CONSTRUCTION OF BALANCE WORKS FOR DWELLING UNITS INCLUDING ALLIED SERVICES FOR OFFICERS AND ORS AT COLABA MUMBAI (ARMY)

Amount

Sch 'A' Sec I (Building Works) Note: This schedule is not pre-priced by DGMAP and the prepriced rate indicated as "0.00" under Col 5 signifies this fact only

Completion of balance works of Construction of block of 88 DUs for Major and above (Stilt + 22, 4 DUs in each floor) in RCC shear wall construction with aluminium Form work (Mivan or equivalent) and self compacting concrete (SCC) including stilt car parking at ground floor showing all structures, main stair case, fire escape staircase, servant quarters including platform, perspect sheet i.e. covering to open sky portion, lift lobby, machine room, Mumty, shafts, plinth protection, plinth extension, steps, ramp, platforms, balconies and all fixture fitments, built in furniture as specified, fire fighting water tank, overhead services water tanks, loft tanks etc complete all as specified and shown on drawings and scope of work including RCC foundations all as specified and shown on drawings at Colaba - 01, Mumbai.

Completion of balance works of Construction of block of 59 DUs for ORS (Stilt + 15, 4 DUs each Floor to 14th floor and 3 DUs on 15th floor) in RCC shear wall construction with aluminium form work (Mivan or equivalent) and self compacting concrete (SCC) including stilt scooter parking at ground floor showing all structures, main stair case, fire escape staircase, perspect sheet i.e. covering to open sky portion, lift lobby, machine room, shafts, plinth protection, plinth extension, steps, ramp, platforms, balconies and all fixture fitments, built in furniture as specified, fire fighting water tank, overhead services water tanks, loft tanks etc complete all as specified and shown on drawings and scope of work including RCC foundations all as specified and shown on drawings at Colaba - 02, Mumbai

Completion of balance work of Construction of block of 58 DUs for ORS (Stilt + 15, 4 DUs each on F.F to 14th floor and 2 DUs on 15th floor) in RCC shear wall construction with aluminium form work (Mivan or equivalent) and self compacting concrete (SCC) including stilt scooter parking at ground floor showing all structures, main stair case, fire escape staircase, perspect sheet i.e. covering to open sky portion, lift lobby, machine room, Mumty, shafts, plinth protection, plinth extension, steps, ramp, platforms, balconies and all fixture fitments, built in furniture as specified, fire fighting water tank, overhead services water tanks, loft tanks etc complete all as specified and shown on drawings and scope of work including foundations all as specified and shown on drawings at Colaba - 03, Mumbai

Completion of balance works of Construction of block of 18 (EIGHTEEN) Car garages for Major with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba - 01 Mumbai.

Completion of balance works of Construction of block of 15 (FIFTEEN) Car garages for Major with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba - 01 Mumbai.

Completion of balance works of Construction of block of 13 (THIRTEEN) Car garages for Major with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba - 01 Mumbai.

Completion of balance works of Construction of block of 09 (NINE) Car garages for Major with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba - 01 Mumbai. For Block no 1

Completion of balance works of Construction of block of 09 (NINE) Car garages for Major with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba - 01 Mumbai. For Block no 1

Completion of balance works of Construction of block of 43 Scooter garages for ORs with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba-02 Mumbai.

Completion of balance works of Construction of block of 11 Scooter garages for ORs with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba 03 Mumbai

Completion of balance works of Construction of block of 23 Scooter garages for ORs with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba 03 Mumbai.

