REPAIR REPLACEMENT OF UNSERVICEABLE GI PIPE VALVES LIFT TANK AND OTHER CONNECTED WORK AND CERTAIN MAINT BR SERVICES FOR HIGH RISE BLDG AT CELL NO 1 UNDER GE NW NOFRA COLABA MUMBAI

Amount

Taking up or down steel /PVC tubing and connections and removing from store of following sizes, complete all as directed

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15 mm bore

Supply and fix Steel (GI) water tubing galvanised medium grade (ISI marked) of following size, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and directed.

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15 mm bore

M&L for refixing only incl cleaning of GI/pvc pipes by opening of fittings, removing mud, sludge, etc and refixing as stated above for pipes of size.

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15 mm bore

Supplying and laying in repairs of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11/ (including special fittings if any i.e. Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) fittings on walls/ceiling or laying in floors complete all as specified. Make : Astral, FINOLEX, DUTRON

Suppling and laying 16mm bore 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV (Including special fittings if any i.e. Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. Make : SFMC, RELIANCE, SUPREME

M&L for cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.

Supply and fix in repair hot water extention pipe made out of copper chromium plated 450mm long with brass adaptor and fixing in position complete all as directed.

Supply and fix in repair 450 mm long PVC connectors with brass adapters, washers etc complete all as directed.

Supply and fix in repair white rectangular PVC water storage tanks (Loft tank) of capacity following sizes with complete fitting including fixing 03 Nos tank nipples of GI with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank to store complete all as specified and directed. Make: Sintex ,Infra,Polycame.

Supply and fix in repair PVC profile suitable for PVC Loft tank of capacity following sizes including fixing aluminium channel around the profile complete all as specified and directed. Make: Rajashree,Sintex,Polycame

M&L in repairs for framed brackets of angles, joist, channel, angle or tee sections fixed independently without connecting plates etc cut to shape (cut to ordinary length i.e within 20mm of the length indicated) drilled and cuntersunk for screws, including bending and welding as necessary, confirming to fe-410-0 or fe 310-0 including including cutting holes and making after fixing of bracket and removing of old brackets and remove to store complete as specified and directed. Make: SAIL ,TATA Steel, Jindal

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Supplying and fixing in repairs brass float valve flat type, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.

(a) 25 mm bore

(b) 20 mm bore

(c) 15 mm bore

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified . Make : Zoloto, Leader, HM

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15 mm bore

Supply and fixing in repairs rotational moulded PVC tank in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings suitable up to 80mm bore GI pipe all as per existing requirements all as specified and directed. Make :Sintex ,Infra,Polycame

(a) 1000 Litres

(b) 2000 Litres

(c) 3000 Litres

(d) 5000 Litres

(e) 7500 Litres

Supply and fixing in repairs bib tap fancy type 15 mm bore ,CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed Make: Make: Essco, Hindware, Jaquar.

Supply and fixing in repair wall mixer,wall mounted with bend and over head shower all as per Make: Make: Essco, Hindware, Jaquar.

Supply and fixing in repairs over head shower rose . Make : Cat Part No. MARC MSR-1050 from MARC or equvalant in make Plumber,ESS- ESS.

Supply and fixing in repairs angular stop valve cast copper alloy ,screwed down ,high pressure or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Cat Part no. ES-513 (Essco Series) Hindware, Jaquar.

Supply and fix in repair open stop valve suitable for 15mm bore GI pipe.Make : Essco, Hindware, Jaquar.

Supply and fix in repair concealed stop valve suitable for 15mm bore GI pipe.Make : Essco, Hindware, Jaquar.

Supply and fix in repair chromium plated brass health faucet (hand shower) with 8 mm dia with 1 mtr long flexibale tube wall mounted / hooked all as per Cat Part No 573 of Jaquar or equvalent in Make Grohe, Kohler.

Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and jet spray complete all as specified.Make : Essco, Hindware, Jaquar.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge Make: Somany, Kajaria, Orient bell.

M&L for 300 X 450 X 7mm thick/300 x 200 x 7 mm th coloured glazed ceramic tiles as in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement match to existing surface ,over and including 10mm thick backing coat in CM 1:4, including dismantling complete all as specified and as directed. Make:- Somani and equivalant.

S&F sluice valve in repair replacement of size 80 mm bore class PN 1.6 ISI marked including necessary jointing material like rubber gasket joints nuts and bolts etc. Make: Kirloskar,ZolotO, Rotex

S&F in repaires 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed Make : Gem/Soma/Parko/Seiko)

S&F in repairs plastic water closet seat and covers closed pattern with flat bottom and cover and MS chromium plated or aluminised hinging device complete.

S&F Toilet paper holder along with cover of stainless steel suitable for 120mm width and 100mm depth long paper fixed to walls sample approved by GE (CAT No. JAQUAR CAT No. 1151N or Equivalant in HINDWARE / PARRYWARE

S&F white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover including connection to dron pipe and flushing pipe all as specified. Make : Jaquar ESSCO Cat Part No. ECS-WHT-551PN (P-Trap) or Equivalent in Parryware , Gerohe.

S&F soap dish Stain less steel fixed to wall all as specified in repairs complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs washers and wastes,including bedding in cement mortar to dwarf wall or including finishing cantilever brackets and connecting union to pipe over all size 915x460mm with bowl size 410mmx330mmx160mm.

S&F PVC cabinet mirror 450X300 mm x 120mm depth with 3 mm thick mirror, complete all as specified and as directed.

S&F decorative corner, 6mm thick glass self round, 300mm size with SS railing 25mm high in bath room, fixed with 'D' type brackets on walls af approved make and pattern.

S&F vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of lime concret complete all as specified and directed by Engr-in-Charge

S&F PVC low level flushing cistern including brackets 10 litre capacity , with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs. Make : Jaquar ESSCO Cat Part No. WHE-WHT-183L or Sleek essence series of Hindware or Parryware.

S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand and etc. complete all as specified and directed. Make : Jaquar ESSCO Cat part No. ECS-801 or Grohe

S&F in repairs stainless steel towel rail 20mm dia D type 60cm long between flanges .

S&F in repairs of 32mm dia PVC (flexible) waste pipe of length 900 mm complete.

S&F in repairs of 38mm dia PVC (flexible) waste pipe of length 900 mm complete.

Cleaning of loft tanks of following capacities in existing position by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning completely all as specified & directed.

(a) 150 Ltrs

(b) 270Ltrs

Supply and fixing PVC/FRP tank cover suitable followings capacities tank inl removing of old cover to store and all fixing arrangement required to fix new cover complete all as specified and directed.

(a) 2000 Litres

(b) 3000 Litres

(c) 5000 Litres

(d) 7500 Litres

Attending the complaints of air lock of GI pipes during supply hours (In early morning @ 6.00AM) & by taking down GI pipes / by using pressure pump in pipe where air lock occurred & resolve the complaint . After refix the GI pipe in the same location, complete all as specified.

Cleaning of PVC and RCC tanks on roof of following capacities in existing position by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning completely all as specified & directed.

(a) 10000 Ltrs (RCC tank)

(b) 7500 Ltrs (PVC tank)

(c) 5000 Ltrs (PVC tank)

(d) 3000 Ltrs (PVC tank)

(e) 2000 Ltrs (PVC tank)

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth POP/Putty finish as required pruning 3mm thick strictly as per manufacture instruction with smooth roller finish ,complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement). MAKE: (a) Paint : Asian paint Tractor Uno Acrylic Distemper or Berger Commando or equivalant in nerolac (b) Putty : Berger waterproofing wall putty or Asian Trucore acralyic wall putty or Birla. (c) Primer : Asian or Berger or equivalant in nerolac.

All as per item No 46 here-in-before but on ceiling.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

All as item No 48 above but one coat only

M&L Preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide primer etc complete all as specified and directed by Engeer- in charge.

M&L for rendering 15mm thick CM 1:6 on fair faces of brick work and finished even and smooth without using extra cement including taking down existing cement plaster on brick wall all as specified and directed.

M&L for rendering 10 mm thick cement plastering on brick or concrete surfaces in CM (1:4) finished even and smooth without using extra cement including taking down existing cement plaster on ceiling all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed. MAKE : Asain Pain Tractor uno or Berger Bison or equivalant in narolac

All as item No 53 above but on ceiling complete.

Taking down shutter of any description EACH exceeding 1.00 SQM but not exceeding 2.00 SQM each.

All as per item No 55 here in before but EACH not exceeding 1SQM EACH.

Taking down chowkhats or frame with shutters (without taking off shutters from frame) EACH not exceeding 1.50 SQM EACH .

All as per item No 57 here in before but EACH exceeding 1.50 SQM but not exceeding 4 SQM EACH.

Refixing the shutters exc 1 SQM but not.exc 2 SQM EACH in same opening EACH.which includes taking down easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc

S&F II class HW plain solid straight chowkat and framed wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints

S&F 40mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veeners with lipping / frame to match complete all as specified and directed.

S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for windows and ventilator as specified.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE. Make :- Rajshree, Sintex, Jain wood industries

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.

S&F hold fasts and similar small articles conforming to Fe 410-0or 310-3.

M & L for cement concrete 1:3:6 type C1 (using 20mm graded aggregate) as in hold fast block etc.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy

S&F Aluminum anodized barrel tower bolt of extruded section 200mm long

S&F Aluminium alloy anodised barrel tower bolt 100mm long.

S&F extruded aluminium alloy handle fabricated type anodized 100mm long.

S&F extruded aluminium alloy handle fabricated type anodized 125mm long.

S&F 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed. Make : Jindal or Hindalco or Deco

S&F aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed . Make : Jindal or Hindalco or Deco

S&F stainless steel butt hinges of size 100mm all as specified and directed.

S&F 75mm size stainless steel, butt hinges type B-22 complete

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads.

S&F 5.5mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads in each pane complete all as specified and as directed

S&F 3mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and as directed

S&F Aluminium wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed to Wooden / aluminium Vent/window all as specified and directed Engr-in-charge cost of wooden/ aluminium beads and neoprene included in relevant item of aluminium window) in repairs.

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer. Make:- Paint :Asian (Apcolite), Berger (Luxol), Nerolac (High Gloss) Primer:- