp, 10kA complete all as specified and as directed.

Supply only in replacement of MCB SPN 20-32 Amp, 10kA complete all as specified and as directed.

Supply only in replacement of MCB SPN 40-63 Amp, 10kA complete all as specified and as directed.

Supply only in replacement of MCB TP 40-63 Amp, 10kA complete all as specified and as directed.

Supply only in replacement of MCB TPN 40-63 Amp, 10kA complete all as specified and as directed.

Supply only in replacement of metal clad AC box complete with MCB 20 Amp, 230 volts AC complete all as specified and as directed.

Supply only in replacement of metal clad socket outlet 20 Amps, 230 volts AC complete all as specified and as directed.

Supply only against in repairs of T8 type retro fit LED tube light 20 watts, 220 volts AC complete all as specified and as directed. Make: product Code LTT8-20 of crompton or equivalent from approved list of makes and as approved by GE

Supply only in replacement LED tube light fitting 1x 10 watts, 220 volts AC decorative box type complete with driver, bi-pin holders & including 10 watts retro fit type LED tube light including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply only in repairs of T8 type retro fit LED tube light 10 watts, 220 volts AC complete all as specified and as directed.

Supply only in repairs LED lamp candle type 3 watt 230 volts complete all as specified and as directed.

Supply only in repairs of decorative laminated sheet 3 mm thick of size 8"x 12" including necessary cutting of sheet for fixing switch/ socket complete all as specified and as directed.

Supply only in repairs of decorative laminated sheet 3 mm thick of size 8"x 5" including necessary cutting of sheet for fixing switch/ socket complete all as specified and as directed.

Supply only in repairs opf decorative laminated sheet 3 mm thick of size 7"x 4" including necessary cutting of sheet for fixing switch/ socket complete all as specified and as directed.

Supply only in repairs of decorative laminated sheet 3 mm thick of size 4"x 4" including necessary cutting of sheet for fixing switch/ socket complete all as specified and as directed.

Taking down ceiling fan/ exhaust fan of any sweep and any make, dismantling of blades, transportation to work shop for carrying out rewinding work, transportation back to site, reinstallation/refixing/hanging in position after complete repairs as required and making functional including testing complete all as specified and directed. Note:- Rewinding shall be measured and paid for under respective item of this Schedule.

M&L for rewinding of ceiling fan 1200 mm sweep, by dismantling of fan motor, cutting and removing burnt windings, cleaning, winding with super enameled copper wire of superior quality, thickness as per existing gauge and number of wire turns as per existing winding, provision of insulation paper, applying varnish, drying varnish and re-assembling of fan including replacement of gun metal bush & ball bearing where ever required complete all as specified and directed. Note:- cost of gun metal bush and bearing included in this item.

M&L for rewinding of ceiling fan 1400 mm sweep, by dismantling of fan motor, cutting and removing burnt windings, cleaning, winding with super enameled copper wire of superior quality, thickness as per existing gauge and number of wire turns as per existing winding, provision of insulation paper, applying varnish, drying varnish and re-assembling of fan including replacement of gun metal bush & ball bearing where ever required complete all as specified and directed. Note:- cost of gun metal bush and bearing included in this item.

M&L for rewinding of exhaust fan/cabin/wall fan 230/300 mm sweep, by dismantling of fan motor, cutting and removing burnt windings, cleaning, winding with super enameled copper wire of superior quality, thickness as per existing gauge and number of wire turns as per existing winding, provn of insulation paper, applying varnish, drying varnish and re-assembling of fan including replacement of gun metal bush & ball bearing where ever required complete as specified and directed. Note:- cost of gun metal bush and bearing included in this item.

Supply only in repairs of fan capacitor 2.5 Mfd complete all as specified and as directed.

Supply only in repairs of fan capacitor 3.15 Mfd complete all as specified and as directed.

Supply only in repairs of fan capacitor 4.0 Mfd complete all as specified and as directed.

Supply only in replacement steel ball bearing of suitable size & model (as per sample) for ceiling fan 1200/1400mm sweep complete all as specified and as directed.

Supply only in replacement gun metal bush for ceiling fan 1200/1400mm sweep complete all as specified and as directed.

