REPAIR / MAINT FLOOR, JOINERY, INTERNAL WATER SUPPLY AND CONNECTED B/R ITEM OF TUSHAR VIHAR, 14 EME AND ADJOINING AREA UNDER AGE B/R-II OF GE (N) UDHAMPUR.

Amount

Demolition of cement concrete (un-reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc. and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis upto 5 KM from MD lant, complete all as specified and directed.

Demolition of stone slabs and tiles, laid dry or dry beded or pointed of any description or thickness as in floors, aprons, walls etc, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick (square / rectangular), area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of each size 300x200x7mm / 350x250x7mm / 450x350x7mm as on vertical surfaces of walls, dados, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4, complete all as specified and directed.

M&L for 10mm thick virified light shade ceramic tiles (square / rectangular), polished, area of each tiles not exceeding 0.36 Sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 10mm thick virified light shade ceramic tiles (square / rectangular), polished, area of each tiles not exceeding 0.36 Sqm, as in dados/ skirtings etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, fixed over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including grinding and polishing with rounding to edges of stone slabs one edg complete, laid/ fixed over and including 10mm thick screed be/ plaster CM 1:4, complete all as specified and directed.

M&L for 10mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6 including finishing the surface even and smooth without extra cement, complete all as specified and directed.

M&L for 15mm thick rendering into two layers consisting 10mm thick in CM 1:4 followed by 5mm thick in CM 1:4 with using WPC on fair faces of brick work or concrete surface including finishing the surface even and fair without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

M&L for 5mm thick rendering on ceiling surfaces of concrete or brick work in CM 1:3, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer and 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan, exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.

M&L for RCC 1:2:4 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of dormwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

M&L for water proofing treatment to the sunken portion area of each sunken portion with removing of exiting treatment with demolition of existing floor of any type upto depth not exc 0.60 mtr including filling of floor with PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates), WC & P/S trap and cleaning with wire brush, one coat of bitumen @ 1.70 Kg per Sqm, 15mm thick plaster in CM 1:4 on all sides portion, one 450mm long 32mm dia spout, water proofing powder @ 3% mixed by weight of cement, complete all as specified and directed.

S&F in replacement WC (squatt pattern) including cement concrete bedding, size 580mm x 440mm including PVC 'P or 'S' trap, front and back inlet and with internal foot rests (excluding flushing cistern) including flush pipe and connector pices of PVC and removed old CI Pipe including demolition of PCC upto 450mm depth, complete all as specified and directed.

S&F in replacement One Piece wash down water closet (Pedestal pattern), complete with pedestal pan and 'P' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including PVC seat and cover for pedestal pan and CP Jet spray alongwith flexible tube/pipe, complete all as specified and directed.

S&F in replacement wash down water closet (Pedestal pattern), complete with pedestal pan and 'P' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including PVC seat and cover for pedestal pan and CP Jet spray alongwith flexible tube/ pipe, complete all as specified and directed.

S&F in replacement PVC low level flushing cistern of capacity 10 ltrs, white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipe, complete all as specified and directed.

S&F in replacement wash basin, vitreous china (flat back or angle back type), size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling of 32mm dia and PVC waste pipe of 32mm dia, complete all as specified and directed.

S&F in replacement vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) but including urinal spreader with PVC connection of 15mm dia with PTMT nuts of length 450mm and PVC waste pipe of 32mm bore and CP waste coupling, complete all as specified and directed.

S&F in replacement PVC connection of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in replacement health faucet, CP, brass with 8mm dia and 1 mtr long flexible tube with wall hook, complete all as specified and directed.

S&F in replacement CP Jet for EWC's with required size of jet pipe (flexible) and connections, complete all as specified and directed.