Completion o f balance works of block of 8 Scooter garages for ORs with RCC framed structure including foundations, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on drawings at Colaba 03 Mumbai

Completion o f balance works of Construction of block of 12 (TWELVE) Car garages for Majors with RCC framed structure including foundation, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on draings at Colaba - 01 Mumbai.Blockno1

Completion o f balance works of Construction of block of 12 (TWELVE) Car garages for Majors with RCC framed structure including foundation, RCC roof, RCC Shelves, ramps etc complete all as specified and shown on draings at Colaba - 01 Mumbai.Blockno2

Completion of balance works of Construction of garbage bin with plinth protection complete all as specified and shown on drawings. (Offr block)

Completion of balance works of Construction of garbage bin with plinth protection complete all as specified and shown on drawings.(58 ORs block)

Completion of balance works of Construction of garbage bin with plinth protection complete all as specified and shown on drawings.( 59 Ors block)

SCH "A " SECTION - II INTERNAL WATER SUPPLY Total of Sch " A " Section -II

SCH "A " SECTION - III INTERNAL ELECTRIFICATION Total of Sch " A " Section -III

SCH "A " SECTION- IV ROAD, PATH AND CULVERT Total of Sch " A " Section -IV

SCH "A " SECTION- V AREA DRAINAGE Total of Sch " A " Section -V

SCH "A " SECTION- VI FENCING COMPOUND WALL & GATE Total of Sch " A " Section -VI

SCH "A " SECTION - VII STREET LIGHTING Total of Sch " A " Section -VII

M & L sand filling in & around the cable including in & around punning down for cushioning complete as directed by Project Manager.

Supplying & laying unreinforced precast concrete cable cover class HVP type 1 with peak size 300 mm x 180 mm x 40 mm (Sub Class-B) laid in trenches for LT Cable protection complete as directed by Project Manager.

Supply, laying & jointing reinforcement concrete pipe 100 mm bore class NP-2 including collars as necessary for road crossing all as specified & directed (Earth work shall be measured & paid separately under respective item of schedule-A

Supply & laying in trenches/ pipe/ duct floor cable heavy duty armoured XLPE insulated & sheathed as per IS 1100 Volts grade Aluminium stranded conductor cable earth of size 6 sqmm 4 core all as specified & directed by Project Manager (Earth work sand cushioning & cable cover shall be measured & paid separately)

Supply & laying in trenches/ pipe/ duct floor cable heavy duty armoured XLPE insulated & sheathed as per IS 1100 Volts grade Aluminium stranded conductor cable earth of size 25 sqmm 3.5 core all as specified & directed by Project Manager (Earth work sand cushioning & cable cover shall be measured & paid separately)

Supply & termination of 4Cx 6Sq mm aluminium armoured cable with suitable size single compression brass cable gland & copper lugs complete.

Supply & termination of 3.5Cx 25Sq mm aluminium armoured cable with suitable size single compression brass cable gland & copper lugs complete.

Supply & erecting of steel tubular swaged poles including foundation as per manufacturer's design, single bend to shape complete with cast iron base plates, bolts, nuts & screws as specified Type 410 SP-31 (9.00 Metre long) complete suitable for street light fittings with painting two coats of aluminium paint over a coat of red oxide zinc chromate primer complete.

Supply & Laying of 2x2.5 Sq mm +1.5 Sq mm Multistrand copper conductor FRLS wire with 2 mm thick PVC sleeve of suitable size from street light pole marshalling box to light fixture complete with termination to MCB as directed by Project Manager

M & L for PCC 1:4:8 D-2 using stone aggregate of 40mm grade as in foundation concrete for pole including finishing the exposed surface using extra cement all as specified as per drawings & specification.

M & L for PCC 1:2:4 type B1 using stone aggregate of 20 mm grade as in foundation concrete for pole including finishing the exposed surface using extra cement all as specified as per drawings & specification.

Supply & errection of weather proof marshalling box with hinged door with proper size gasket etc. of size 300 x250 x135 mm for street light poles made of 14 SWG GI sheet with two coats of enamel paint red oxide primer along with 6 Amps SP MCB on din rail for phase & terminals blocks 3C x2.5 Sq mm cable glanding & proper fixing of clamp with bolts & nuts complete all as specified & directed by the Project Manager

Supply & fixing of street light luminaries HPSV 150 W single piece die cast/ Deep drawn aluminium housing complete with control gear compartment acrylic cover UV stabilised, blast of dual taping dynamic power shaving device of reduce power & wattage to 100W after 6 hours of peak load pre-wired complete with lamp & including arrangement for mounting GI pipe suitable size bracket arm complete with connection etc as specified

Supply & laying earth continuity conductor for main earthing lead of size 8 SWG (4 mm dia) GI wire fixed to wall or chased buried in ground or fixed to poles or any other indicated situation for loop earthings as required.

Earthing complete with galvanised steel earth pipe electrode 40 mm bore medium grade 2.5m length buried directly & preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron of steel wire all as shown in Plate No-4-SSR Part-I to the earthing test point all as specified & indicated including earth pit & trench, excavation, removal of surplus soil, PCC pit cover with fitting hook, funnel with watering pipe with wire mesh, charcoal salt, testing.

Supply & fixing of sodium Vapour Lamp Type 70 W post top lantern type complete with control gear cover etc with lamp 70W HPSV, connection PVC cable 3 x2.5 sq.mm copper conductor with 3M long 50 mm dia GI pipe, PCC foundation complete all as specified & directed by the Project Manager.

Earthing complete with galvanised steel earth plate electrode 600 x600 x 6 mm thick buried directly in ground not less than 2.25 metres deep connected to galvanised iron strip 32 x6 mm as earthing lead by means of bolts, check nuts & washers of galvanised iron of steel wire all as shown in drg details, earth pit & trench connected to earthing test point all as specified & indicated with & including excavation & earth work in any type of soil & removal of surplus soil up to 50m, PCC pit cover with lifting hook, funnel with watering pipe with wire mesh, charcoal salt testing.

Supply & fixing of 1 x150 W HPMV street light fixture complete with control gear & lamp etc all as specified & directed by the Project Manager

Supply, installation & commissioning of feeder pillar for street lights, cubicle type weather proof double door & sloped canopy outdoor type, totally enclosed factory made, dust & vermin proof, fabricated from CRCA sheet minimum 2 mm thick including painting as per the 7 tank process suitable for 415 Volts, 3-Phase, 50 C/S AC supply & space for spare feeders as shown including the cost of RC pedestal (1:2:4) to be included in the rate offered for each item & comprising of the following INCOMING (I) MCB, 3-Phase, 4 Pole, 63 Amps 25 KA 415 Volts -1 No (ii) Bus bars, 3-Phse, 4 Strips of Aluminium strips, 25KA rating, 100 Amps - 1 set OUTGOING a) 20 Amps TPN MCCB, 25 KA,415Volts, 3 Phase- 415 Volts 50 C/S AC supply - 3 Nos with Timer switch 415 Volts, 3 Phase-, 415 Volts, 50 C/S AC Supply of 20 Amps rating with contractors 3 phase complete fittings & connection to LT cable for street light poles, use of timer controls (With feeder pillars) with control to reduce the lighting as under:- (I) 6 PM to 10 PM : 100% (ii) 10 PM to 02 PM - 66% (iii) 2 PM to 6 PM-33%

M&L for rendering 10mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth without using extra cement.

Excavation in trenches/ foundation not exceeding 1.5m wide & 1.5M depth for pole foundation & excavating 10 Sq M in plan & 1.5M in depth & getting out returning filling in & removing surplus soil complete all as specified.

Supply, fixing testing & commissioning of 12.5M high mast shaft in 2 sections suitable for 50M/sec wind speed, with raising & lowering system comprising of head frame, luminaries carriage suitable to install 12 no's luminaries in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial complete.

Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates & templates suitable for item No 7.22(a) above

Supply & installation of Non integral flood light luminaries type BGEMF 22 R with 2 Nos 400 W SVT lamps & their control gear boxes.

Supply, installation & commissioning of outdoor stand mounted feeder pillar with 636A TPN MCB as incomer, single dial time switch of 45A Triple pole type contractor for Automatic switching of luminaries power tool control with 2 Nos 9 A contractor & raise lower push button incoming 35 Sqmm & outgoing 16 & 25 Sqm mm terminal.

Supply & fixing 40mm GI pipe light grade 1.2 M long partly in ground and partly along with the existing pole bending etc as required.

Numbering of street light pole with enamel paint complete all as specified

SCH "A " SECTION - VIII LIGHTING CONDUCTOR Total of Sch " A " Section -VIII

SCH "A " SECTION - IX FIRE FIGHTING Total of Sch " A " Section -IX

Fire Pump Electrical Motor Driven-1 for hydrant system & 1 for sprinkler system. Supply, installation, testing and commissioning of TAC approved electric motor driven Main fire Pump set suitable for automatic operation consisting of the following & as per specifications. (a) Pump shall be of centrifugal multistage type, vertically split casing horizontal end suction, single stage with cast iron body, bronze impeller & wear ring, SS shaft & shaft sleeve directly driven by electrical motor as per N B C - 1983 for fire fighting suitable for deliver of 2280 lpm developing not less than 13 kg/cm2 pressure alongwith pump cooling system. pump shall be capable of giving a discharge of not less than 150% of the rated discharge at a head not less than 65% or rated head & shut off head shall not exceed 120% rated head. (b) Squirrel cage, induction motor confirm to IS:325-1978 suitable for operation at 415 V +/- 15% 3 phase, 50 + 5% Hz AC supply totally enclosed, fan cooled type & conforming to protection clause IP 55 as per IS:4691 & insulation class shall be F with temp, rise limited to B rated for continuous duty and shall have HP rating to drive pump at 150% of its rated discharge or at 120% of rated head, whichever is more. (c) Conmon base plate fabricated out of MS channel, couppling guard plain cement of RCC pump foundation and vibration pads gland packing gland drain line & Min, follow line with isolation valve pressure guage with SS U-tube, Y-tube suction strainer, Pr swicth for automatic pump operation. (d) Testing painting start-stop pressure setting shall be as per tender requirements, Pump-2280 lpm 115M Head Motor 100 Hp, 2900 RPM.

All as per Item No 9.01 , here in before, but start-stop pressure setting shall be as per tender requirements, Pump-2280 lpm 95M Head Motor 100 Hp, 2900 RPM.

Diesel engine driven pump -Supply, installation, testing and commissioning of TAC approved Diesel Engine driven Fire Pump set suitable for automatic operation of the following & as per specifications. (a) Pump shall be of centrifugal multistage type, vertically split casing horizontal end suction, single stage with sleeve directly driven by Diesel engine as per NBC 1983 fire fighting suitable for delviery of 2280 lpm 95M Head developing not less than 150% of the rates discharge at a head net less than 65% of rated head & shut off head shall not exceeded 120% rated head. (b) The engine shall be cold starting type, multi cylinder, vertical 4 stroke cycle, water cooled conforming to BS:649/I: 1601/ IS:10002 developing suitable HP to drive the fire pump. The engine shall be capable to drive the pump at 150% rated or at 120 of its rated head whichever is more shall have 10% overload capacity of one hour in any period of 12 hours continuous run. ( c) Engine shall be complete with automatic starting mechanical with electrical batteres, flywheel cooling system fuel oil system, LO system fuel services tank, filters, exhaust silencer, instrument panel etc. (d) conmon base plate fabricated out of MS channel, couppling guard plain cement of RCC pump foundation anti vibration pads gland packing gland drain line & Min, follow line with isolation valve pressure guage with SS U-tube, Y-tube suction strainer, Pr swicth for automatic pump operation. testing painting start-stop pressure setting be as per specifications.

