Construction of Building for Medavakkam Fire and Rescue Service Station at Chennai South District

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 m.

b. 2 to 3 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 m.

b. 2 to 3 mt.

2.2) Sand Gravel Mix

2.6) Supply and filling of 40 mm HBSJ

2.7) Supply and filling of 20 mm HBSJ

7.2)Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) Supplying and fixing of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

39) M.S Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of chromium plated 8 guage Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

55.2) Supplying and fixing of approved brand Porcelain Flat Back urinal superior variety

Electrical arrangements 72) Box type Fibre Fan hook

74) Charges for fixing of "Fan"

76) 8 SWG wire

78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

2.1.1) Filling C.S. sand

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.1) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor

b. In First Floor

c. In Second Floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor/Stilt floor

c. In First Floor

11.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

12.1.2) Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick a. In Stilt /Ground Floor

b. In First Floor

14.3.1) Precast Cupboard slab 20 mm tk.using standardised concrete mix M30 a. In Stilt / Ground Floor

b. In First floor

14.3.II)Precast cupboard slab 40 mm tkusing standardised concrete mix M30 a. In Foundation & basement

b. In Ground floor

c. In First floor

16.5) Precast Jally ventilator 50mm tk.using standardised concrete mix M30 without vibrating charges a. In Stilt/Ground floor

b. In First floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

18.9) Providing Form work and centering (Double stage) for reinforced cement concrete works having roof height 6m(or) above from floor level

21.5.1.3) Supplying and fixing of Solid Core Flush door Shutters with teakply on both side with teakwood lipping alround 35mm thick a) 1200x2400mm double leaf

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

21.7.3) Supplying and fixing of solid core flush door shutter of thickness 35mm a). door size 0.900 m x 2.100 (Single Leaf)

22.1.8) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf a). 1200 x 2400 mm ( Single leaf)

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

23.2.1) Supplying and fixing of 4mm thick pin headed Glass panels with Aluminium beadings

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2.1) Plastering with CM 1:5 12mm thick finishd with neat cement

34.2.1) ) Plastering in C.M. 1:4, 12 mm tk.

35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

36.1) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(BINDING WIRE insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M30)

b) Augering 30cm dia

44.5.3.1) Providing Rain Water Harvesting well ring circular shape of 90cm dia, 60cm depth,50mm thick using m30 grade concrete

44.6.1) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe UPVC Specials

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1) Supplying and fixng of Fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a.32mm dia

b. 25 mm dia

52.4) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe

52.9) Supply and fixing of 40mm dia MS clamp set

53.4) Supplying & fixing of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1) Supplying and fixing of of 15mm dia half turn CP long body tap

54.2.1) Supplying and fixing of of 15mm dia half turn CP short body tap

56.3.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.2) Supplying and fixing of of E.W.C.(White) 500 mm with "P" or "S" TRAP with double flapped seat & seat cover

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1.1) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable 5 amps flush type switch [Open Wiring] a) Light point With Ceiling Rose

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with fitting

71.2) Supplying and fixing of 32 AMPS Triple pole main switch

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletcronic Dimmer

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7.1) Run off mains with 2 wires of 2.5 Sqmm copper PVC insulated unsheathed single core 1.1KV cable (Open wiring)

78.5) Supply and fixing of 3 phase 32A aerial fuse unit for 3Nos.32A fuse units(500V)

79.8) Supplying and fixing 3 no of 32 Amps 500 volts grade porcelain fuse unit

81.1) Supply and fixng of TNEB meterboard suitable for 3phase 100A service connection

81.2) Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos.32A fuse unit (500V) 32A neutral link

82.3.1) Supply, fiing of 25W LED street light etc.,

87.1) Supplying and delivery of Three phase ELCB/RCCB

90.2.1) Providing additional Strutting to centering of R.C.C slab and beams site during execution of work for every additional 1 metre height a) 3.31mt. to 4.3mt

93.1) Plastering with CM 1:3, 12mm with WPC

98.5.1)TW panelled Double leaves door shutter with Brass furniture fittings. a. 1800X2400mm.(Double leaves)

105.1) Run off 4 wires of 4 Sq mm. PVC insulated unsheathed single core multi strand fire retardant flexible copper cable for 3 phase EB service connection

112.1) Supplying & fixing of Exhaust Fan 225mm dia

144.2.1) Supplying and fixing of 250 Watts Metal halide Flood light etc.,

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 C x 50 sq.mm. PVC LTUG aluminium armoured cable

b) 3.5 c x 185 sq.mm. PVC LTUG aluminium armoured cable

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 C x 50sq.mm. PVC LTUG aluminium armoured cable

b) 3.5 c x 185 sq.mm. PVC LTUG aluminium armoured cable

161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable a) 3.5 C x 50 sqmm PVC LTUG aluminium armoured cable

b) 3.5 c x 185 sq.mm. PVC LTUG aluminium armoured cable

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS8034 without Panel Board of capacity 50 LPM X 200m

171.2.9) Supply and Delivery of Three phase Openwell Submersible motor Pumpset 300LPM X 40m

175.3.1) Supply and fixing of horizontal type 4way triple pole neutral MCB distribution board in sheet steel enclosure double door

179) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm

179.1)Supply and run of 25mm x 3mm tinned coated copper flat on surface or in recess for connections as required with necessary MS clamps /support on wall /ground for earth connection

180) Supply and Run of 2 of No.8 SWG copper wire for earth connection

180.2.1) Labour charges for laying of flat cable below ground level a) 3 core 6 sqmm PVC insulated and sheathed flat type copper cable .

207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls

207.4.1) Providing two coats of Exterior Emulsion paint including primer for outer walls

207.4.2) Painting the ceiling with one coat Plastic Emulsion PAINT incl. Primer

213.1) Supplying and fixing of of SFRC manhole cover 600x600mm

216.3) Suppling and fixing of MS pipes IS sepcification with required steel section used for fabrication of truss works

238) Anticorrosive treatment for steel grills

238.1) Anticorrosive treatment for window grills

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 9watts LED bulb

b) 12 watts LED bulb

255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

343.2.2)Supply and fixing of Galvanium sheet 0.47mm thick

344.2) Supplying and fixing of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1) Concrete designer tiles flooring

362.2.2) Suppling and laying of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3

448.2) Providing PVC Tee with end cap

503.1) Supply and laying of required dia of Nylon rope

504.4) Supplying, laying, fixing and jointing the following PVC pipes as per D- 1785 of schedule 40 of wall (above) a) 50 mm dia UPVC pipes schedule 40 with required UPVC specials

b) 65mm dia UPVC pipes schedule 40 with required UPVC specials

608) Supplying, laying, fixing and jointing the following UPVC pipes of schedule 40 of below Ground level a) 50mm UPVC schedule 40 with required UPVC specials

609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kglcm2) as per IS 12818 /2010

609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2) as per IS 12818 /2010

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) a) l50mm dia casing pipes assembly

615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwell a)5 Hp to 10 Hp

615.3.1) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 6 Hp

615.3.2) Supply and delivery of Star-Delta starter confirming to IS 13947, in AC/ Three Phase/ 50HZ (+/- 5%) and 415V (+/- 10%) a)Up to 6 Hp

619.3.1) Supplying and delivery of following materials of best approved quality a) 65mm Union

619.5) Supplying and fixing of following dia GM Wheel Valve (Heavy duty) Confirming to I.S Specifications b.65 mm GM Wheel value

619.9) Supplying and fixing of following dia GM Non return Valve a.65mm dia GM Non-Return valve

707.2.1) Supply and laying of 3 core 6 sq.mm flat type copper cable

799.1) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary a) Drilling of borewell in upto 60m

b) Drilling of borewell from 60m to 90m

c) Drilling of borewell from 90m to 120m

799.1.2) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s a)up to 60m depth ending from ground level.

799.3) Charges for developing the borewell forthe entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

799.3.1) Supplying and fixing of 160mm dia PVC end cap for borewell

827) Supply and laying of Hard core layer 200mm

832.5.2)Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3)Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

931.8) Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity

931.9) Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher

959.2) Erection, Testing and commissioning of 58.5KVA Diesel generator set. With AMF Panel

959.3) Supply and Insulation for theExhaust Pipe with Silencer etc.,

959.4) Supply and installation of M.S. cable adopter box

959.8) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

959.9) Preparation of necessary drawings for approval CEIG

960.4.1) Numbering & lettering arrangements Supply and fixing of Aluminium TNPHC Emblem of 18" height

960.4.3) Supply and Fixing of 12" Height Aluminium letter s

960.4.4) Supply and fixing of 9" Height Aluminium letters

960.4.5) Supply and fixing of 20"x5" size plastic foam name plate

960.4.6) Supply and fixing of 24"x8" plastic foam name plate with vinyl cutting letter RWH Board

dp constructions (BID ID -1187750)

VIJAYMURALI BUILDER (BID ID -1186643)

P.MANOHARAN (BID ID -1187145)

K. BASKARAN & CO (BID ID -1186382)

M.M. ENGINEERS (BID ID -1186585)

Udayam Engineers and Builders Pvt Ltd (BID ID -1186824)

Bidder Name

BHARATH BUILDING CONSTRUCTION

P.MANOHARAN

dp constructions

M.M. ENGINEERS

Udayam Engineers and Builders Pvt Ltd

VIJAYMURALI BUILDER

K. BASKARAN & CO