SPECIAL REPAIRS TO BLDG NO 38 SM LINE (MD ACCN OFFR) AT KAMPTEE.

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, archy, pillars etc complete all as specified and directed.

Dismantling of asbestos cement/ transculent sheet corrugated/ semi-corrugated sheets in roof coverings including ridges complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (using old size brick) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed.

S&F structural rolled mild steel as in roof trusses (framed), purlins crane gantries, rail and fastenings and heavy brackets framing (beam, tee, angle, channel or flat section) and similar works complete confirming to Fe-410-O etc complete all as specified and directed.

Dismanttaling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20-25mm thick kota stone (machine cut) slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for kota stone slab 20-25mm thick including rubbing, mirror polishing in riser of steps, skirting, dado and pillar laid over backing coat of 10mm cement screed in CM 1:4 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, valley gutter fixed with self tapping screws complete all as specified and directed.

M&L for plain cement concrete type 1:2:4 B0 (using 12.50mm graded stone aggregate) as in coping, haunching rounded or chamfered on edges including necessary form work complete all as specified and directed.

Taking down cement or cement lime plaster, any desription on brick or stone wall, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick on brick or concrete surfaces in CM 1:6, surface finished fair & even complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:4, surface finished fair & even complete all as specified and directed.

M&L for rendering 5mm thick on brick or concrete surfaces of ceiling /chajja's in CM 1:3, surface finished fair & even complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel and iron of any description not exc 10cm width or girth not when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of exterior grade weather proof paint, water based, on wall surfaces complete all as specified and directed.

M&L for preparation of new surfaces of wall & applying two coats of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

S&F steel window with side hung shutters (glaze & gauze shutter) including projecting or box type hinges with steel handle peg stay and divided into square with glazing bars, dovetailed or welded to receive glazing or gauzing including one coat of primer including fixing of hold fast of size 25 x 5mm flat iron etc complete all as specified and directed.

All as per item No 22 above but without glazing bars complete all as specified and directed.

S&F framed guard bars with mild steel square bars with ends of bars shouldered and/ or riveted and similar work confirming to Fe 410-O or Fe 310-O complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodized aluminium windows and ventilator shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, locking arrangement etc complete all as specified and directed.

S&F for sheet glass 4.00mm thick, ordinary quality and glazing complete all as specified and directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

S&F flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides, 30mm thickness complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and avarage width of aperature 1.40mm complete all as specified and directed.

Taking up or down steel tubing and connection and S&F GI tubing 15mm bore, medium grade with all fittings and fixed to wall or laid in floors etc complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, insulation etc) or insulation board, slabs, blankets of any thickness including cover fillets complete all as specified and directed.

M&L for non-asbestos designer fiber cement building boards of size 595 x 595 x 4mm fixed or laid/inserted to GI frame work with screws/ clips as in ceiling laid flat or sloping complete all as specified and directed. Note:- GI frame work will be measured and paid for separately.

S&F GI framework for seamless ceiling of size 600mm x 600mm comprising of hot deep galvanized powder coated perimeter angle 0.43mm thick of size 24x24mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, main runner Tee section 0.4mm thick with height 38mm and cross approx 1200mm centre to centre with GI cleat and steel expansion fasterners, including drilling holes for 4mm dia GI wire suspender and clips etc complete as per manufacturer's recommendations complete all as specified and directed. Note:- (i) Ceiling baords shall be measured separately. (ii) The grid system shall be as per specification of make as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish out side MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in padding, copping using water proofing liquid compound as per manufacturer's instructions, laid to proper slope and gradient, finished even and fair complete all as specified and directed. Note:- Water proofing liquid compound shall be measured and paid separately.

M&L for provision of water proofing treatment by using APP torch on miniral/ slate finished membrrance over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane having non woven polyster film reinforcement with 3mm thick and weight not less than 3.00 kg/sqm and finished on top with mineral/ slate finished torch on system laid with 100mm & 150mm over lap on side & end laps resepectely laid over rendering 20mm thick in CM 1:3, finished even & smooth without using extra cement using water proofing liquid as per manufacturers instructions complete all as specified and directed. Note:- Water proofing liquid will be measured & paid separately.

Dismantling of floor, hearth or wall tiles including cement mortar bedding, but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over & including 15mm thick screed in CM 1:6 finished even and fair complete all as specified and as directed.

All as per item No 40 above but in skirting / dados including screed base plaster 10mm thick in CM 1:4 finished even and fair complete all as specified and directed.

M&L for glazed ceramic coloured tiles (300mm x 450mm) on vertical surface such as skirtings/ dados, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles and including 10mm thick backing coat in CM 1:4 finished even and fair complete all as specified and directed.

M&L for joint free non skid colour ceramic tiles 7 to 8mm thick, area of each tile not exceeding 0.11 Sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC type E2 1:5:10 (using 40mm graded stone aggreate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in sunken floor using WPC @ 200 ml/50Kg of cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for rendering 15mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and surface finished fair & smooth complete all as specified and directed.

Supply only liquid integral water proofing admixture of Make: Pidilite or its equivalent complete all as specified and directed.

M&L for two coats of brush bond liquid compound of Make: Fosroc (Fosroc chemical Ltd) or its equivalent water proofing coating over plastered surfaces of sunken portion complete all as per manufacturer instructions complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors, finished fair and even complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set, including screed bed or bedding layer 15mm thick in CM 1:4 finished even and smooth for laying floor finishes, jointed and pointed in neat cement slurry in floor with grey cement and no pigment complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in PCC flooring laid in slope in 1:30 in alternative bays exposed surfaces finished even and smooth using extra cement including racking out joints between pannel to pannel and pannel to wall and plugging the same with bituminous mastic using bitumen and mixure in 1:3 complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3.0mtr in length. Exposed surfaces finished even and smooth with using extra cement including racking out joints between pannel to pannel and pannel to wall and plugging the same with bituminous mastic using bitumen and mixure in 1:3 complete all as specified and directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drawing shown on SSR complete all as specified and directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for prepation of old decorated surfaces and applying two coats of exterior grade weather proof paint, water based on wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparation of old decorated surface of walls and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old decorated surface on ceiling and applying two coats of white wash complete all as specified and directed.

S&F 100mm long mild steel, medium weight, cold rolled butt hinges and fixed with screw/welded to frames etc complete all as specified and directed.

S&F 150mm extruded aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange (Make: Prayag Cat no-7280) complete all as specified and directed.

S&F in repair 15mm dia bib taps, cast copper alloy CP with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed completed all as specified and directed.

S&F in repair angle cock (Muse) (Make: Prayag Cat No 9310) complete all as specified and directed.

S&F in repair vitreous chine wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

M&L granite (of any type) tiles/slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in WHB, kitchen platform including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

S&F in repair cabinet mirror 400x500mm size (Make: Prayag cat No 554) complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.22,040.00]

M/s DS Khekde

SHUB CONSTRUTION

M/s Jagdish Staioners and General Stores

VIJ ASSOCIATES

M/s Rahul Traders

M/s B S Jain

Bidder Name

SHUB CONSTRUTION

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

VIJ ASSOCIATES

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani