REPAIRS TO PVC FLOORING TILING WORKS ALUMINIUM WOODEN JOINERY RAILING CEILING WORK TILING PLASTERING PLUMBING AND SANITARY WORK IN SOK OFFICE INS ABHIMANYU NAD DSC COMPLEX JETTY BLDGS MES BLDG NAI FODC NBCD HARD CHUKAR AT NAVAL STATION KARANJA

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of brick work or stone/boulder, masonry built in cement or cement lime mortar including rubbish off the premises complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

All as per SI No. 4 herein before but except stone complete all as specified and directed. Note:- stone obtained from SI No. 1 shall be reused.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of RR wall brought upto courses, maximum depression n.exc. 40mm in granite or trap stone complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M & L for rendering 20mm thick plaster in cement mortar (1:4) in two coats (15mm thick backing coat and 5 mm thick finishing coat) on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L applying 3mm thick wall care putty on new/old plastered surface and prepare the smooth surface with sand paper and applying two coats of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge

M & L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint on one coat of primer complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc.complete all as specified and as directed.

Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick second class factory made hard wood plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

S&F Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a).

S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed.

S&F butt hinges size 100 extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21 complete all as specified and as directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.(Make : Rajshree,Plastiwood, Sintex or equivalent as approved)

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “c” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.

M&L Painting to new wooden surfaces including prepration applying one coat of pink primer and two coats of synthetic paint.complete all as specified and directed by Engineer-in-Charge

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice lock in existing postiion with and including new screws including refixing the door shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and including new screws including refixing the window shutters in same opening complete all as specified and directed. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S & F aluminium window/ventilator/door in lieu of wooden made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, door stopper, tower bolts, Star lock, hooks & eyes peg stays, rubber beading and handles including all connected items , complete all as specified and directed. NOTE :(i) Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors. (ii) Rubber beading shall be measured and paid sepearately.

S&F 4mm thick plain sheet glass of ordinary quality for aluminium windows including rubber beading etc all as directed and specified.

S&F in repairs aluminium anodised grill and frame of approved make and pattern of 10mm thick fixed including F frame for aluminium windows all as directed and all as specified.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed. Make- Deco grill or equivalant

S & F aluminium body (extructed section) door closer, hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S & F in repair aluminium body (extructed section) door closer, hydraulically regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. complete all as specified and directed by Engineer-in-Charge

S & F in repair floor stopper 150mm length of aluminium alloy body and tongue, anodised, wth hard drawn steel spring, fixed in floor.complete all as specified and directed by Engineer-in-Charge

S & F in repair 75mm size 4 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturer's instruction all as specified and directed.

S&F in repairs mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and directed.

S & F in repair water closet seat cover, closed pattern with flat, bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair vitreous china urinal partition white of size 310 x 700mm urinal partition slabs, terminating about 40 cm above floor complete all as specified and as directed.

S & F in repairs soap dish (Prayag Cat No.BA-05) or equivalent fixed on wall complete all as specified and as directed.

S & F in repair sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repairs corner glass shelf 300mm (with brass brackets) (Prayag Cat No.BEA-44) or equivalent fixed on wall complete all as specified and as directed.

S & F in repairs Hand shower (Health Faucet) with 1m long Flexible tube & wall hook (Beaded Tube) (Prayag Cat No BEA-85) or equivalent and fixed complete all as specified and as directed.

S & F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S & F in repairs PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs 15 mm CP bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge

S&F in repairs stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge

S&F in repairs flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed by Engineer-in-Charge

S&F in repair 15 mm bore Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with long screws shanks and nut complete all as specified and directed.

S&F in repairs water closet squat pattern with vitreous china white Ist quality water closet Orissa pattern size 580x440 with integral foot rest and cost iron for S trap complex complete all as specified and directed.

S&F in repairs wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F for false ceiling with Armstrong XL 24 mm grid system of grid size 600x600mm with 14 mm thick ceiling board of RH-90 of Armstrong. Grid shall be suspended from ceiling using 4 mm dia pre straighten GI wire with 6 mm nylone rawl plug & screws at 1200 mm intervals complete all as manufacturers instructions and as directed.

S & F Aluminium anodised snap grid frame work and the size of grid 605 x 605mm for false ceiling. Complete all as specified and directed by Engr-in-Charge

S &F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M&L providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, Complete all as specified and directed by Engr-in-charge.

S&F 10 to 12mm thick plaster of paris ceiling plain or stepped designed fix in ceiling with and including grid made out of angles and tees of one mm thick G I sheets fixed at not more than 45Cm centre to centre in both directions. GrId secured by vertical tai of G I sheet angle at not more than 1.2m centre to centre in both directions. The veritical tai of GI sheet angle shall be fixed with M S dash through fastners of 8 mm dia. The ceiling is to be provided at different profiles like curved, flat, sunk and or raised mouding, the joints shall be filled with plaster of paries complete all as directed by Engineer-in-Charge.

S & F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and directed

S & F in repairs 14mm thick ceiling board of size 600mm x 600mm of RH-90 of Armstrong false ceiling complete all as specified and directed.

M&L Applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces ofwall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M & L for Granite tile of 20mm thick on vertical surfaces such as skirting/dado, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 15mm thick back coat in CM (1:6) complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar beddingcomplete all as specified and directed.

M & L for Non skid ceramic (Durastone heavy duty) tiles size 300mm X 300mm X 8 to10 mm thick (square or rectangular) polished setting and jointed with cement slurry laid as in floors over & including 15mm thick bedding of layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed.

M & L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20 mm thick screed bed in cm (1:6) for laying floor fineshes complete all as specified and directed.

M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for Glazed ceramic colour tiles 300x200x7 mm thick as in skirting,dados, risers to steps,etc,set and jointed in neat cement slurry and pointed in colour cement to match tiles, over and including 10 mm thick rendering or bedding layer in cement mortar 1:4 complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes complete all as specified and as directed.

S&F Vitrified ceramic coloured tiles 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed by Engineer-in-Charge

S&F Virified ceramic coloured tiles 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles. Complete all as specified and directed by Engr-in-charge.

Machine cut kota slab fooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes omplete all as specified and directed by Engineer-in-Charge

Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed by Engineer-in-Charge

M&L Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 15mm thick screed bed of 1:4 cement mortar complete all as specified and directed by Engineer-in-Charge

M&L dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed by Engineer-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts, complete all as specified and directed by Engineer-in-Charge.

M&L 6mm thick asbestos cement one piece plain angular ridge for corrugated or semi corrugated sheets fixed with 'L' type or 'J' type or cranked hook bolts complete all as specified and directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed by Engineer-in-Charge

S&F pre-painted galvatume aluminium zink coating GI based corrugated steel sheet .50mm tgick of an colour having tensile strenth of 550 Mps as in roof covering /clading to wall fixed with self taping screw complete all as specified and directed.

Complete removal of existing water proofing treatment of any description in any position including damaged plaster/ PCC padding if any and cleaning, wire brushing, watering, removal of debris upto 1500mtr distance as directed by Engineer-in-charge complete all as specified and as directed

M& L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of uniform thickness 40mm , top surface of plain concrete padding shall be finished even & fair w/o using extra cement including WPC by weight of 3% of total cement content complete all as specified and as directed. (Note : WPC will be measured and paid separately under relevant item)

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane including Ten years guarantee on prescribed form complete all as per particular specification , manufacturers instructions and as directed by Engineer-in-Charge.

Supply only integral water proofing compound

Complete removal of existing PVC tiles /sheets, of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500mtr distance complete all as specified and as directed

S&F for PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors all as specified and directed.

Taking up or down steel water tubing and connection complete 15 mm bore complete all as specified and directed by Engineer-in-Charge

Taking up or down steel water tubing and connection complete 20 mm bore complete all as specified and directed by Engineer-in-Charge

S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc complete all as specified and directed by Engineer-in-Charge

S&F steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge

S&F in repairs rotational moulded PVC water storage tank 1000 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-Icomplete all as specified and directed by Engineer-in-Charge

S&F in repair rotational moulded PVC water storage tank 500 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment in Grade 'A' Fe 410-W. complete all as specified and directed by Engineer‐in‐Charge

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L PCC 1:2:4 type B2 using (40mm graded aggregate), 100mm thick as in flooring complete all as specified and directed.

M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection complete all as specified and directed.

S&F in repair Vitreous china boul urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe of Hindware or Cera mark complete all as specified and directed.

Dismantling of any size of stainless steel railing & remove from site complete all as specified and directed.

S & F Stainless steel hand railing with post as per design made out SS304 complete all as directed by Engineer-in-Chage

GB construction

VARDHAMAN CONSTRUCTION COMPANY

ECOBUILD

Unique Associates

Pheonix Engineers & Contractors

M.K Enterprises