Repairing and Painting work of Hathni Police Station at BSPS, Surangani

Amount

“Repairing and Painting work of Hathni Police Station at BSPS, Surangani”

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 Metres lead: Un-reinforced cement concrete upto 15cm. thickness.

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. 50% spade work % 50% pick work.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in: Foundation and plinth.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for in situ-reinforced concrete & plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc. upto 200mm In thickness.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: Foundation footings bases of columns and the like and mass concrete.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending and placing in position complete upto floor two level: Tor steel

Stone filling behind retaining walls :

Brick work using common burnt clay building bricks in foundation and plinth in :-Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks.

Brick work using common burnt clay building bricks in super structure above plinth level in :-Cement Mortar 1:4 (1 Cement : 4 Sand)- Second Class Bricks.

Half brick masonry in common burnt clay building bricks in :-Cement Mortar 1:4 (1 cement:4 sand) in super-structure above plinth level upto floor two level :Second Class Bricks.

6mm Cement plaster to ceiling In Cement mortar 1:3(1 Cement:3 Sand)

10mm cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement mortar 1:4 (1 cement:4 sand).

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:4 (1Cement:4 Sand).

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping With enamel paint other than white.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. White tiles.

Providing and fixing ply wood lining with butt jointing and nails (frame work and coner fillets to be measured and paid for separately): 6 mm thick.

Narain Singh Thakur

arya shakti security and construction pvt ltd