Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.5 LAccepted-AOC NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹46.7 L+₹25,705.50 (0.55%)Rejected-Finance H NO 90 VILLAGE REWLA KHANPUR PO NAJAFGARH NEW DELHI 110043 | NEW DELHI | WEST DELHI | DELHI | 110043 | L2 | Rejected-Finance other than L1 | |
| 3 | L3₹47.2 L+₹69,185.50 (1.49%)Rejected-Finance WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance other than L1 | |
| 4 | L4₹47.9 L+₹1.4 L (3.01%)Rejected-Finance H NO 496 SECTOR 10 GURGAON 122001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L4 | Rejected-Finance other than L1 |
Tender Value
₹58 L
EMD Value
₹1.1 L
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE New Delhi
HQ CWE New Delhi Rao Tula Ram Marg Delhi Cantt 10
SPL REPAIR OF BLDG No.P 330 AT BANA SINGH ENCLAVE AND SPL REPAIR TO BLDG No. P 478 (WKRS REPAIR BAY) OF 227 FD WKSP UNDER GE (SOUTH), DELHI CANTT 10
2024_MES_647689_1
CWE-ND/29/2023-24
Open Tender
Civil Works
Item Rate
180 days
Delhi
Please refer Tender documents.
10 documents required · 10 mandatory
₹1,000
GE South Delhi Cantt
₹1.1 L
3 Jun 2024
23 Mar 2024
1 May 2024
23 Mar 2024
29 Apr 2024
15 Apr 2024
Amount
Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre, complete all as specified and directed.
M&L for light shade vetrified tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for light shade vetrified tiles 8 to 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
M&L for joint free glazed ceramic coloured tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, complete all as specified and directed by engineer-in-charge.
M&L for backing coat/ plaster 10 mm thick on brick /concreate work in CM 1:4 surfaces to receive tiles, complete all as specified and directed.
Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and directed.
M&L for granite (of any type) work, 20 mm thick (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and over and including 20mm thick screed bed cement screed bed 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
M&L for machine cut pre-polished kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed bed(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.
M&L for pre-polished kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over and including 10 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.
Demolition of reinforcement cement concrete of any discription and in any position, including cutting of reinforcement from adjoining RCC component to faciliate demolition, complete all as specified and directed.
M&L brick work with sub class `B' bricks using old size brick straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6, complete all as specified and directed.
M&L brick work with sub class 'B' bricksusing old size brick strainght or curved on plan to any radius in half thick in CM 1:4 brick wall built in cement mortor, complete all as specified and directed.
Taking up or down steel tubing and connections 15 mm bore of pipe, complete all as specified and directed.
Taking up or down steel tubing and connections 20 mm bore of pipe, complete all as specified and directed.
S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed.
S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed, complete all as specified and directed.
M&L for Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, including floats valve valve etc complete all as specified and directed.
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.
S&F ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20mm bore and fixed, complete all as specified and directed.
S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and directed.
S&F PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and directed.
S&F in repair 15 mm angle type stop valves, cast copper alloy , chromium plated , fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union, complete all as specified and directed.
S&F in repairs bib tap (quarter turn), brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and directed.
S&F in repairs mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings, complete all as specified and directed.
S&F in repairs chromium plated grating with 100mm dia of approved make includingh fixing with 1:4 CM to floor or nahni trap etc., complete all as specified and directed.
S&F in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc., complete all as specified and directed.
S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe, complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP, complete all as specified and directed.
S&F in repair stainless steel sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
S&F in repires brass chromium plated health faucet alongwith 1.00 to 1.50 meter good quality(grade -304) SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and directed.
S&F in repair 1st quality vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and directed.
S&F in repair, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level, complete all as specified and directed.
S&F in repair 1st quality vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed.
All as per item no - 39- here in before but exceeding 1.50 sqm and not exc. 4.00 sqm each, complete all as specified and directed.
Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and directed.
S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including necessary concreate /cement martar fillings , etc, complete all as specified and directed.
S&F factory made solid PVC chowkhat or door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19 mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020), complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.
S&F 35 mm thick Factory made second class hardwood plain,framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F for 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhat complete all as specified & directed. Note:- Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc. complete are deemed to be included in the unit rate qoated by contartor.
S&F stainless steel butt hinges, size 100 mm(grade-302) complete, complete all as specified and directed.
S&F stainless steel barrel tower bolts, 150 mm long, (grade-302)complete all as specified and directed.
S&F stainless steel handles, 150 mm long, complete(grade-302) all as specified and directed.
S&F stainless steel sliding door bolts 250mm long(grade-302) with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts, complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed.
