Supply of furniture (Chair) for department of Genetics in MDU Rohtak

Amount

Providing and supplying visitor chair with ergonomic design for user comfort. The seat shall be made of 9mm thick hot pressed plywood upholstered with high resilience polyurethane foam 25mm thick having density 40kg/m3 with leatherite tapestry 0.8mm thick and 535 GSM and the back shall be made of double layered moulded hot pressed plywood (6+9)mm thick upholstered with high resilience polyurethane foam 19mm thick having density 23kg/m3 with leatherite tapestry 0.8mm thick and 300 GSM. The seat and back shall be arrested together with MS/CRCA pipe frame and the armrest shall be used polypropylene arm mounted on pipe frame completely joint with seat and back. The frame structure shall be supported by four legs made up of MS/CRCA chrome plated round pipe of dia.25.4mm with 1.6mm thick. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The seat size shall be 450+10mm (D) X 440+10mm (W) and back size shall be 415+10mm (W) X 405+10mm (H) from seat. Over all height shall be = 835±10mm. Complete in all respect to the entire satisfaction of engineer in charge. Make:- Geeken, Durian, Wipro

Providing and supplying medium back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 15mm thick hot pressed plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m3 and the back shall be made of inserted pipe frame padded with high resilience polyurethane foam 19mm thick having density 23kg/m3.The same shall be upholstered with leatherite tapestry 0.8mm thick and 535GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support. The chair shall be supplied with chrome plated armrest with PU top completely joint with seat and back. The chair shall have swivel tilt360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The pedestal should have five legged MS CRCA chrome plated having pitch circle dia. 650mm fitted with 05 nos. twin wheel castors which shall be made of injection moulded black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 tested to perform 98,000 cycles with 250 lbs load. The seat size shall be 480 ± 10mm (W) X 490±10 mm (D) .Complete in all respect to the entire satisfaction of engineer in charge. Make:- Geeken, Durian, Wipro