Jockey Pump:- Supply, installation, testing and commissioning of TAC approved electric motor driven Main fire Pump set suitable for automatic operation consisting of the following & as per specifications. (a) Pump shall be of centrifugal multistage type, vertically split casing horizontal end suction, single stage IP 55 enclosures with cast iron body, bronze impeller & wear ring, SS shaft & shaft sleeve directly driven by TEFC electrical motor as per N B C - 1983 for fire fighting suitable for delivery of 180 lpm 115M Head developing not less than 10 kg/cm2 pressure. (b) Squirrel cage, induction motor confirm to IS:325-1978 suitable for operation at 415 V +/- 15% 3 phase, 50 + 5% Hz AC supply totally enclosed, fan cooled type & conforming to protection clause IP 55 as per IS:4691 & insulation class shall be F with temp, rise limited to B rated for continuous duty and shall have HP rating to drive pump at 150% of its rated discharge or at 120% of rated head, whichever is more .( (c) Conmon base plate fabricated out of MS channel, couppling guard plain cement of RCC pump foundation anti vibration pads gland packing gland drain line & Min, follow line with isolation valve pressure guage with SS U-tube, Y-tube suction strainer, Pr swicth for automatic pump operation. testing painting start-stop pressure setting shall be as per tender requirements. pump 180 lpm 115m head motor 7.5 HP, 2900 RPM.

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbous reducers unions, flanges, GI nuts bolts washer, etc including all welding / fxing and excavation required.

(a) 200 mm dia

(b) 150 mm dia

(c) 100 mm dia

(d) 80 mm dia

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (a) 200 mm dia

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (b) 150 mm dia

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (c) 100 mm dia

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (d) 80 mm dia

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (e) 65 mm dia pipe

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (f) 50 mm dia pipe

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (g) 40 mm dia pipe

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (h) 32 mm dia pipe

Supply, installation & testing of MS/E RW heavy duty pipe (IS-1239 Part-I) 3589 Part-I 1974 heavy duty including cutting threading welding etc bend, elbows reducers unions, flanges, GI nuts bolts washer, etc including all welding / fixing and excavation required. (j) 25 mm dia pipe

Supply, fixing CI double flanged valves with companion flanges, non return valve including nut and bolt 1.5mm thick compression gasket with accompanying flanges.

(a) 150 mm dia

(b) 20 mmdia

Supplying, fixing testing and commissioning of ISI marked cast ironh double flanged Butterfly valve complete with companion flanges, pipe fittings, bolts nuts CAF gasket etc duly painted as per specification.

(a) 200 mm dia

(b)150 mm dia

(c) 100 mm dia

(d) 80 mm dia

(e) 65 mm dia

(f) 50 mm dia

Supply, fixing, testing and commissioning of Air release valve brass body 32mm (gate valve) dia in riser with isolating valve.

Supply and fixing bolting, welding. Radiography testing painting and commissioning of hydrant valves single headed ISI marked 63 mm dia single headed landing valve CI hand wheel CAF gasket nuts, bols, etc conforming to IS:5290-1977 type A for internal hydrants as per specifications and instructions of site incharge.

Supply and fixing ISI marked 63mm dia male instantaneous inlet spray nozzle made of gun metal to IS:903 arrangement for straight stream spray, shut-off and trigger type handle as per specifications.

Supply and fixing fire fighting delivery hose, PRL Hose pipe 15M long 63 mm dia ISI marked, non-percolating, flexible, 3 layered synthetic jacketed with electrometric outer covering resistant to liquids, chemicals, acids, alkalis, solvents, abrasion & heat having 42 kg/ cm2 burst pressure 18 kg /cm2 working pressure conforming to IS:636-1988 type -B and having TAC MMD approvals in 15 mtr length with copper wire bounded. instantaneous type 63 mm fire hose pair of male & female coupling made of aluminium alloy (anodised) in each run of hose conforming to IS:903 as per specifciations.

Supply and fixing ISI marked first aid fire hose reel conforming to IS:884-1985 comprise of reel hose guide, full swing drum fixing bracket, 20 mm bore 36 meters long high-pressure braided rubber hose tubing confom to IS:1532-1969,25 mm dia ball valve, stainless steel stop cock and nozzle duly painted as per tender requirements / specifications and instructions of site incharge.

Supply, installation & testing of MS fire hose cabinet fabricated from 16 gauge MS sheet of fully welded construction with hinged double front door with locking arrangement, full glass door 4 mm thick approved by local fire authority, painted as per tender requirements / specifications and instructions of site incharge.

Supply, Testing and commissioning pressure guage (2 Nos), pressure switch (1 Nos), valves pipes and fittings etc.

M&L Earthing with GI earth plate 600 mm x 600mm x 6mm thick including accessories and providing mansonry encloure with cover plate having locking arrangement and watering pipe etc with charcoal or coke and salt including providing and fixing 32 mm x 6 GI strip on surface or in recess for connection etc. as required and providing and fixing 4.00mm GI wire on surface or in recess for loop earthing as required and complete with excavation earthing pit with CI cover all as specified and as per SSR-II item no 5497.

Supply and installation weather proof hose cabinet of size 800 mm w x 1000 mm H, x 400 mm D for external yard hydrant fabricated out of 3mm thick MS sheet with 4 mm thick glazed glass door infront, having locking arrangement suitable to accommodate external yard hydrant with valve hose branch pipe with all necessary pipe accessories fittings etc mounted on wall as raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint sign writing etc as required as specified.

Supply and fixing four way fire brigade inlet with 150 NB with Butterfly valve with matching flanges and with glass front floor with 1 No Butterfly valve and 1 No non return valve complete all as specified.

Supply and fixing Two No's of 63 mm dia instantaneous inlet arrangement on 150mm dia header, 2 Nos, 150 mm sluice valve-1 No, 150 mm non -return valve, fabricated out of SWG MS sheet with central opening with red enamel painting complete.

Supplying & fixing self priming PVC tank of 700 litres capacity including pipe 25 mm dia GI for connection.

Supply & fixing GI puddle flanges, site fabricated from class C pipes - of 1 mtr length.

(a) 150 mm dia

b) 100 mm dia

Coating and wrapping of underground pipes ISI Mark IWL make

Supply and fixing suction coupling for the fire brigade for drawal of water from tank with 100 mm Dia pipe and foot valve (pipe 8M long) complete all as specified.

Supply and fixing suction coupling for the fire brigade fo drawal of water from tank with 150 mm dia pipe for foot valve (pipe 8 M long) complete all as specified.

Supply and fixing 15 mm dia x 1.0 M high air vessel fabricated out of 8 mm thick MS sheet complete with dished top and bottom end. Air release valve tripod type stand, pressure gauge with ball valve, drain ball valve of 50mm dia with 2 or - lor g GI(H) piping complete as required.

Supplying, installing testing & commissioning of conventional sprinkler quartzoid bulb type with 15mm screwed and connection of 68 deg.c.temp, rating K 80 & orifice shall not be less than 6 mm sprinkler shall be UL listed & FM approved with chrome finsihed.

Supply installing testing and commissioning of flow switch on sprinkler distribution on each floor and shall be connected to fire alarm panel through cable.

a) Dia 100 mm

b) Dia 65 mm

c) Dia 50 mm

Supply installing testing and commissioning of flow switch on sprinkler distribution on each floor and shall be connected to fire alarm panel through cable.

Supply installing testing and commissioning of flow switch on sprinkler distribution on each floor and shall be connected to fire alarm panel through cable.

a) Dia 100 mm

b) Dia 80 mm

Providing and constructing a masonry pit of internal dimension 1.0 x 1.0m x 1.0M depth of accommodate each of valves placed externally, wall to be of brick masonary in cement mortar 1:5 (1 cement : 5 fine sand) with SFRC medium duty 10 MT grade designation manhole cover with frame (560 mm internal dia conforming to IS:12592). The top slab RCC shall be 150 mm thick of 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, the manhole chamber shall be internally finished with commerical grade white glazed tiles 6 mm thick complete .

Supply and fixing CI body foot valve to be provided on suction line for each pumping sets of sizes as under:-

a) 150 mm dia

b) 80 mm dia

Supply and fixing "Y" stainer CI body foot valve to be provided on suction line for each pumping sets of sizes as under:-

a) 150 mm dia

b) 80 mm dia

Note: Rate shall be inclusive of clamps, hangers, installation and first charge etc.

Fire Extinguisher

Supply and fiixing of DCP powder type (ABC) 5 kgs capacity - ISI mark first (IS:2171/13849, 14609)

Supply and fixing of Fire Extingusher Mechancial foam (AFFF) Type 9 liters capacity (IS:10204)

Supply and fixing fire Extinguisher CO2 Type 5 kg Capacity (IS-2878)

FIRE ALARM SYSTEM

Supplying, installing, testing and commissioning of Main Panel of 15 Zones for fire alarm system with suitable sounder cards and fault isolaters mounted at Security Room having facility of fire indications.The panel wall mounted cabinet shall be made out of 16 SWG CRCA sheets as per IS: 2189. The main control panel should have provision of battery have the arrangement for Audio / visual inciations by dual lamps for fire and faults in each zone finished in stove have sealed Nickel -Cadmium maintenance free battery housed in a wooden / plastic box with supporting stand and boost / trickle charger, DC voltmeter, short circuit fire alarm, push button for lamp test, fire alarm circuits healty check etc complete all as sepcified and directed by PM..

Supplying, installing, testing and commissioning of Main Panel of 15 Zones for fire alarm system with suitable sounder cards and fault isolaters mounted at Security Room having facility of fire indications. The panel wall mounted cabinet shall be made out of 16 SWG CRCA sheets as per IS: 2189. The main control panel should have provision of battery have the arrangement for Audio / visual inciations by dual lamps for fire and faults in each zonefinished in stove have sealed Nickel -Cadmium maintenance free battery housed in a wooden / plastic box with supporting stand and boost / trickle charger, DC voltmeter, short circuit fire alarm, push button for lamp test, fire alarm circuits healty check etc. complete all as required.

Supply, installation, testing and commissioning of dual tone electronic hooter housed in 16 SWG sheet steel enclosure finished in stove enamel PO red paint suitable for wall / ceiling mounted complete including connections etc as per tender requirements / specifications.

Supply, installation, testing and commissioning of manual call point completely recessed (break glass unit) housed in existing 16 SWG sheet steel housing including Siemens / L & T push button switch (spacing loaded action) with Normally closed / Normally open contacts as per specifications.

Supply and drawing of 2.5 Sq. mm single core strandard PVC insulated copper conductor cable conforming to IS: 694 (Part-1) in Rigid Steel conduit in recess / surface including terminations and connections etc as required, (rates for Rigid Steel conduit are also included in rates quoted by contractor).

Supply, fixing, testing and commissioning of Zonal panel to be installed at stilt area, except battery and battery charging system.

Fire Detection Devices:- i) Supply and fix smoke detector complete with base and other items require for fixing ceiling.

Supply and fix heat detector complete with base and other items require for fixing.

For COLABA 01 :- Supplying, installing, testing and commissioning of electrical monoblock Booster pump of capacity 900 lpm @ head of 115 m to get a pressure of 3.5 kg/sq.cm at the topmost hydrant with booster starter with M.S. frame and clamps as necessary for fixing the pumps on the top of slab as per site conditions and instructions of site engineer in charge including proper fixing foot valve with stainer, sluice valve, non return valve, pressure guage, pressure switch etc. including complete on/off push button provision on ground floor with necessary wiring etc.

For COLABA-02 & 03 :- Supplying, installing, testing and commissioning of electrical monoblock Booster pump of capacity 900 lpm @ head of 95 m to get a pressure of 3.5 kg/sq.cm at the topmost hydrant with booster starter with M.S. frame and clamps as necessary for fixing the pumps on the top of slab as per site conditions and instructions of site engineer in charge including proper fixing foot valve with stainer, sluice valve, non return valve, pressure guage, pressure switch etc. including complete on/off push button provision on ground floor with necessary wiring etc.

Construction of Brick masonry valve chamber with internal (450MM x 450MM) & external cement plaster including P.C.C 1:4:8 and cast iron frame & cover of medium weight size upto depth of 1 m

SCH "A " SECTION - X LIFTS Total of Sch " A " Section -X

13 Passangers Lift (S+22)

8 Passengers Lift (S+22)

13 Passengers Lift (S+15)

13 Passengers Lift (S+15)

8 Passengers Lift (S+15)

Supply and laying cable XLPE insulated Electric Armoured (Heavy duty) 1100 V as per IS1554 (Part I) stranded Aluminium conductor 70 Sq mm 3.5 core complete all as specified.

Supply and laying cable XLPE insulated Electric Armoured (Heavy duty) 1100 V as per IS1554 (Part I) stranded Aluminium conductor 50 Sq mm 4 core complete all as specified.

Supply and installation testing and commissioning cubicle type wall mounted, LT panel working 440 V, 3 Phase, 50 AC supply with TPN aluminium bus bar dust proof and vermin proof with canopy top, 2mm thick CACA sheet steel enclosure painting as the 7 Tank process IP-55 protection installation, as per specification and having the following details.(a) Incomer MCCB, 100Amp, 3 Phase, 25 KA 415 Volts - 1 No (b) Bus bar 100 Amp Aluminium bus bar TPN suitable for 25 Ka complete with Colour Code etc. (c) Out Going (i) MCCB, 40Amp,- 25KA-, 415V 3 Phase -3 Nos (ii) MCB 32 Amp, 10KA- 3 Phase, 415 V = 2 No (iii) MCB 32 Amp DP 10KA -2 Nos (iv) MCB 10 Amp DP 10 KA -2 Nos

Supply and installation testing and commissioning cubicle type wall mounted, LT panel working 440 V, 3 Phase, 50 AC supply with TPN aluminium bus bar dust proof and vermin proof with canopy top, 2mm thick CRCA sheet steel enclosure painting as the 7 Tank process IP-55 protection installation, as per specification and having the following details. (a) Incomer MCCB, 63Amp, 3 Phase, 25 KA 415 Volts - 1 No (b) Bus bar 100 Amp Aluminium bus bar TPN suitable for 25 Ka complete with Colour Code etc. (b) Out Going (i) MCCB, 32Amp, 3 phase- 25KA-01 no, 415V 3 Phase -3 Nos (ii) MCB 20 Amp, 10KA- 3 Phase, 415 V = 2 No (iii) MCB 10 Amp DP 10KA DP -1 Nos (iv) MCB 10 Amp DP 10 KA DP -1 Nos

Supply & fix termination of 3.5 core 70 sqmm aluminium cable using single compression type brass cable gland and dowels make lugs and making proper connections.

Supply & fix termination of 25 sqmm 3.5 core cable using single compression type brass cable gland and dowels make lugs and making proper connections.

Supply, fabrication and fixing of 600 wide ladder type cable trays suitable size for LT cable 70/25 sq mm 3.5 core cable, made out of 40 mm angle as side runners and 25 x6 mm Ms flat 2 Nos at required internals materials two coats of enamel painting and complete accessories.

SCH "A " SECTION - XI AVIATION LIGHTS Total of Sch " A " Section -XI

Supply, fixing, testing and commissioning of aviation obstruction light twin lamp lighting fixtures Bajaj cat No BJADL1 or equivalent including non lamp in 75VA stop up transformer, heat resistant clear thick glass and accessories. Fixture shall have die cast aluminium alloy housing including connection complete with red clear lamp Control switch etc all as specified and directed by PM

Supply and laying 3 core, copper conductor 2.5 sqmm armoured (heavy duty) PVC insulated 1.1 KV complete for aviation light

Termiantion of 3 core 2.5 sq mm cable using suitable size single compression gland, including time switch 20 A rating with connector in steel enclosure complete

SCH "A " SECTION - XII SITE CLEARANCE & AREA DEVELOPMENT Total of Sch " A " Section-XII

Varindera Constructions Limited