M&L powder coated aluminium anodised three way track sliding windows of min frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter min size 40 mm x 18mm (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 100 mm aluminium handle with spring lock including stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples including 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads, complete all as specified and directed. Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.
S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings and including stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified and directed.
M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.
M&L for 18mm thick wood plastic composites (WPC) board, fixed with screws as in cupboard/ wardrobe/ almirah shutter including all necessary fittings and fixtures like nickle plated clip hinges, knobs etc complete all as specified and directed. Note: (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, and CP plate clip hinges deemed to be included in the quoted rate.
S&F in repair drapery curtain rods, stainless steel 25 mm dia of grade -304 with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings etc., complete all as specified and directed.
Dismantling wrought iron or mild steel/ cast iron work of any description, complete all as specified and directed.
M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed.
S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.63mm nominal dia of wire and average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and directed.
M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm, complete all as specified and directed.
S&F stainless steel peg set (grade-304)of five fixing with wall, complete all as specified and directed.
S & F in repair stainless plate rack made of 1.00 mm thick stainless steel sheet of size 750 mm x 750 mm x 250mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre and sample kept in GE's office complete all as specified and directed .
S&F in repair stainless steel barrel tower bolts of grade -304, 150 mm long, complete all as specified and directed.
S&F in repair stainless steel handles, of grade -304, 150 mm long, complete all as specified and directed.
S&F in repair stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts, complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings, to be finished even and smooth without using extra cement complete all as specified.
M&L for preparation of newly plastered surfaces of wall and applying a coat of wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over and including a coat of primer, complete all as specified and directed
M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) complete all as specified and directed.
M&L for preparation of newly plasered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.
M&L for complete removal of existing treatment from internal surfaces of wall by electrically operated grinder, washing and filling of holes with filler material and applying wall care putty on whole wall surface to achieve smooth, even and uniform surface including grinding with sand paper and levelling the surface and than applying two coat of oil bound distemper on white or tinted surface over and including a coat of primer, complete all as specified and directed.
M&L for preparation of old surfaces of wall and applying two coats of white wash, complete all as specified and directed .
M&L for preparation of old surface of ceiling and applying one coats of white wash, complete all as specified and directed.
M&L Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified and directed.
Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar, complete all as specified and directed.
Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg including necessary scaffolding arrangement complete (whether full thickness removed or only a part there of) and removing rubbish from MOD land or as directed, complete all as specified and directed.
M&L for cutting out craks to V-section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete all as specified and directed.
M&L for Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) avg 50 mm thick as in roof pedding , finished even and smooth without using extra cement ,including 10 mm thik plaster on top concrete surface up to three stories bldgs, complete all as specified and directed.
S&F APP based polymeric water proofing membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/Sqm laid over and including applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per Sqm by torch application including cleaning of surface complete all as per approved manufacturer's instructions complete all as specified and directed . Note:-The water proofing treatment shall be carried out by manufacturer or their authorised applicators as per manufactures instruction and as directed .
M&L for cement concrete type B1 - 1:2:4 (using 20mm graded stone aggregate) in roof kerbs or mud stop rounded or chamfered on edge etc., complete all as specified and directed.
Demolition of cement concrete in floors of any description and in any postion, complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.
S&F 110 mm dia UPVC pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed.
S&F 75 mm dia UPVC pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and directed
S&F 75mm UPVC (SWR) bends type ‘B’ (any radius), complete all as specified and directed.
S&F 100mm UPVC (SWR) bends type ‘B’ (any radius), complete all as specified and directed
S&F in repair UPVC ‘P’ or ‘S’ trap including jointing with solvent cement, dia of outlet 100mm, complete all as specified and directed
S&F 75mm UPVC (SWR) branch piece, single (single Y) equal or unequal provided with oval access doors, complete all as specified and directed.
S&F in repair UPVC floor/ nahani trap including jointing with solvent cement, dia of outlet 75mm, complete all as specified and directed
S&F in repairs 125mm x 100mm salt glazed stone ware gully traps square & round mouthered trap 'P' including cast iron grating and fixed, including necessary excavation and earthwork, concrete in bed, surrounds, kerbs etc., and jointing to drains in CM 1:1, complete all as specified and directed.
Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed .
S&F 110 mm UPVC pipes Type 'A', single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls, complete all as specified and directed.
S&F 110mm UPVC (SWR) Bends/Tee type ‘A’ (any radius), complete all as specified and directed.
S&F stack clamps 100mm bore made out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed
S&F stack clamps 100mm bore made out of 75 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed
Demolition of cement concrete (un reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base, complete all as specified and directed.
