CO COMMUNITY BATHROOMS NEAR GRAVEYARD WANI MOHALLA RAKH WACHOO SUKHNAG BUDGAM (UTCAPEXRDDSS2526100559

Earth work excavation by mechanical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift up to 1.5 m, as directed by Engineer-in-Charge

Providing and laying of stone soling hand packed complete Job including by MT incl. plum.

P/L in position of cement concrete (1:3:6 ) stone aggregate 20mm nominal size aggregate excluding the cost of centring and shuttering all work upto plinth level (1:3:6 ) stone aggregate 20mm nominal size aggregate

P/L in position of Reinforcement cement concrete (1:1.5:3) stone aggregate 20mm nominal size aggregate excluding the cost of centring and shuttering all work upto plinth level stone aggregate 20mm nominal size aggregate

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing I position and binding all complete upto plinth level : Mild steel and medium tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. Retaining walls, return walls, Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping and removal of form for edges of slabs and breaks in floors and walls under 20cm wide

S/s and laying of GSB filling in rooms at site of required size including all complete job

Brickwork with FPS brick in 1:6 mix in superstructure above plinth upto floor five complete

Extra for brickwork in superstructure above plinth level upto floor V level by mechanical means

Half brick masonry with common burnt clay (non-modular) bricks of class designation Cement mortar 1:3 ( 1 cement : 3 coarse sand)

Providing and fixing aluminum work for doors, windows, ventilators and partitions (frame) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Powder coated aluminum (minimum thickness of powder coated 50 microns). Incl. shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, 4mm Thick ACP Sheets & all other accessories (Handles, Tower-Bolt, Al-Drop etc.) - (14-Guage Material)

Providing/ fixing in position Pre cast Cement concrete Jali1:2:4: mix reinforced with 6mm dia mild steel wire incl cement mortat of mix 1:3mix

12mm thick cement plaster 1:6 (1cement:6fine sand)

P/A 12 mmPlaster of 1: 4 (1 cement: 4 fine sand) mix finished with neat coat of Cement Slurry.

P/L cement concrete flooring (1:2:4) mix etc complete 50 mm thick with 20mm nominal size stone aggregate

P/A white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete

Finishing exterior walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade two or more coats @3.84kg/10sqm.

Providing and fixing 1st quality ceramic glazed tiles of size 300x600mm conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Providing and laying vitrified floor tiles in sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Carriage of Stone aggregate below 40mm Avg lead 12 Km

Carriage of Sand Avg lead 12 Km

Carriage of Bricks Avg lead 12 Km

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.

P/F of PPR fittings of standard quality and make(c-grade) including jointing/ testing complete PPRelbow,union,tee,socket,etc 20mm

Tank nipples 20mm dia

Providing and fixing of PPR gate value with C.I wheel of approved quality (ISI mark) 25mm

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Tees's, Elbows etc.) jointing/testing complete 100mm dia.

P/F of following PVC pipes & fittings of standard quality & make (B type) Prince or equivalent incl.including PVC waste fittings (Collars, Tees's, Elbows etc.) jointing/testing complete 75mm dia.

P/F PVC fittings of standard quality type floor trap 100mm

Tee 100mm

Reducer 100mm to 75mm

Constructing masonry Chamber 300x300x500 mm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 19.26.1 With common burnt clay (non modular) bricks of class designation 7.5

P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc "B type" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest)

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and rackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer incl white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

P/F of looking mirror of superior glass (of approved quality), rectangular size ( 450x600)mm with plastic moulded frame of approved make and shade with 6mm thick hard board backing.

P/F PVC waste pipe for counter basin/ wash basin (32mm)

CP Brass Bib Cock 15mm

P/F CP Floor Grating (100mm)

P/F CP Angle valve 15mm Nominal Bore concealed type Jaquar or Equivalent.

P/F PVC water storage tank Tripple layer Sintex or equvalent make

S/L of precast RCC rings of 6inch width and 3'dia and 1.25 inch thick for soakage and septic tank incl earthwork in excavation, RCC cover in M20 grade with reinforcement for soakage pits & , incl. disposal of excavated earth beyond the site, disposed earth is to be leveled and neatly dressed incl. dewatering of trenches during execution. (if required).

P/F of lighting points as well as lighting circiut incl. point wiring through conduits with 1.5 Sqmm Multi Standard copper wire of approved make for light points incl. cutting chases and making good the wall, cost of 6 amp switch, conduits, switch pannel, incl. resurfacing of wall with POP complete job.

Provsion for CIB, Photographs and other unforeseen items