Provn of LED lights, servo stabilizer and allied works for 367 TRU at AF Stn Bihta under GE (AF) Bihta.

Amount

Material and labour for point wring ,using approved colour coding (Phase-red,Neutral-black,Earth-green) complete with FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and as directed . (a) One light/fan/exhaust fan point controlled by 1 No,one way 5/6 Amp switch.

(b) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on same board along with other switches ,fan regulator etc.

(c) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on independent board.

S&F switch piano flush button single pole one way 6 Amp, 240 Volts conforming to IS 3854 ISI marked complete all as specified and as directed .

S&F for socket outlet, 5 Pin, 6 Amp flush type conforming to IS 1293 ISI marked complete all as specified and as directed .

S & F ceiling rose, surface Bakelite,isolated body three terminals complete all as specified and as directed .

Material and labour for point wring ,using approved colour coding (Phase-red,Neutral-black,Earth-green) complete for one socket outlet 15 Amp on independent board with FRLS PVC insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamle paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed .

S&F switch piano flush button single pole one way 15 Amp, 240 Volts conforming to IS 3854 ISI marked complete all as specified and as directed .

S&F for socket outlet, 3 Pin, 15 Amp flush type conforming to IS 1293 ISI marked complete all as specified and as directed .

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and complete all as specified and as directed Make: Havells/Bajaj/Usha/Crompton/Khaitan

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and complete all as specified and as directed Make:- Usha/Havells/Cromton/Orient/Bajaj

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and complete all as specified and as directed. Make:- Havells/Crompton/Bajaj/Wipro/Philips

Supply and fix sheet metal enclosure with socket plug top and MCB single pole neutral enclosure with two pin and earth plug and socket complete 240 Volt 20 to 32 Amps MCB SP complete all as specified and as directed by Engineer-in-Charge Make:- Havells/CG/Bajaj/Philips

S & F sub main wiring using approved colour coding (Phase-red,Neutral-black,Earth-green) complete with two single core FRLS PVC insulated and unshealthed stranded copper conductor cable 4 sqmm as current carrying conductor and one run of 4.0 sqmm as neutral cable ,voltage rating 1100 volt ,ISI marked drawn in and including concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with stranded accessories along with one run of FRLS PVC green colour insulated,unshealthed,stranded copper conductor of size 4 sqmm all as specified and as directed Make:- Havells/Plaza/Grandly/RR Kable/Universal/Finolex/ Polycab Note: Two run of single core FRLS PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.

S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 voltwith 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and as directed. Make:- Havells/L&T/Legrand/Siemens

S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 4 ways 220 voltwith 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and as directed. Make:- Havells/L&T/ Legrand/Siemens

S&F MCB’s single pole, 10 KA ,6 Amp to 40 Amp 240 Volts,and of ''B'' series with required wiring connections and lugs etc and erecting in provided enclouser/destribution board.MCBs shall be of current limiting type ,ISI marked conforming to IS 8828-1996 complete all as specified and as directed. Make:- Havells/L&T/Legrand/Siemens

S&F MCB’s single pole and neutal, 10 KA ,32 Amp to 40 Amp 240 Volts,and of ''B'' series with required wiring connections and lugs etc and erecting in provided enclouser/destribution board.MCBs shall be of current limiting type ,ISI marked conforming to IS 8828-1996,including taking down old one complete all as specified and as directed. Make:- Havells/L&T/Legrand/Siemens

M&L for Earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 20 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel of size 600x600x6 mm, supplying and laying charcoal stone aggregate) chamber and mild steel angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in drawing

S&F 150 KVA Servocontrolled voltage stablizer (unbalanced type) 3 phase 50 HZ oil cooled copper wound indoor type, out put voltage range 415 +/- 1 % ( phase to phase)240 Volt +/- 1%(phase to Neutral) and all necessary connections for installation properly with L2 switches over load/short circuit protection, High/low voltage cut off, bypass arrangement in case of emergency single phase sequence change protections with first filling of transformer oil and complete all as specified and directed by engineer-in-charge.Make-Volina/AE/Winitech/Brent Ford/ITE Gurgaon

S&F 150 KVA Isolation transformer oil cooled three phase copper wound indoor type having ratio 1:1 for input and output 240 Volt+-2.5% and 50 Hz with plug top and with first filling of transformer oil of requisite dielectric strength upto level, efficiency, more than 95%, separate neutral bushing shall be brought out for earthing potential difference between neutral to earth less than one volt with all standard fitting like digital temperature meter, adequate number of cooling radiators, lifting hooks one set, earthing terminal two nos complete with over load/ short circuit protection, connections for installation properly with L2 switches and complete all as specified and directed by engineer-in-charge. Make:-ABB/Siemens/GE Power/ITE Gurgaon/Schneider/ CG

Supply, install, testing and commissioning of out door type cubical feeder pillar Box TPN of size 600x600x300mm Aluminium bus bar 200 Amps, outer shell made out of 3.15 mm thick MS sheet inner shell made out of 2.00mm thicK MS sheet and MS angle section 40x40x6 mm on PCC 1:2:4 type B-1 platform 60cm above the ground level and 30 cm below the ground level, frame factory fabricated with front and back openable double door system complete suitable for 3 phase 4 wire 415 Volt, 50 Hz. The bus bar shall be provided with sufficient holes for distribution of LT supply and making necessary distributions with the help of thimbles etc complete all as specified and as directed.

S&F MCCB TPN, 125 Amp,25 KA, 415 Volts,and of ''C'' series with required wiring connections and copper lugs etc and erecting in feeder pillar and complete all as specified and as directed. Make:- Havells/Legrand/L&T/AE

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core including necessary laying/fixing arrangement alonwith trench ,walls,floors with suitable clampsand fasteners and all as specified and as directed. Make:- Havells/Universal/RPG (Asian/Finolex/Grandly

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable / erection of poles, stays etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as specified.

M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified.

M&L for sand cushioning for cable with river washed sand and pinning to provide required cover as per SSR Part –I complete.

Supply,Laying & testing of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of 16 sqmm 4 core, laid in trenches, ducts, encased in GI pipes, fixed to pole/wall, laid under rode, path, drains, culverts, fixed bare including jointing testing including all necessary electrical connection with suitable size of AI lugs/gland as required and complete all as specified and as directed

SHIV SHAKTI TRADERS

B.K. ROY & SONS