Supply only in repairs of Steel screws for body cover and blades suitable for ceiling fan of any size complete all as specified and as directed.

Supply only in repairs of Mild steel 'U' clamps with rubber reel, bolts, nuts, washers and safety pin complete all as specified and as directed.

Supply only in repairs of Down rod 30 cm height fabricated out of MS pipe 12mm dia heavy duty duly painted with two coats of white synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed.

Supply only in repairs of Down rod 60 cm height fabricated out of MS pipe 12mm dia heavy duty duly painted with two coats of white synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete as specified and directed.

Supply only in repairs of PVC gang box 5/6 amp single way heavy duty complete all as specified and as directed.

Supply only in repairs of PVC gang box 5/6 amp 3/4 way heavy duty complete all as specified and as directed.

Supply only in repairs of PVC gang box 15 amp 4 ways heavy duty complete all as specified and as directed.

Supply only in repair of PVC 3 Modular gang box with Cover plate of suitable module complete all as specified and as directed.

Supply only in repair of PVC 4 Modular gang box with Cover plate of suitable module complete all as specified and as directed.

Supply only in repair of PVC 6 Modular gang box with Cover plate of suitable module complete all as specified and as directed.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 1.5 sqmm LT 1100 volt grade complete all as specified and as directed.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 2.5 sqmm LT 1100 volt grade complete all as specified and as directed.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 4.0 sqmm LT 1100 volt grade complete all as specified and as directed.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 6.0 sqmm LT 1100 volt grade complete all as specified and as directed.

Supply only FRLS PVC insulated unsheathed multi core stranded copper conductor Cable of size 2.5 sqmm, 3Core LT 1100 volt grade complete all as specified and as directed.

Supply only in repairs of casing and caping size 20mm inclusive of all accessories as specified.

M&L for re-fixing the conduit/casing and caping of any size fixed on wall/Ceiling with proper saddles/clamps/Nails including making good disturbed surfaces complete all as specified and as directed.

Supply and fixing in replacement of motor for ventilating fans AC single phase 230/240 V of size 230 mm sweep metal body complete all as specified and as directed.

Supply and fixing in replacement of motor for ventilating fans AC single phase 230/240 V of size 300 mm sweep metal body complete all as specified and as directed.

Supply and fixing in replacement heavy duty motor for exhaust fans AC single phase 230/240 V of size 300/380 mm sweep 900 rpm metal body complete all as specified and as directed.

Supply & fixing in replacement of motor for wall mounted fan 380 mm sweep AC single phase 230/240 V complete all as specified and as directed.

M&L for laying of XLPE PVC sheathed armored cable 16 sqmm 4 core complete all as specified and as directed.

M&L for Earthling complete with galvanised steel earth plate electrode, 600x600x6mm thick, buried directly in ground vertically to depth not less than 1.5 meters below normal ground level, connected to galvanised iron earthing strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type C-1, 80mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced earth plate surrounded by alternate layers of packed charcoal, salt oacked which shall not be less than 15cm in all side of earth plate complete all as shown in electrical plate No 3 of MES schedule Part-I complete all as specified and as directed.

Supply only in replacement 0.5 W LED coloured Adore Lamp B22 Green suitable for bulb holder in engage lights. Complete all as specified and as directed by Engr-in-Charge. Make-Havells LHLDAFUEUONX0X5 or equivalent from approved list of makes and as approved by GE

Supply only in replacement 0.5 W LED coloured Adore Lamp B22 Red suitable for bulb holder in engagement lights. Complete all as specified and as directed by Engr-in-Charge. Make-Havells LHLDAFUEUPNX0X6 or equivalent from approved list of makes and as approved by GE

Supply only in replacement 2.8 W LED coloured Adore Lamp E14 WW (Warm White) Candle lamp suitable for bulb holder in engagement lights. Complete all as specified and as directed by Engr-in-Charge. Make-Havells LHLDEUOCMC8R2X8 or equivalent from approved list of makes and as approved by GE

Supply only in replacement 9 W LED Adore Lamp E27 WW (Warm White) 3 star lamp suitable for bulb holder in engagement lights. Complete all as specified and as directed by Engr-in-Charge. Make-Havells LHLDEUOCMC8R2X8 or equivalent from approved list of makes and as approved by GE

M&L in replacement for fixing of LED Picture lights 12W for photo frame in warm white colour in Aluminum body gold finish along with all accessories necessary to mount the lights. Make- Philips Model-31403 or equivalent from approved list of makes and as approved by GE

M&L in replacement of wall light decorative type in matte chrome colour with material glass, metal including lamp wattage base Tornado E27, 24 W capacity. Complete all as specified and directed as per Engrin-Charge. Make- Model No 36062/17 (QWG305) of Havells or equivalent from approved list of makes and as approved by GE

M&L in replacement of mirror light decorative type in two distinct elements can white colour body and warm white colour including lamp wattage Candle E14, 40 Wx 2 capacity in 3 layered glass. Complete all as specified and directed as per Engrin-Charge. Make- Model No 34006 (QWZ802) of Havells or equivalent from approved list of makes and as approved by GE

M&L in replacement LED inverter based 18 watt light batten fitting complete with accessories made of aluminum housing having minimum system efficiency 100 lm/watt operating at full load at AC supply & minimum 10 watt during battery back up , power factor is equal to or greater 95, CCT 6500K, CRI -80, IP-20, inbuilt Li-ion battery for backup, back up to 4 Hrs for complete tube light (partial back up not allowed), LM-79 & 80 complete all as specified and directed. Make-Halonix HLB-08-10-CW-INV or equivalent from approved list of makes and as approved by GE. Note: Two year warranty shall be provided by the manufacturer from the date of supply

M&L in replacement LED inverter based 45 watt building security(street light) fitting complete with accessories made of aluminum housing having minimum system efficiency 100 lm/watt operating at full load at AC supply & minimum 20 watt during battery backup , power factor is equal to or greater 95, CCT 6500K, CRI -80, IP-20, inbuilt Li-ion battery for backup, back up to 4 Hrs for complete tube light (partial back up not allowed), LM-79 & 80 complete all as specified and directed. Make-Halonix HLSLD-ML04-45CWL-INV, Havells. Note: Two year warranty shall be provided by the manufacturer from the date of supply

M&L in replacement ceiling secure light 14 W downlighter cool white complete with all accessories and all as directed by Engr-in-Charge

M&L in replacement spot light 2W COB led as source warm white colour along with all cutting & making good work complete all as specified and as directed.

Supply and fix in replacement IP 40 Sendzimir Hot dipped Galvanized feeder trunking system cable tray 50mm (h) x 400 mm (w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray system, along with vertical bends, bends. Make- Legrand Cat Part No- CF54/50 (000208)/ABB Model No- 07 136 or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement CABLOFIL wire meshed stainless steel (SS304) cable tray 54mm (h) x 600 mm (w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray system, along with vertical bends, bends. Make- Legrand Cat Part No- CF54/100(000078) or equivalent from approved list of makes and as approved by GE

Supply and fix in replacement IP 40 Sendzimir Hot dipped Galvanized feeder trunking system cable tray 50mm (h) x 200 mm (w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray system, along with vertical bends, bends. Make- Legrand Cat Part No- CF54/200 (000098)/ABB Model No- 06 334 or equivalent from approved list of makes and as approved by GE

Supply & fix in replacement cover SS with zinc coating for mounting and covering cables on cable tray width 400 mm along with clips SS Complete with all mounting and supporting accessories complete all as specified and as directed.

Supply & fix in replacement cover SS with zinc coating for mounting and covering cables on cable tray width 600 mm along with clips SS Complete with all mounting and supporting accessories complete all as specified and as directed.

Supply & fix in replacement cover SS with zinc coating for mounting and covering cables on cable tray width 200 mm along with clips SS Complete with all mounting and supporting accessories complete all as specified and as directed.

Supply & fix in replacement SNAP On trunking system UPVC material 50mm x 105 mm for surface/wall mounting along with complete connected accessories along with internal variable Cat No 0756 22, external variable angle 0756 32 & flat angle cat No 0756 42 suitable for mounting switches & sockets along with top cover complete all as specified and as directed by Engr-in-Charge. Make- Legrand/ ABB or equivalent from approved list of makes and as approved by GE

M/S ANIL KUMAR

SANJEEV ENTERPRISES