Providing new 3nos of additional 11kv PCVCB switchgear for load bifurcation at 66/11kv sub-station, Garaga in 220kv RS & SS division, Chitradurga including Supply of Equipments /Materials, Erection (Including Civil Works), Under Partial Turnkey Percentage Tender Basis, (Excluding the Major Materials Such As Switchgears Will Be Supplied by KPTCL) Testing & Commissioning & other allied works

Providing new 3nos of additional 11kv PCVCB switchgear for load bifurcation at 66/11kv sub-station, Garaga in 220kv RS & SS division, Chitradurga including Supply of Equipments /Materials, Erection (Including Civil Works), Under Partial Turnkey Percentage Tender Basis, (Excluding the Major Materials Such As Switchgears Will Be Supplied by KPTCL) Testing & Commissioning & other allied works

11KV ISOLATOR a)11kV Isolator Double break, 400 A Dwg no.BESCOM/GM/QS and S/22 dt:24.11.2018

b)11kV 400 A, Special roaster GOS

Conductor ACSR a) Drake ACSR

b) Coyote ACSR for cross bus and line formation

PVC insulated copper control cable with Lugs/ferrules as per specification. a)19core x 2.5 Sq.mm

b) 4 core x 6.0 Sq.mm

c)2 core x 6.0 Sq.mm

e) Providing Cable glands, copper lugs, Aluminum cable naming plates

f) Supply of ferrules Alphabets- A to Z Numerals- 0 to 9 with other notations

Hardware Clamps a)Bolted type tension clamp for Single Drake ACSR 70/90KN, 16mm

b)Bolted type tension clamp for Single Coyote ACSR 70/90KN,16mm

c)C-type Wedge connectors for Coyote to Drake ACSR

d)C-type wedge connectros for Coyote to Coyote ACSR

e)T-Clamps suitable for Single Coyote to Single coyote ACSR Conductor

f)Pad Clamps for Coyote

g)PG Clamps for Coyote

h)CT clamps for single coyote ACSR conductor

i) D shackles (16mm)

j)GI Eye bolts of size 5/8 x8 length

GI bolts and nuts of different sizes

90KN Disc Insulators of 1 unit suitable for coyote ACSR

C100x50 4 mtrs long GI C channels 0.036MT 0.0018 MT bolt nuts/4mtr long piece)

Assorted angles different sizes

RCC Pole of 9.5m long WL 300kg

RCC Pole GI clamps

Items like insulation tape,beads, Clamps,Welding, PVC Pipe with bends, drilling etc and rounding off

SCADA integration Multi Function Transducer MFT and Fixing and wiring of MFT KPTCL

8 Channel 110V Opto Coupler and Fixing and wiring of Opto Coupler.

Copper control cable 4x4 sqmm for CT termination.

Copper control cable 4x2.5sqmm for PT termination

Signal cable and 1 run for DI) (between C and R panel to RTU panel) and Laying and termination of DI/DO/Communication Cables

Control control cables 10C x 1.5 Sq mm multistrand, conforming to KPTCL specification (between CandR panel to RTU panel) and Laying and termination of DI/DO/Communication Cables

ERECTION OF 11 KV PCVCB Breaker Erection,alignment and fixing to the foundation,outdoor 11kV switchgear panel/unit including movement from the point of unloading to the point of erection a) 11kV Outdo...

Wiring and Assisting in testing and commissioning b) 11kV Outdoor Switchgear

c) For additional 11KV panel (indoor type)

Laying of control cables

Erection of GOS sets b) Erection of 11KV Isolator Double break 400 A, 25KA

c) Erection of special Roaster GOS 400A, Single break

BUSBAR FORMATION b)Main bus/ cross bus(all three phases in segment) of using Coyote single/Double conductor with fixing of insulator spares,levelling of string conductors to the required height above ...

c) Erection of RCC Poles

d) Erection of C100x50 4 mtrs long GI C channels (0.036MT/Beam)x36Numbers =1.296 MT plus (0.0018x36=0.0648)=1.3608 MT

Supply and Grounding of GOS with 50X6mm GI flats and conneccting equipment to the earthmat, flats and ground pit. Each point of earthmat with all forms of works like bending,twisting ,drilling of hole...

Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron wel...

Supplying and providing 450mm dia 450mm hight 1.5 to 2 thick hume pipe collar(non pressure type) for earth pits including all lead and lifts etc.,

SCADA integration Multi Function Transducer (MFT) and Fixing and wiring of MFT KPTCL

8 Channel 110 V Opto Coupler. KPTCL and Fixing and wiring of Opto Coupler.

Copper control cable 4x4 sqmm for CT termination.

Copper control cable 4x2.5sqmm for PT termination.

Signal cable Armoured Copper 10C x 0.5 Sq mm multistrand (2 runs 1 run for MFM and 1 run for DI) (between CandR panel to RTU panel)and Laying and termination of DI/DO/Communication Cables

Control cables 10C x 1.5 Sq mm multistrand, conforming to KPTCL specification (between CandR panel to RTU panel) and Laying and termination of DI/DO/Communication Cables

Configuration of RTU and Engineering along with validation of data at SLDC.

Miscellaneous and rounding off (like welding, drilling,cutting etc)

Providing MEI make PCVCB foundation at 66/11KV MUSS Garaga

Providing MEI make PCVCB foundation at 66/11KV MUSS Garaga