Taking down eaves gutters and rainwater pipes upto 07 Storey Bldg (23 Mtr Height) of any size or pattern including all fittings, heads, shoes, bends, swan necks etc. including necessary arragement for fixing of pipe like scaffolding, ladder and all other fittings / accessories, complete all as specified and directed. Note :- Rates for scaffolding, ladder and other means shall be deemed to include in the quoted rates.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/ floor upto 07 Story Bldg (23 Mtr Height) with stack clapms of suitable size and fixed with nuts and bolts including necessary arragement for fixing of pipe like scafolding, ladder and all other means, complete all as specified and directed. Note :- Rates for scaffolding, ladder and other means shall be deemed to include in the quoted rates.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/ floor upto 07 Story Bldg (23 Mtr Height) with stack clapms of suitable size and fixed with nuts and bolts including necessary arragement for fixing of pipe like scafolding, ladder and all other means, complete all as specified and directed. Note :- Rates for scaffolding, ladder and other means shall be deemed to include in the quoted rates.

S&F 110mm bore PVC (SWR) bends with access door, any radius, fixed in 07 Story Bldg (23 Mtr Height), complete all as specified and directed. Note :- Rates for scaffolding, ladder and other means shall be deemed to include in the quoted rates.

S&F 75mm bore PVC (SWR) bends with access door, any radius, fixed in 07 Story Bldg (23 Mtr Height), complete all as specified and directed. Note :- Rates for scaffolding, ladder and other means shall be deemed to include in the quoted rates.

S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of 110mm bore pipe, fixed in 07 Story Bldg (23 Mtr Height), complete all as specified and directed. Note :- Rates for scaffolding, ladder and other means shall be deemed to include in the quoted rates.

S&F PVC (SWR) branch piece, single (single Y/T) equal or unequal of 75mm bore pipe, fixed in 07 Story Bldg (23 Mtr Height), complete all as specified and directed. Note :- Rates for scaffolding, ladder and other means shall be deemed to include in the quoted rates.

S&F 100mm dia sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm dia sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore cast iron bends of any radius, complete all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, suitable for 75/110 bore pipe, complete all as specified and directed.

S&F in replacement 100mm bore sand cast iron bend / reducer / Tee (any radius) with access door, diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F 75/100mm bore CI vent cowl including taking down old CI vent cowl of any type, complete all as specified and directed.

S&F ball valves (minimum weight 142 gms), high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F ball valves (minimum weight 210 gms), high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for 20mm bore iron pipe, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

Dismantling water tank and removing to store, exc 250 litres but not exc 500 litres capacity with all necessary fittings, complete all as specified and directed.

Cleaning of 1000 litres capacity water tank including removing all scale and dirt, etc. from tank and from mouths of circulating pipes etc, complete all as specified and directed.

Cleaning of 500 litres capacity water tank including removing all scale and dirt, etc. from tank and from mouths of circulating pipes etc, complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tank, tripple layered, white colour (cylindrical vertical with closed top), hoisted and fixed in position including nipple, inlet and outlet and conneting pipes and including taking down of old UNSV existing tank with all fittings, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank, tripple layered, white colour (cylindrical vertical with closed top), hoisted and fixed in position including nipple, inlet and outlet and conneting pipes and including taking down of old UNSV existing tank with all fittings, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in slab flooring, sub base and levelling course, complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for factory made, glossy finish, coloured chequred cement concrete tile of size 30cm x 30cm x 25mm thick each, machine pressed, as in floors, laid/ fixed over and including 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and joints fiil up with white grey cement and pigment to match with the tiles, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

Fixing only GI tubes, medium grade of 15mm bore including all fixing accerroies and laid in ceilings or floors or fixed to walls, complete all as specified and directed.

Fixing only GI tubes, medium grade of 20mm bore including all fixing accerroies and laid in ceilings or floors or fixed to walls, complete all as specified and directed.

S&F in replacement bib tap, long body, chroimum plated (ISI Marked with valid CML No) with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule including elbow/ socket etc as required at site, complete all as specified and directed.

S&F CP shower with arm 15mm dia, 195mm long with bend of 45 degree with wall flange including taking down existing UNSV shower of any type/ shape, complete all as specified and directed.

S&F in replacemetnt angle cock, chromium plated, cast copper alloy, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in replacement stop valve, concealed type, long shank, chromium plated, brass, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed for 15mm bore iron pipe or for union, complete all as specified and directed.

S&F in replacement gun metal, globe or gate valve with iron wheel head, screwed both ends for 20mm bore iron pipe, complete all as specified and directed.

S&F in replacement plastic water closet seat cover, white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in replacement chromium plated tubular towel rail, 'D' type, 600mm long between flanges, complete all as specified and directed.

S&F chromium plated grating doom of 100mm dia with or without waste hole as required at site, complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame), area exc 1.50 Sqm but not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down shutters of any description, area not exc 1.0 Sqm each, complete all as specified and directed.

Taking down shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as filling inside hollow section etc, complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face sanmika (pattern and design as approved by GE) with lipping/ frame to match and polished on sides of shutters, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton, factory made shutters (three panel) open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, complete all as specified and directed.

S&F 35mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F plain framed, panelled shutter 35mm thick, 2nd class hard wood (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening and fixed at site, complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style), consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as specified and directed.

S&F 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F in repair 18mm thick prelaminated medium density fibre boards, glossy finish/ UV finish interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in cup board, shelves, kitchen cabinet etc, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repair mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane with fixing new clips or pins (as required) and including hacking out old broken glass (any thickness, size, quality or description) from metal frames / wooden frame / aluminium frame including punching or drilling out old glazing pins or spring clips or any type of beading, complete all as specified and directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100mm long stainless steel butt hinges, heavy weight, cold rolled, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F 300mm size, ordinary rat tail rod pattern springs including roller and roller plate, fixed to wooden or steel frames with welding etc, complete all as specified and directed.

S&F in replacement 300mm size, ordinary rat tail rod pattern springs including roller and roller plate, fixed to wooden or steel frames with welding etc, complete all as specified and directed.

M&L for welding of small mild steel articles such as butt hnges of any size, pintel hinges of any size, steel window frames, MS door chokats all up height of G+2 building including necessary parts and fixing the same to existing frame required as per requirement including necessary arrangement of scoffolding, ladder etc, complete all as specified and directed.

M&L for factory made (box type) mild steel widow / ventelators, glazed and gauged combined shutter with side hung including box type hinges steel peg stay locking arrangement with glazing and gazing bar dovetailed or welded and one shop coat of red oxide primer, complete all as specified and directed. Note :- (a) The window / ventelator shall be fabricated as per drg No. CEUZ/TD/1302/2009 sheet 1/3 to 3/3. (b) MS fillets, glazing, wire gauges shall be measured and paid for seperately. (c) One side out to out dimensions shall be measured for payment of combined window (glazed & gauged).

M&L for preparation of new steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of pink primer, complete all as specified and directed.

S&F in replacement sink with drainage board, made of stainless steel 1mm thick, kitchen with with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of size 25x25x4mm thick and connecting union to pipe and 32mm dia sink CP coupling with PVC waste pipe as size required & overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm, complete all as specified and directed.

S&F in replacement sink, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Dismantling of existing roof treatemnt of any type or any surface and picking up, sweeping, cleaning and washing down with water and removal dust etc. for depressions of RCC surface, complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4, type B-1 (using 20mm grade crushed stone aggregates) as in floor, sub base or other surfaces, complete all as specified and directed.

M&L for 10mm thick cement screed in cement mortar 1:3 including finishing the surface even and smooth without using extra cement to receive roof treatment, mixed with water proofing compound over and including a neat cement slurry @ 3 Kg/Sqm over cleaned roof surface, as in grading to RCC roof surface and including taking down existing cement plaster from top of roof, scrubbing down with water etc. of any description, complete all as specified and directed.

M&L for water proofing roof treatment, consists of a Atactic polypropylene modified polymeric membrane of minimum 3mm thick and minimum weight not less than 3.0 Kg/Sqm, reinforced with polyster non woven fabric matt (weight not less than 150 Gm/Sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100mm with and including priming @ 0.40 lit/Sqm the surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm each at top and bottom of the membrane as bonding material including sealing all joints by thermo fusion, complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Supply only integral water proofing compound.

M&L for machine cut kota stone slab flooring, 18-20mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid/ fixed over and including 15mm thick cement screed in CM 1:4 including dismantling existing stone slab, complete all as specified and directed.

M&L for machine cut kota stone slab, 20-25mm thick as in riser with bull nose, skirting, dados and pillar, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting, rounding edging and polishing, fixed over and including 15mm thick cement screed in CM 1:4, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description, not otherwise specifically provided for, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated etc.) sheets as in roof coverings, complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets as in roofs, walls etc, fixed with 'L' type or 'J' type hooks, complete all as specified and directed.

S&F clean sawn second class hardwood as in scantling including taking down old scantling from site, complete all as specified and directed.

M&L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS1161- 1979 Grade ST-240, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F in replacement centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement single lever wall mixer, brass, chromium plated, fancy type, with capstan head handles with lettered 'Hot' and 'Cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection with provision for both hand shower and over head shower, complete all as specified and directed.

S&F false ceiling with everest fiber cement designer tile lvory/ white paintwd (high pressure steam cured) of 4mm thickness (as per IS-14862) of size 595x595mm and any one of the design (occeanic, lake & hill cascade or electra) in true horizontal level, suspended on interlocking power coated certa black pattern metal grid of hot dipped galvanised steel section (galvanised @ 12 Grams both side inclusive) consisting of main 'T' runner with suitably spaced joint to get required length and 15x32mm, made of 0.30mm sheet spaced between main T @ 600mm C/C from a ridge of 600x600mm and wall angle of size 15x20mm made of 0.30mm thick sheet and laying false ceiling tile in the grid including required cuttig / making opening for service like diffuser grils light suspended from ciling using GI soffit cleats fixed to existing rafters purlin etc. with dash fastener GI adjustable rod of 3mm dia with galvanised butterfly level clips spaced at 1200mm c/c along main 'T' bottom exposed width of 15mm of all T-sections shall be centre black prepainted with poiyester paint and having a load bearing capicity of 12 Kg/Sqm and refixed all existing electric wiring anf fixture, complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick but wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

S&F mortice lock with two lever mild steel body (vertical type) 100mm length of latch with 3 set of keys, fixed in door shutter with proper in position, complete all as specified and directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate 'Z' sections sliding 2 & 3 tier openable type as and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, complete all as per architectural drawings and the directions of Engineer-in-Charge.

M&L for powder coated anodised aluminium door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, handles 2 Nos in each door, hinge anodised aluminium snap beading, screws, complete all as specified and directed.

M&L for powder coated anodised aluminium sliding shutter of window and ventilator openable/ louvers fixed/sliding type shutters without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.), complete all as specified and directed.

M&L for anodised aluminium grill 5 to 6mm dia of mesh, not exc 7.5cm in either direction (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete as per requirement and direction of Engr-in-Charge.

S&F 5mm thick frosted/ tinted sheet glass, fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame, complete all as specified and directed.

S&F in replacement door closers of aluminium die cast body, hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 KG, complete all as specified and directed.

M&L for 20mm dia mild steel curtain rod with PVC coating, fixed with MS hooks/ brackets, finials/side brackets (both side) including knobs, complete all as specified and directed.

MADAN LAL SHARMA AND SONS (BID ID -3290117)

SINGH CONST CO (BID ID -3289702)

KUMAR CONSTRUCTION CO (BID ID -3289750)

M/S JANDIAL ENTERPRISES (BID ID -3289978)

M/S GURU DEV BUILDERS (BID ID -3290039)

RAMAN KUMAR (BID ID -3290089)

HANS RAJ SHARMA (BID ID -3290154)