PROVN OF TRAINING SHED IN PW DIV AREA FLY PROOFING IN JCOS ORS MD ACCN AT MALCOME LINE CONSTN OF IRON SHED AT BAFFLE RANGE AT PW DIV SPECIAL REAPIR TO BLDG NO 78 MALL ROAD AND PROVN OF CERTAIN MINOR WORK AT INFANTRY SCHOOL MHOW UNDER GE MIS MHOW

Amount

Surfaces excavation not exc 30 Cm and averaging 15 cm deep and getting out in soft / loose soil and removal from sitecomplete all as specified and as directed.

M & L for Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in Hard/dense soil.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, man-holes, pier holes, etc. getting out in soft/loose soil complete all as specified and as directed.

Material and labour for Hardcore of broken stone or boulders of gauge n exc. 63 mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for plain Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for (1:2:4) Type B2 (using 40mm graded stone aggregate) in posts (incl caps and bases) complete all as specified and as directed.

Material and labour for MS TMT bars 6 mm to 8 mm dia cut to length, bent to shape reqd incl cranking, bending and binding with MS wire n.exc 0.90 mm dia (annealed) for stirrups complete all as specified and as directed.

Material and labour for MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Reinforced Cement Concrete(Nominal mix) (1:2:4) Type B-1(using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and directed.

Material and labour for Formwork Rough finished surfaces of concrete to sides of concrete flat or Curved side of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as directed.

Material and labour for Reinforced Cement Concrete(Nominal mix) (1:2:4) Type B-1(using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts comlete all as specified and directed.

Material and labour for Formwork Rough finished surfaces of concrete to sides of concrete flat or Curved sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Material and labour for Reinforced Cement Concrete(Nominal mix) (1:2:4) Type B-1(using 20mm graded stone aggregate) as in Beams, cantilevers, bressumers, lintels over 1.5span complete all as specified and as directed.

Material and labour for Form work to sides and soffits of floor or roof beams, cantilevers, shelves, lintels for rough finished surfaces of concrete complete all as specified and as directed.

Material and labour Brickwork with fly ash brick with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed.

Removing excavated materials (soils) to a distanceexc. 250 m but n exc. 500 m and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Material and labour for moorum/red bajri filling in floor or paving laid in layers n.exc 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for 100 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in flooring surface as in sub base complete all as specified and as directed.

Material and labour for 75 mm thick PCC (1:3:6) mix type C2 using 40mm graded stone aggregate as in plinth protection and paving finishing cone surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for mild steel work(Tubular, square/rectangular hollow section) as in Purline, rafter and wind ties, cleat roof Trusses etc including securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete all as specified and as directed.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to GDE Fe410-W or E-250 complete all as specified and as directed.

Supply and Fixed for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-Charge. Note : Pre- painted galvalume aluminum zinc coating GI based profile pattern steel sheet should be TATA Blue scope colourbond XRW or equivalent approved by GE.

Supply and Fixed for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as in ridge and cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-Charge.

Material and labour for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

All as per item No - 27 but as in riser of steps, skirting over 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Material and labour for machine pressed precast (factory made) concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,and including laid over 80mm thick under interlocking paver block including spreading, watering and consolidation compacted dry sand and jointed with grey cement slurry and pigment and sides of paver blocks grouted complete all as specified and as directed.

M&L for two coat of cement base paint over a coat of Alkali resistant primer to newly plastered surfaces of wall incl preparation of surface complete all as specified and as directed.

Material and labour for sand cushioning under floors including spreading, watering and consolidation complete all as specified and directed.

M&L PCC 1:3:6, type C1 using 20mm graded stone aggregate as in sub base of floor complete all as specified and directed

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 as in frame work for sun shade, roof projection and vertical section etc. complete all as specified and directed.

Erection and fixing only rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed.

S & F framed work such as grills, gratings etc with ends of barsshouldered and/or reveted or gorget into KG spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways railings, framework of water tanks and similar work con-forming to FE-290. Gde-E-165 complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets 6mm thick in roof coverings complete all as specified and directed

S&F 0.50mm thick (total coated thickness) pre-colour, pre profiles(Mangalore pattern) Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions complete all as specified and directed.Note:- The pre-painted galvalume zinc GI based profile pattern steel should be TATA Blue scope colour brand XRW or equivalent.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc.fixed with L-type or screws J-type or cranked hook bolts Complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A

Demolition of Brickwork or stone/boulder masonry, built in Cement Mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6mmean radius built in cement mortar setting in CM (1:6). Complete all as specified and directed

Taking down cement plaster on brick or stone wall etc., including racking out joints, hacking for key, scrubbing down with water, etc complete

Material & Labour two coats of acrylic emulsion extenior paint (anti fungal painting-APEX or Equivalent) over a coat of acrylic amulsion primer including preparation of new concrete/plastered surface of any description all as specified and directed by Engr-in-Charge.

Material & Labour one coats of acrylic emulsion extenior paint (anti fungal painting-APEX or Equivalent) including preparation of old treated concrete/plastered surface of any description all as specified and directed by Engr-in-Charge.

Material & Labour for providing one coats of oil-bound distemper on old plastered surfaces including necessary preparation to surfaces complete all as specified and as directed

Taking down of chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames)

S&F powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F 4mm thick sheet glass,ordinary qauality and glazing with oil putty in square n exc 05 sqm in each pane

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Dismantling Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns pinhole 8mm thick semi perforated square edge tile having NRC (Noise Reduction coefficient) of 0.50 (minimum) Light reflectance of 85% (minimum). Non combustible as per BS: 476 (PART-4), fire performance as per BS : 476(PART 6 & 7 ), humidity reistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, in true horizontal level suspeded on interlocking metal powder coated T-Grid of hot dipped galvanized iron section on Silhouetter profile, rotary stitched double webbed white with 1 mm reveal profile (White/black), comprising of main-T runner of size 15 x 32mm of length 3000m, cross - T of size 15 x 32 mm of lenght 1200mm and secondary intermediate cross-T of size 15 x 32 mm of lenght 600mm to form grid module of size 600 x 600 mm, from ceiling using galvanized mild steel item, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 19 x 19mm of length 3000 mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall S.S. screws. The work shall carried out as per specifications, drawing and as per directions of the Engineer-in-Charge .

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

All as per item No.54 above but 30mm thick,factory made divded into squareswith plain chamfered or rounded,mitered and rebated sash bars any numbers and sizes of members of shutters specified in SSR, Part-I Section 8 clause 8.24(b)

S & F of 100mm long butt hinges medium weight cold rolled mild steel complete all as specified

S & F of 75mm long butt hinges medium weight cold rolled mild steel complete all as specified

S&F of 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F of 100 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F of 75mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified.

S&F of 150 mm size aluminium anodized handle complete all as specified

S&F of 100 mm size aluminium anodized handle complete all as specified

S & F of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified and as directed

M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

M&L for 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S & F of Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed by Engineer - in - Charge.

M & L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 using 20mm graded stone aggregate as required (superficial area n. exc 150 sq cm) all as specified and directed by Engineer - in - Charge

M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete.

Supply and laying of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core. complete all as specified and directe

Supply laying and jointing of GI pipe 'light grade' 40 mm bore in trenches/under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Supply and laying brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.

M & L for Point in repairs wiring with PVC insulated FR LS PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area for phase/neutral drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching the disturbed surface of wall with existing surface wall & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes with bakelite sheet for mounting switches, sockets, fan regulators etc for the following :-

(a) One light point/fan point /Bell point controlled by one switch

(b) One 5amps socket out let point controlled by one switch on same board with other switches.

(c) One 5amps socket out let point on independent board controlled by one switch.

All as per item No-73 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F in repairs of piano flush button single pole one way 5 Amp 240 volt complete as directed.

S&F in repairs of socket outlet flush type 5 pin, 5 amps, 230 volts complete all as directed.

S&F in repairs of Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal, 230 volts complete all as directed.

S&F in repairs of switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S&F in repairs of socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

Supply and fix in repairs of Ceiling rose surface bakelite 63.5mm dia three terminal complete.

Supply and fix in repairs of Bell, ding dong type, AC 230 Volts,single pole complete.

S&F in repair of decorative gate light made up of high grade unbreakable polycarbonate material suitable for and including 10 W LED bulb with B22 base, mounted on existing GI pipe, with electric connection and all necessary fixing accessories including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHFHASE1TL4K015 or equivalent in Bajaj, Crompton

Supply and fixing in repair of Exhaust fan 300mm sweep, AC single phase 230 Volts, metallic type, 900 RPM complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engr-in-Charge.

S & F in repairs of MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs including taking down the existing complete all as specified and directed by Engr-in-Charge.

S&F in repairs of MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs including taking down the existing complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs of double door SPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs of Modular Bell push flush type,6 Amps complete with Modular Plates & Modular Boxes all as specified and directed by Engr-in-Charge..

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer om steel surfaces including prepration of new steel surface of any description over 10cm girth or width complete all as specified and directed.

BHATIA ASSOCIATES

M/S Sunshine Construction

Chitragupta Construction

KAILASH CHANDRA KHANDELWAL

SATHI ENTERPRISES

M/S UnitedConstruction

APconstruction

M/s Narendra kumar Agrawal