M&L for 60mm thickness machine pressed pre-cast concrete interlocking paver block any size and shape confirming to IS 15658-2006, M-30 grade with grey cement and no pigment, laid over and including 40mm thick sand cushion and including joints filled with sand, complete all as specified and directed.
M&L for udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F 100mm UPVC (SWR) branch piece, single (single Y) equal or unequal provided with oval access doors, complete all as specified and directed.
M&L for providing and injecting chemical chlorpyrifos emulsifiable for post constructional anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes, complete all as specified and directed.
M&L for anti termite treatment of soil under existing floors using chemical chlorpyrifog emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floors, complete all as specified and directed.
S&F in repaires 6mm thick glass corner shelf fancy type with railing and fittings complete of size 25cm x 25cm of best quality (as per sample approved by Engr-in-charge), complete all as specified and directed.
S&F in repaires brass chromium plated soap dish 150mmx150mm, of any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.
M&L for 15mm thick rendering with ready mix plaster on brick or concrete surfaces finished even and smooth without using extra cement mixed with and including by adding permeability reducing polymer @ 250gm/sqm by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc.
M&L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulssion, white or tinted over and including one coat of primer, complete all as specified & directed.
M&L for providing and applying a bond coat of Latex: Water : cement - 1:4:6 with latex consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing, complete all as specified & directed.
M&L for 50 mm thick (avg) guniting in patches on to the required area on RCC parapets walls, columns, beams, stairs, lintels, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and sand mortar 1:3 (1 cement : 3 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor kp-100 or equivalent grade over reinforcement wherever necessary providing and tying in position with 75mm x 75mm, square size with 2.946mm dia mild steel wire welded mesh over treated surface ready to receive grouts, curing for 10 days etc, complete operation all as directed including labour charges hire for all tools and plant machineries cost of consumables, scaffolding all types of protective equipments, plant floors, pipelines, vessels, materials etc. Note: (i) All concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allow to dry. To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions. (ii) When polymix coating is in tackey condition guniting is to be done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction. Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized deale or equivalent. (iii) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as directed
Demolition of brick work built in cement mortar including all quoins , arches , pillars , etc. of any description complete all as specified.
Material & Labour for brick work with sub class 'B' Bricks using old size breick straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 as in manholes/drain etc complete all as specified and directed.
M&L for complete removal of existing treatment on walls by electrical grinder/ sand paper/ steel patti thereafter prepartion of walls by filling of holes and cracks with wall care putty, to achive smooth surface for external surface as required area of surface and applying two coats of Cement base paint complete all as specified and directed.
M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and diredted.
M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.
M& L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position opening of shutters exc 3.5 m and n.exc 6 m complete all as specified and directed.
S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters,opening of shutters exc 3.5 m and n.exc 6 m complete all as specified and directed.
S&F in repair Steel rolling shutters, 1.25 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated , complete: push pull or manual type.
S&F in repair made stainless steel gutter 2 to 3 mm thick of trapezoidal shape with necessary arrangement including cut out with sleeves piece for 100 mm dia pipe of 100 mm long piece of circular shape supported on MS angle frame work complete all as specified and directed Note : The M S frame work will be circular will be measured and paid separately ) gutter fixed on 12 m height buildng.
M&L 6mm thick multi layer coloured polycarbonate plastic transulancent sheeting fixed with aluminium strip and gasket and self tapping screws on roof trusses on vertical support /walls complete including taking down all as specified and directed.
S&F, Sheet glass 4 mm thick , ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane complete all as specified and directed .
Taking down carefully the old U/S Copper point wiring (light, fan, socket or power) complete Fitting such as switch, ceiling roses,pendants,socket, regulators , all type light Fitting, security light Ding Dong Bell , etc and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area ie with OBD/colour wash/white wash as the existing finish complete all as specified and directed.
M&L for point wiring complete with single core multi strand copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including concealed PVC conduit medium grade and Modular sunken pressed steel terminal box 2 mm thick required size including modular plate and modular flush box in different module with all accessories including 1.5 Sqmm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly for one light /fan/Bell point/security light controlled by one way switch complete all as specified and directed. Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete.
All as per item No 131 here-in-before One socket outlet 5 Amps on same board with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed.
All as per item No131 here-in-before One socket outlet 5 Amps on independent board with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed.
All as per item No 131 here-in-before One socket outlet 15 Amps on independent board with cables 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing complete all as specified and directed.
All as per item No131 here-in-before One AC point on independent board with cables 4 Sqmm size for phase and neutral and 4 Sqmm for earthing complete all as specified and directed.
All as per item No 131 here-in-before One light point controlled by two 2-way switch 230 volts with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing complete all as specified and directed.
M&L for point wiring inside repair bay workshop on angle/truss surface upto 15 meter height complete with single core multi strand copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including suface PVC conduit Heavy grade with all fixing accessories including 1.5 Sqmm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and directed.
M&L for point wiring complete with One industrial socket outlet, 32 amps,3 phase on independent board with 5 core multi strand copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including suface/concealed PVC conduit Heavy grade with all accessories including 4 Sqmm 5 core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and directed by Engr-in Charge.
S & F Switch Modular type switch, 6 A,1- way SP switch with finger proof terminal complete all as specified and directed.
S & F modular type 2/3 pin combined shuttered type 6A socket complete all as specified and directed.
S & F Switch Modular type switch, 6 A, 2- way SP switch with finger proof terminal complete all as specified and directed.
S & F Switch Modular type switch, 16 A, 1- way SP switch with finger proof terminal complete all as specified and directed.
S & F modular type 2/3 pin combined shuttered type 16 A socket,complete all as specified and directed.
Supply & Fix Modular AC box complete with MCB 20-32 Amp, 230 volts AC complete all as specified and directed
S & F Industrial Plug and Socket Set 3 Phase 5 Pin 32 Amp,415 volt having protection IP-66 complete all as specified and directed.
S&F of ceiling rose surfaces bakelite minimum size 65x50mm with two/ three terminals complete all as specified and directed .
S&F electric bell ding dong AC, 230 volts single phase complete all as specified and directed.
S&F Bell push modular type 1M 5/6 Amp complete all as specified and directed.
S&F surface mounting LED Integrated Aluminum Batten luminaries Polycarbonate co-extrusion tube for Not less than 18 Watt LED light housing. Fixture should have minimum system lumen of 2000lm & minimum efficiency at system level >=115lumens/Watt, life of fixture 50K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240V AC An operating voltage Range of 140-270V including all connection up to ceiling rose complete all as specified and directed.
S&F surface mounting LED Integrated Aluminum Batten luminaries Polycarbonate co-extrusion tube for Not less than 09 Watt LED light housing. Fixture should have minimum system lumen of 1000 lm& minimum efficiency at system level >=115lumens/Watt, life of fixture 50K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240 V AC. An operating voltage Range of 140-270V including all connection up to ceiling rose complete all as specified and directed.
Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.
S&F inverter LED lamp 12 Watt rechargeable for home, cool daylight, Base complete all as specified and directed
Supply and fixing round shape 12 watt 220 volts AC surface type with 1100 lumen output ,efficiency not less than 100lumen/watt ,Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.
S & F of Decorative wall light mounting including for LED Lamp upto 15 Watt complete with all connections all as specified and directed. Make : HavellsCat Part No LHF0ECE1TZ10014/ HalonixCat Part HLWB-01-B22/ Philips model - Comet
S & F 45 Watt security light high efficiency long life LED module with LENS type LED package mounted on MCPCB, Fixture should have minimum efficiency at system level >=110 lumens/Watt, integral SMPS based constant current electronic LED driver with THD<10% surge voltage protection of > 5.0 KV, CRI>80, PF>0.95,CCT 4000-6500K and other safety tests as per IS:15885( part-2/sec-13),IP 66 protection high efficiency polycarbonate cover with integrated lens housed in pressure die cast aluminim alloy heat sink for effective thermal management strudiness excellent corrosion resistance separate optical and control gear compartment & Top opening for easy maintanance suitable for side entry wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible copper cunductor cable of appropriate size and including 1.5m long bracket having 40mm diameter light grade GI pipe including GI clamp nuts bolts & washers with two coats of synthetic enemal paint over a coat of oxide primer complete all as specified and directed.
Supply & Fixing of LED Flood Lights fitting 50 Watts lens type LED package mounted Fixture should have minimum system lumen of 5000 lm & minimum efficiency at system level >=110 lumens/Watt, protection IP-66, life of fixture 50K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 ,Surge protection of > 5.0 KV,THD<10% @ 240V AC An operating voltage Range of 140-270V including all connection up to ceiling rose complete all as specified and directed.
M&L for opening of hole through out the wall as suitable for exhaust fan of size 300mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making good the disturbed surface and all as per site requirement complete all as specified and directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.
Supply and fixing Exhaust fan 300 mm sweep, 900 RPM, metallic body including metalic blade , single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete including taking down all as specified and as directed. Note-Old unsv Exhaust fan taking down and to be and deposited in AGE E/M store .
S&F in replacement Wall mounted fan 600 mm sweep single phase, mettalic body with all acessories complete all as specified and directed. Note-Old unsv Wall mounting fan taking down and to be and deposited in AGE E/M store .
Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with remote control, Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade, 30 cm long down road, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, with electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed, including taking down old ceiling fan and depositing to MES store yard. Make : Orient (Hector Remote) / CG (Energion Groove)/ Bajaj (Energos 26.
S & F in replacement of VTPN DB 4 Way double door vertical type for fixing MCCB 4 pole up to 250 Amps as incomer and MCBs as outgoing with metal door and IP-43 protections and connecting complete all as specified and directed.
S & F in replacement of VTPN DB 8 Way double door vertical type for fixing MCCB 4 pole up to 250 Amps as incomer and MCBs as outgoing with metal door and IP-43 protections and connecting complete all as specified and directed.
S&F in replacement of MCCB thermal magnetic electric release, fixed type, 4 pole, 160 Amps, 415 Volts with repeturing capacity 25 KA including electrical connection with incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed.
S&F in replacement of MCCB thermal magnetic electric release, fixed type, 4 pole, 100 Amps, 415 Volts with repeturing capacity 16 KA including electrical connection with incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and directed.
Supply and fix in replacement of SPN 12 Way double door mettalic DB conforming to IEC 61439-3 suitable for flush / surface mounting having 100 A copper busbar fully shrouded neutral bar earth bar wire set & cable ties for cable management pre fiited sheet etc. Having IK 09 & IP 43 protection complete all as specified in IS 732:2019 and directed.
M&L in replacement MCB TPN 'C' curve 40 Amps 415Volts , 16 KA complete all as specified and directed.
M&L in replacement MCB SPN 'B' curve 63 Amps 240 Volts , 10 KA complete all as specified and directed.
M&L in replacement MCB SP 'B' curve 06 to 32 Amps 240 Volts 10 KA complete all as specified and directed.
M&L in replacement MCB SP 'B' curve 63 Amps 240 Volts 10 KA complete all as specified and directed
S &F in replacement for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing as directed.
M & L Earth continuity conductor or main earthing lead fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire, complete all as specified and directed.
Supply & fixing of water storage heater, 5 star, Glass lined enamel coated incoloy heating element ,Digital temperature display, Feather touch buttons, Shock resistant injection moulded ABS body, IPX4 waterproof technology, Tank design is suitable to withstand 8 bar pressure (Geyser) of capacity 25 litre, , AC, electric, 230 volt, complete , 3 core lead, including PRCD Plug top, safety valve, including electric and water connection and making good to disturbed surface including taking down existing water storage heater complete all as specified and directed. Note : Existing geyser to be taken down from wall and deposit to the MES Yard for custody.
Taking down unserviceable Submain wiring of any size complete and making good disturbed surface complete all as specified and directed.
M&L for sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm, 450/1100 Volts grade on & including PVC Conduit 25 mm medium grade complete with conduit accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note :- (i) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (ii) Two runs of cable for phase & neutral and for run of cable for earth will be measured and paid as one unit length (iii) The rates are inclusive of Cutting / chasing and making good to disturbed surface with CM 1: 3 and same surface finishes with the adjoining surface of disturbed area with OBD/Colour wash /white wash complete.
Taking down and re-fixing single phase static energy meter in meter box in and including its connection complete and mounting on existing wall surface including necessary connections of incoming and out going cables. as specified and directed.
S&F in replacement Sheet metal enclosure of size 350 x300 x 150 mm suitable for mounting Single phase electric meter fabricated from 2mm thick CRCA sheet with anti corrosive dust and vermin proof including taking down meter and refix after completion of wiring work including connection with 6 Sqmm wire from DB to Meter . Note:- The meter cover shall have a fully transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover all as specified and directed.
M & L for excavation of existing LT cable of any size and taking it out from the loop floor/protection pipe and including incomer electrical connection in 4P MCCB of VTPN with suitable size of thimble complete with returning filling and make good of excavated surface / floor complete all as specified and directed.
Note for item Nos 1 to 177 :- (i) The work described in these items shall be executed in bldgs up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders etc and hessian clothes for protection & all other safety precautions up to 04 storeys of buildings and the cost for the same is deemed to be included in the quoted unit rates. (ii) Arrangement of any required machinery / tools required for removing debris from terrace to ground and then remove to outside MOD land, will be made by the contractor and the cost for the same is deemed to be included in the quoted unit rates. (iii) Removing building materials /debris / old waste unwanted existing material of any description or any type (except sch of credit materials ) etc beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates
Ish Engineers and Contractors
M/S MSD & Associate
P R Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .