Spl repair to certain Bldgs in Triveni Vihar of FD Hosp and Provn of bathroom and toilet of A Officer mess of 4 Inf Div and EMP Coy at Old Cantt Prayagraj.

Amount

Demolition of cement concrete of any description and in any position is reinforced (reinforcement cut as required to facilitate demolition) not other wise specifically provided for complete all as specified and directed.

M&L for Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole covers, slab etc. with plain fair faces, including chamfers, weathering, throat- ing etc. and setting in mortar 1:6 complete with joints to match all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with old size fly ash sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4complete all as specified and directed.

M&L for Brick work with old size fly ash sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 06 above but (Except brick).

Dismantling brick tiles any size laid bedded and pointed in any mortar over roof treatment including removal from site complete all as specified and directed.

Demolition of mud on roofs, any thickness and in any position and leaping over roof terrace, removing the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm grd stone agg) as in cement concrete in roof kerbs or mud stops, rounded or chamfered on edges finishing the surface fair & even complete all as specified and directed.

M&L for screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with water proofing compound (WPC to be measured and paid separately) as per manufacturer’s instructions, finished even & fair complete all as specified and directed

M&L Cleaning the sunken floor/roof surfaces, including taking down existing roof treatment of any type from roof slabs and cleaning of surfaces, by wire brushes, brooming, removing dust, including dismantling of floor, lime terracing as required and applying following:- (a) Bitumen primer confirming to IS-3384-1965 @ 0.50 kg per sq.m. (b) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS – 702-1998 for water proofing membrane. (c) Applying of APP water proofing membrane weight not less than 3 kg / sq.m over entire area with overlaps and sealed all as specified and directed. (d) Again applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg / sq.m over water proofing membrane. (e) Dusting dry sand @ 0.75 kg per sq.m over water proofing membrane.

M&L for Preparation of new surface of APP membrane and treating/applying two coat of heat resisting alluminium paint complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick ,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per item No. 15 above but as in vertical surfaces such as skirting/ dado over and including rendering layer 10 mm thick in CM (1:4)

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in coloured cement to match tiles over and including 10 mm thick rendering layer in CM (1:4) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Baroda green Marble flooring work 18 to 20 mm thick laid over and including 20mm screed bedding in cement mortar (1:4) (table rubbed and polished) incl steps, stairs, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture mixed with pigment to match complete all as specified and directed.

M&L for Baroda green marble slab 18- 20mm thick (in full length one piece) in riser of steps, stairs, skirting, dado and pillar laid over and incl 10mm thick plaster in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including rounded/half rounded edge and hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified and directed

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed

M&L for 25 mm thick cement concrete as in levelling course, roof padding etc 1:2:4 type B-0 (using 12.5 mm grd stone agg), finished surface even and rough complete all as specified and directed.

M&L for 1st quality non skid coloured ceramic Heavy duty Parking (ENDURA type) tiles, area of each tile n exc 0.11 Sqm, 10 mm thick, set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete, 1:3:6 type-C-2 (using 40mm graded stone aggregate) as in sub base for floors/ pavings etc complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls or ceiling etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work in CM in 1:4 mixed with water proofing compound (liquid) as per manufacturer instructions, finished surface even and fair complete all as specified and directed. NOTE: WPC shall be paid separately.

Supply only Liquid water proofing compound of approved make complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on Brick/ Conc surface, finished even and fair on internal surfaces of wall complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coat of weather proof paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment preparation of old plastered surface and applying two coat of weather proof paint on walls over a coat of primer including complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surface and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty including complete removal of existing treatment complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc complete all as specified and directed.

S&F 110mm PVC (SWR) bends with access door complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron including bolts & nuts, suitable for 100mm bore pipe complete all as specified and directed.

Al as per item No. 51 above but suitable for 75mm bore.

M&L for Cutting chases pinning in , making good to facing where reqd. and pointing in CM 1:3 to ends or edges of landing , steps, cills, sunshades, selves, lintels etc. and cutting chases for concealed for water tubing or concealed conduit wiring etc and making good, cutting n.exc 10cm girth complete all as specified & as directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified and directed.

M&L for refixing old steel tubing 15 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note : GI tubing obtained from item No. 54 above shall be used.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed

M&L for refixing old steel tubing 20 mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. Note : GI tubing obtained from item No. 57 above shall be used.

S&F in repair 15 mm dia bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed.

S&F in repair 15 mm dia angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valueless symphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair Sinks kitchen or laboratory with drainage board made of stainless steel sheet, 1.0mm thick, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair vitreous china wash hand basin with pedestal pattern white flat back size 550 x 400 mm (excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size) complete all as specified and directed

Supply only 15 mm bore central hole basin mixer with 450mm braided connection pipe (without popup), fancy type chromium plated screwed down, for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125 mm size with arms and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 500 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 with fittings, fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

All as per item No. 73 above but 40mm bore pipe

S&F in repair Kitchen rack plate made out of 1mm thick of stainless steel sheet of size 75 x 60cm complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

S&F in repair brass chromium plated Tumbler holder including brackets fixed to wall complete all as specified and directed.

S&F in repair SS soap dish as per sample kept in AGE's office or as approved by Engineer-in-charge complete all as specified and directed

Demolition of PCC of any description and in any position not specifically provided for complete all as specified and directed

M&L for Treatment to sunken floor and sides as mentioned here after:- (i) Remove existing treatment from sides and base slab and Cleaning of RCC surface by sand blasting using compressed air. (ii) application of one coat to sides and base of sunken with glass fibre reinforced acrylic modified cementanious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (iii) 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocreet plus as specified. (iv) applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base. Note: All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for Cement concrete (1:5:10), type E2 (using 40mm graded stone aggregate) as in filling in sunken part of slab complete all as specified and directed

S&F in repair 25 mm dia stainless steel curtain rod of 304 grade incl one pair of SS Bracket and stainless steel end cover for each rod cut to size and fixed in position complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame), area not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame), area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails or any other means complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made Solid PVC Moulded Door Shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, with Particle board core, supplying & fixing in the frame at site as per specification & sketch shown in section 8 of SSR part II complete all as specified and directed.

S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete all as specified and directed.

M&L for preparation of new steel primed surface and applying two coats of synthetic enamel paint over steel surface complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in bed block and filling in door frames and the likes complete all as specified and directed.

S&F 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 150mm stainless steel handles fabricated type complete all as specified and directed.

S&F 200mm stainless steel barrel tower bolts of fabricated type and fixed complete all as specified and directed. .

S&F 250mm stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one pink primer complete all as specified and directed.

S&F 100 mm long stainless steel hinges, complete all as specified and directed

M&L for MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Anodised aluminium frame for doors, windows, ventilators powder coated (Thickness or powder coating not less than 50 micron ) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Anodised aluminium window and ventilator shutters, powder coated (Thickness or powder coating not less than 50 micron) side hung type without sash bars using aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 No.), suitable handle (1 No.), tower bolt 100mm long (1 No.) complete all as specified and directed.

M&L for 4.8 mm thick plain sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 140mm Floor door stopper of stainless steel body and tongue, with hard drawn steel spring complete all as specified and directed.

S&F 300mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled MS Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E-250) quality A complete all as specified and directed.

M&L for Cutting holes into or through brick walls built in cement mortar superficial area n exc 150 sq cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S&F in repair 150 mm X 100 mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' and setting and jointing in cement mortar 1:1 complete all as specified and directed

S&F 20 mm thick coloured prelaminated PVC ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed

S&F continuous (piano) hinges, mild steel bright finish of width 30 mm complete all as specified and directed.

Excavation in trenches, in any type of soil n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete including sub base of under floors complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for Sand/ soil filling under floors or in foundations including watering and consolidation (Except Sand/soil) complete all as specified and directed. Note : Soil obtained from item No 117 above shall be used.

M&L for hard core broken stone of gauge not exceeding 63 mm, deposited spread and levelled in layers not exceeding 15 cm thick, levelling and rammed to a true surface complete all as specified & directed.

M&L for Use and waste form work in flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for Sand stone slab, 50mm thick, as in sun-shades, chajjas, shelves, cills, endings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete, complete all as specified and directed.

S&F Factory made solid panel PVC glazed/ gauged door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. supply & fixing in the frame at site as per specification and drawing, complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight extruded stainless steel hinge pin, bright complete all as specified and directed.

S&F 500 litters capacity white colour double layer(ISI Marked), rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed.

S&F 20 mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and as directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless symphonic action type low level flushing cistern and 32mm dia PVC Flush pipe, jointing to socket of flushing rim complete all as specified and as directed.

S&F 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and as directed.

S&F PVC connections 15mm size, of length 600mm, both ends having PTMT nuts, fixed, complete all as specified and directed.

S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore, complete all as specified and directed.

S&F vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket, waste coupling complete all as specified and directed

S&F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S&F 15 mm bore Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F Brass chromium plated shower rose with arm, 125 mm size and fixed to complete all as specified and directed.

S&F 15 mm bore stop valve fancy type chromium plated with long cup and shank (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets fixed to wall complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for 100 mm bore complete all as specified and directed.

M&L for 100 mm dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains of internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Surface excavation in any type of soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006, 80 mm thickness, M-40 Grade and with grey cement and pigment laid over and including 25mm thick sand cushing complete all as specified and directed.

M&L for 100 mm thick cement concrete, 1:3:6 type, C-2 (using 40mm graded stone aggregate) as in sub base for floors/ pavings etc complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping with its all accessories complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

All as per Item No. 153 above but for one bell/buzzer point controlled by one bell push single pole one way

All as per Item No. 153 above but for one light point controlled by two two-way switches.

All as per Item No. 153 above but for one 5 pin 5 Amp socket outlet point on an independent board with cables of size 2.50sqmm.

All as per Item No. 153 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch with cables of size 2.50sqmm.

All as per Item No. 153 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, two way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 5 pin 5/6 Amp, 230 volts, flush type complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F Socket outlet, 2 in 1, 6 pin 15/16 Amp, 230 volts, flush type complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings incl 9/10W LED bulb complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F bell push piano, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F ceiling fan regulator, electronic, rotary step type suitable for 1200/1400 mm sweep ceiling fan complete all as specified and directed.

S&F in repair sheet metal enclosure (DB) for MCB, double door type, single pole and neutral 8 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB Single Pole and neutral, 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'B' Curve complete all as specified and directed.

S&F 1 x 10W LED Mirror light fitting, LED 6000K, Decorative Indirect up-down light for mirror and as wall light application with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make:Crompton Cat Part No. CCS-102-10-65-SL-DP-NWH/ Philips Cat Part No. BN021 LED 125 6500 PSU GR/ Bajaj Cat Part No. BCLSB 10W WH.

S&F 1 x 10W LED Bulk head light fitting, LED 600 lumen, enclosed in polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make:Orient Cat Part No. L1 BHP-10C/ Bajaj Cat Part No. B1 BWP 10W LED/ Philips Cat Part No. BY300PLED31757PSUPCINS2.

S&F 1 x 18W LED wall mounted tube light fitting, LED 6000K, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp complete all as specified and directed. Make: Bajaj Cat Part No. BCLSB 18 W WH / Surya Cat part No. SLE BT 18W ARROW / Crompton Cat Part No. CCS-100-20-65HL2-DP-NWH.

S&F Decorative wall light fixture made up of Polycarbonate, suitable for B-22 base holder polycarbonate body, weather proof, LED light fitting fixture with co extruded polycarbonate body, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including 9/10 W LED bulb complete all as specified and directed. Make:HAVELLS CAT PART No. LHFOECE1TZ10014/ PHILIPS CAT PART No. 30575 COMET

S&F 36 Watt road lighting luminaire with unique peanut optics to ensure uniform distribution, higher spacing between poles and maintenance free system for city roads and Streets, 50% Energy Savings, IP66 Protection PC and FG Cover, High Impact Resistance complete including LED Lamps and all accessories including bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers and including connection with three core flexible copper wire of size 23/0.0076 from ceiling rose to existing junction box complete all as specified and directed. Make: Philips Cat Part No. BRPO46 LED36 CW MR S2 PSU GR / Bajaj Cat Part No. ENXT P 36L WH PO PC SD MT/ Cromption Cat Part No. LSTS-36-CDL-M

M & L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI earth wire 4mm dia by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete all as specified & directed.(Note- The cost of GI wire and protection pipe up to test point shall be included in above quoted rates.)

S&F sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area FRLS PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 20mm dia 'medium grade' PVC concealed conduits and fittings, including taking down existing sub main wiring complete all as specified and directed. NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire

Taking down carefully ceiling fan/ exhaust fan by disconnecting all electrical connection and refixing the same including electric connection wire 3 core 23/0.0076 copper conductor complete all as specified and directed.

Taking down carefully existing geyser by disconnecting all electrical connection and refixing the same including electric connection wire 3 core 23/0.0076 copper conductor complete all as specified and directed.

S&F two pin and earth plug and socket with 1 MCB single pole 20 to 32amps C series 10KA in sheet metal enclosure and connecting complete all as specified and directed.

Supply, laying, testing XLPE cable Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including making holes on wall and making good the disturbed surface complete all as specified and directed.

M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand up to 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.

Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed .

S&F in repair sheet metal enclosure (DB) for MCB, double door type, single pole and neutral 4 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB Single Pole and neutral, 40 to 63 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed.

S&F exhaust fan,300mm sweep PVC Body , single phase 240 Volts with all accessories including making hole on wall including electric connection with wire 3 core 23/0.0076 copper conductor complete all as specified and directed.

Supply, laying, testing XLPE cable Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed.

Supply and laying GI pipe light grade 40mm bore for cable protection including all fittings such as bend tee complete all as specified and directed.

M&L for laying in trenches GI pipe 25mm dia medium grade including all fittings and fixtures complete all as specified and directed.

M&L for laying in fixing on wall GI pipe 20mm dia medium grade including all fittings and fixtures complete all as specified and directed.

S&F 20mm dia ball brass valves, high pressure with polythene float and flynut complete, sctewed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Hi-Tech Constructions

vs construction

shweta constructions

Manavi Constructions & Suppliers

Sahaj Enterprises