Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹13.1 Cr
EMD Value
₹15 L
Closing Date
24 Jul 2025, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Gulbarga Electricity Supply Company Limited
Thippanna
a) Construction of sub division office building at Bidar, Aurad (B), Bhalki, Basavaklyan, Chitaguppa, (05 Nos) b) Construction of section office building at Bidar. (D6 & D7), Chimkod, Wodgoan (04 Nos)
GESCOM/2025-26/BD/WORK_INDENT216/CALL-2
GESCOM/2025-26/BD/WORK_INDENT216/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
GESCOM Chief Engineer Operations Corporate Office Gulbarga
16 documents required · 16 mandatory
The bidder should have successfully completed at least one similar nature of work costing not less than the 50% of amount of work put to tender, during any one year of the preceding five financial years in any of the Govt. / Public Sector/ Corporate undertakings. (2020-21, 2021-22, 2022-23, 2023-24, 2024-25).
The tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.18,23,832.00 (usually not less than 50% of the electrical works) in any one year.
The tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.12,67,505.00 (usually not less than 50% of the water supply sanitary engineering works) in any one year.
Quantities of work executed as prime contractor in the same name during the last five years specified below. i. Earthwork excavation :5137.00 cum ii. PCC/RCC:3229.00cum iii. TMT Steel:163.00 M Ton. iv. SSM/BBM:1042.00cum v. Plastering:12726.00sqm vi. Granite/vitrified flooring:3439.00sqm.
Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. (A)Existing commitments and on-going works: (B) Works for which Tenders already submitted:
The following items of equipment are considered essential for successfully carrying out the works. The tenderer should furnish all the information listed below. (i) Excavator.01 Nos (ii) Tipper 01 Nos (iii) Self-loading concrete mixer 01 No (v)Steel centering/scaffolding 2912sqm
Turnover: The bidder Should have achieved in at least two financial year a minimum financial turnover (in all classes of civil engineering construction works only) two times of contract the amount put to tender during the last preceding five years (2020-21, 2021-22, 2022-23, 2023-24, 2024-25).
Liquid assets: The liquid assets and/or availability of credit Financials of no less than 30% of amount put to tender (Letter of credit/certificates from banks for meeting the fund requirement). In case of credit facility, a certificate issued by any nationalized Bank/scheduled Indian Bank is compulsory in the Annexure-6.
The bidder should process a valid class-I KPWD license issued by the Govt of Karnataka as on the date of submission of bid.
₹7,500
₹15 L
11 Jul 2025
11 Jul 2025
28 Jul 2025
21 Jul 2025
21 Jul 2025
a) Construction of sub division office building at Bidar, Aurad (B), Bhalki, Basavaklyan, Chitaguppa, (05 Nos) b) Construction of section office building at Bidar. (D6 & D7), Chimkod, Wodgoan (04 Nos)
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5...
Providing and laying in position Cement Concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...
Formwork for Footings Isolated @ 8percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.1a)
Providing and constructing Laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwark for Columns @ 70percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.9 )
Formwark for Plinth beams of Buildings @ 50percentage (Comman SR, Volume-1, Pg No. 29/ SI. No.2)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwark for Columns @ 70percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.7)
Formwark for Beams & Lintels of Building @ 60percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.14)
Formwark for Roof Slab of Building @ 50percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.15 ))
Formwark for Chejjas, Canopy & Other Architectural projections of minor sections @ 45percentage (Comman SR, Volume-1, Pg No. 111/ SI. No.19 )
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to ...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elasto...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes including cost of materials, labour, usage charges...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 sqm over an under coat of primer applied @ 0.80 L/10 sqm of approved brand and manufacture includ...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 sqm over an under coat of primer applied @0.75 L/10 sqm of approved brand and manufacture to give an e...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with paint ...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 sqm over and including one coat of...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing of Aluminium composite panel of approved make and
colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams
with necessary aluminium frame works at required level made...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work (Comman SR, Volume-3, Pg No. 17/ SI. No 3.1.)
Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...
Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading,...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on
prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Plain Cement Pavement Quality Cum0 grade Concrete (RMC) with OPC & GGBS laid without Paver Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/Cum and G...
Concealed Conduit System : Supplying heavy gauge PVC conduit pipe 19/20mm dia2.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running befor...
Supplying heavy gauge PVC Conduit Pipe 19/20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cem...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.1
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.3
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Regulator PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.4
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6/16A Universal Socket PWD Ele. SR 2023-24, Pg. No. 9, It No. 3.6.10
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phas...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.5...
Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Earthing : Supplying fixing wiring earth electrod for grounding conduits IC cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5mtrs long burried in pit. Around the pi...
Supplying of 1.1 Kv LT UG cable XLPE or heat resistance PVC Insulated PVC Extruded inner sheath armoured UG LT csble as per IS-1554( part-1) escom. SR 2023-24, Pg. No. 13 , It No. 32.11
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...
Supplying of 1X4-20/22 w feet -PVC Batten with integrated LED tube 18W with high quality diffuser with Life of 25000 burning hours & 70percentage lumen maintenance with CRI grater then 80. Power Input...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (Comman SR, Volume-2, Pg No. 127/ SI. No.13.59)
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingOval shape 45...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g:(Comman SR, Volume-2, Pg No. 137/ SI. No.14.40.2)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore (Comman SR, Volume-2, Pg No. 117/ SI. No.13.4.2)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy (Comman SR, Volume-2, Pg No. 139/ SI...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and fixing Unplasticised Polyvinyl Chloride (UPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500 mm x 700mm inter...
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, c...
Borewell depth of 50 to 100 Mtrs
Borewell depth of 100 to 150 Mtr
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary ...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments (Comman ...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Comman SR, Volume-5, Pg No. 154/ SI. No.13.25.1)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork for Foundation 8percentage of finised rate of concrete
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Formwork for Columns & piers 70percentage of finished rate of concrete
Formwork for Beams & Lintels 50percentage of finised rate of concrete
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ra...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
supplying and Placing in position Main table of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT.Its size shall be 1650mm Width x 900mm Depth x 740mm Height .Table top shall be 25...
Supplying and placing in position ERU of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT.Its size shall be 1550 Width x 450 Depth x 705 Height.The top of ERU shall be 25 mm thick pl...
Supplying and placing in position Back unit of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT with size of 1280 Width x 425 Depth x 705 Height. Top of HDU shall be 25 mm thick plai...
Supplying and placing in position Free Standing Pedestal with Castors of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT with Overall Dimensions shall be 390mm(W)x440mm(D)x646mm(H)....
Providing, supplying and placing of Mid Back Chair of Make GODREJ/FEATHERLITE/EQUIVALENT.
a) SEAT/BACK ASSEMBLY: The seat is made up of 1.5 plus or minus0.1cm. thick hot-pressedplywood and upholstere...
Providing & placing in position office table without CPU hanger of Make GODREJ/FEATHERLITE/EQUIVALENT. with overall size shall be 1200 Width mm x 600 Depth mm x 728 Height mm. Top shall be 18 mm thick...
Providing, supplying and placing of waiting chair of 3-seater with 2 arms of Make GODREJ/FEATHERLITE/ EQUIVALENT .SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 plus ...
Providing, supplying and placing of Visitor Chair of Make GODREJ/FEATHERLITE/EQUIVALENT. SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2 plus or minus0.1cm. thick hot-pressedplywood measured ...
Providing, supplying and placing of Computer Table of Make GODREJ/FEATHERLITE/EQUIVALENT. Table Top: 35 Kg. Shelf:15 Kg. Drawer: 5.0 Kg.
Overall Size (Width X Depth X Height): (+/-2) mm Length: 1200 m...
RECTA WORKSTATIONS - 1200 x 600 Providing and placing "UPBEAT"desk based
modular workstation with System ht - 1200mm.
PARTIAL SCREENS: Fabric T- mould, 19mm thk Screen of 450mm ht.,mounted on studs
Providing Steel Almirah of Godrej or any other Equivalent make of size 198.1Cm X 91.6CM X48.6CM having with four adjustable shelves with a 3-way bolting device and a six lever lock for maximum securit...
Providing & injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top ...
1.23 Providing & Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour w...
Centering,shuttering for RCC Columns and Pedestal 70percentage Upto Plinth level (Rate=6601.35 X 70percentage)
Centering and shuttering for ground beam & plinth beam 50percentage (Rate=6601.35 X 50percentage)
Centering and shuttering for Vertical wall of Drain Septic sump 35percentage (Rate=6601.35 X 35percentage)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour...
Providing Half brick masonry with common burnt clay Non Modular bricksof class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1cement : 4 coarse sand) including cost of all materials,...
Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional co...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having ...
Painting with synthetic enamel paint of approved brand & manufacture to give an even shade :2 coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops & foreign m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(Com...
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...
Providing Honne wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisin...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing plain rolled glass 4mm thick with teakwood beading of 10mm thick (Common SR 2023-24 Item No. 20.107, Page No. 207 Vol-02)
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge (Common SR 2023-24 Item No. 20.107, Page No. 218 Vol-02) SS Handles ...
SS Aldrop 16mm dia, 300mm BR 375
SS Tower Bolts 250x10mm BR=200
SS hinges 125 mm BR-50
SS Door stopper 75mm.BR=100
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing & fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel w...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing & fixing Vertical Blinds of reputed make of shape 100mm regular fabric with powder coated aluminium channel, telting with PVC Chain system with all necessary fittings and fixtures as per dir...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...
UG Sump Tanks Providing & Applying Crystalline waterproofing slurry coat RCC structure like Retaining wall, Underground tank. The material having chemical resistance properties, seals shrinkage cracks...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing & fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm to give an even ...
Providing and supplying aluminium extruded tubular and other alu minium sections as per the architectural drawings and approved draw ings of Chief Architect, GoK.The aluminium quality shall be as per ...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specifi...
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on ...
Providing and fixing in wall lining flat pressed three layer (medium den sity) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, T...
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Concealed Conduit System:Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Concealed Conduit System:Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Concealed Conduit System:Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(P No 2 Item no 1.4.1 ,1.4.2,)...
Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.(P No 2 Item no 1.4.1 ,1.4.2,)...
Supplying & fixing PVC/metal conduit Deep junction box (Pg 2/3 Item No 1.5.1,1.5.2,) 19/20 mm deep Junction box
Supplying & fixing PVC/metal conduit Deep junction box (Pg 2/3 Item No 1.5.1,1.5.2,) 25 mm deep Junction box
Supplying & fixing PVC/metal conduit Deep junction box (Pg 2/3 Item No 1.5.1,1.5.2,) 32 mm deep Junction box
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete (Pno 3 Item No 1.7.1/1.7.2 u...
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete (Pno 3 Item No 1.7.1/1.7.2up...
supplying & fixing MS fan box with round Hook(Pg 4 Item 1.13)
Supply & laying of under floor junction boxes shall be of three-piece construction - Base box, frame and load plate. Base box shall be robust in its construction manufactured from 1.5 mm thic...
supplying and wiring adopting loop system in existing PVC conduit /casing caping using 2x1.5 sq mm ( phase & nuetral ) 1x1.0 sq mm ( Earth wire ) FRLS multi strand PVC isulated copper wire ( confi...
Medium point above 3Mtr upto 6Mt from tapping point to outlet via switch box
Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified I...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring usin...
Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including n...
Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including n...
Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including n...
Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including n...
Supplying and fixing Powder coated/galvanised metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall, including n...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., comp...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., comp...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., comp...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., comp...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., comp...
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6A one way switch Item no-3.6.1
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6 A two way switch Item no-3.6.2
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6 A three way socket Item no-3.6.3
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) steped fan regulater Two module Item no-3.6.4
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 16 A one way switch Item no-3.6.7
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6 A bell push Item no-3.6.8
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 32 A DP Switch Item no-3.6.9
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) 6/16 universal socket Item no-3.6.10
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) TV/telephone socket Item no-3.6.11
Supplying and fixing of modular switch & connected accessories onexisting modular switch plate as per IS 3854 and IS 1293.) ( Pg no 9) RJ 45/1.0 outlet cat 6 Item no-3.6.12
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Bakelite ceiling rose Item-3.14.5
upplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Pendent holder Item-3.14.6
upplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Batten holder Item-3.14.7
upplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.)( Pno 10 Item No 3.14.5/3.14.6/3.14.7/3.14.8) 6A Bell buzzer Item-3.14.9
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single pha...
Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single pha...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentag...
Supplying, fixing and wiring rotary selector switch suitable for fvoltmeter ( Pno 19 Item no 5.28
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C confirming IEC 60898 ( Pno 19 Item no 5.38
Supplying 100 A 4X 30X 6mm allimiuim strips rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleev...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided wit...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300 mm)P-30 Item 6.2.1
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 & wit...
Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply.(Pno-30 Item no-6.5.2)400 mm Sweep
Supplying of .. TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cool...
Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C ( Pno 32 ...
Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spik...
Supplying and drawing UTP-CAT 6E LAN cable. (Pg no-36, Item no8.1)
Supplying and drawing PVC flexible one pair telephone narmoured tinned copper cable 20 piar ( Pno 36 Item No 8.2.7)
Supplying & Fixing of switch mounting rack with power manager & cable manager 4U with 450 mm depth ( P no 36 Item No 8.4.1
supplying & fixing of 1/0 socket with box ) Pno 36 Item 8.10.1
1.1 KV XLPE heat resistent PVC insulated inner sheet armoured LTUG cable as per IS -1554 ( part 1or IS 7038 part-1 armouring strip thickness and resistivity as per IS 3975 70 sq mm 3.5 core 18 GI str...
Supplying,erecting,testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete Excluding batteries and wiring complete.3 kVA OFF LIN...
Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries (pg no-38 Item no-9.5.10.For 200AH capacity Qty as UPS
supplying ... feet PVC batten with integrated LED tube ... W with high quality diffuser with Life of 25000 burning hours & 70percentage lumen maintenance with CRI grater then ...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with wh...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare cl...
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling ...
Supplying and Fixing ofUsing 32mm dia G.I.Pip mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to G...
Supplying,fixing & wiring 3-Phase Digital Ammeter/voltmeter (P No 19 Item No 5.29)
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing & technical specifications, including setting out, shoring, strutting, barricading, caution lights, ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia pipes, having thermal stability for hot & cold water supply, including all CPVC lain & brass threaded fittings, i/c fixing ...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 Common SR 2023-24 Item No. 13.12, Page No. 119 Vol-02)
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 g...
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber 100mm x 100mm size P type with Non Modular common burnt clay bricks of designation 3.5& wa...
Constructing brick masonry chamber for underground C.I. inspection chamber & bends with bricks in CM 1:4 (1cem: 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions,total w...
Providing & fixing PVC (S.W.R) S Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete (Common SR 2023-24 Item 13.62, Page-127 Vol-02)
Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete (Common SR 2023-24 Item No. 13.63, Page No. 128 ...
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually c...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
14.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (Common SR 2023-24 Item No. 14.8, Page No. 132 Vol-02)
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (Common ...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Item no-14.28.2.1 pg no-136 For 32mm ida
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular...
Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy (Common SR 2023-24 Item No. 1...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 percentage) total coated thickness with zinc coat...
Providing & fixing MS casing collars as per IS 1239 (part-II)1982 with all latest amendments for any dia.The thicknes of plate used for covering 1 end shall be 3mm (min). The dimensions of caps & cola...
12.34 Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (mi...
10.1 Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at ...
13.4 Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per directions of engineer in...
Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments.3 HP, size 50x40 Head 30M, Discharge 198 LPM( Commo...
13.25 Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the sam...
13.26 Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
13.30 Supply & delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc with ISI mark
13.31 Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets.
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approve...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Applying priming coat: With ready mixed red oxide zinc chromateprimer of approved brand and manufacture on steel galvanised iron/steel works including preparing the surface after thorougly cleaning oi...
Clearing & grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings & trees girth up to 300 mm, removal of stumps of trees cut earlier & disposal of unserviceable materi...
Providing, supplying and placing of Mid Back Chair of Make GODREJ/FEATHERLITE/ EQUIVALENT..
a) SEAT ASSEMBLY: The seat is made up of 1.5plus or minus0.1 cm thick hot-pressed plywood upholstered with ...
Supplying and placing in position Main table of the following specifications of Make GODREJ/FEATHERLITE/EQUIVALENT .Its size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 2...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
eproc_formats(new) (2).xlsx
Others - Formats • 0.02 MB
section office plan.pdf
Design Document • 0.32 MB
KW-4 (1).doc
Tender Document • 1.87 MB
ift bidar circle call2.pdf
Instructions to Tenderers • 2.45 MB
Sub division office plan.pdf
Design Document • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .