WBHD/AE/ESD-V/e-NIT-09/25-26

Dismantling the existing wiring and mending good the damages as per G.S

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 40A, D2P, Make- L&T/ABB/legrand

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. 2 Way

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+10Way, Make- L&T/ABB/legrand

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 40A,DP L&T/ABB/SEIMENS

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. 6-32 A, SP, Make- L&T/ABB/Seimens

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand-Finolex/Gloster/RR Cable) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed (Anchor) on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 nos. “Ph & N” copper bar incl. bakelite/Perspex top cover 3 mm thick and incl. 175x100x65 mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed Average run 6 mtr.

Do----Do-----------On Board

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.)

Supply & Fixing 230V 400 watt electronic type fan regulator (Anchor Step type)

Supply & Fixing 240 V, 20 A, plug socket with separate 20 Piano Key type switch (Brand-anchor) on sheet metal switch board embedded in walll incl. S& F 150x100x65mm MS(16SWG) switch board and bakelite/perspex top cover of 3 mm thick by Brass screws after making housing for switch by cutting bakelie/ perspex cover and making necessary connection as required

Supply & Fixing 240 V, 20 A Piano key type switch (Brand - Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240V , 20 A plug socket ( Brand approved by EIC) without plug top and switch on sheet metal switch board incl, S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

S&F 240 Volt 2 nos, 6 Amps Piano Key type switch and 2 nos, flush type 6 Amps, 5 pin plug socket incl S & F M.S switch board of size 175 mm x 100 mm X 32 mm incl S & F bakelite/perpex switch board cover 3mm thick 1 no for each room.

Supply & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl S&F HW board.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand-North-West) 20 A Modular Switch type DP MCB (C-Curve)and 4 Modul GI Modular type switch board with 4 Module top cover plate flushed in wall inc. S& F switch board and cover plate and make necy Connections with PVC Cu wire and earth continuity wire etc

Supplying and Drawing 1.1 K.V single core stranded 'FR'PVC insulated & unsheathed single core stranded copper with (Brand-Finolex/Gloster/Havells/RR Cable of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy.connction as required. 2x84/0.3(6 sqmm)+1x56/0.3(4 sqmm) ECC (Main switch to SPN DB)

2x56/0.3(4 sqmm)+1x36/0.3(2.5 sqmm) ECC (For A.C Point)

2x36/0.3(2.5 sqmm)+1x22/0.3(1.5 sqmm) ECC (For Power Point)

3x22/0.3(1.5 sqmm)

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Cutting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts,nuts, washers,cable lugs etc. as required and mending good damages No. 3 SWG

Add GST @18%

Add LW Cess @1%

Please Enable Macros to View BoQ information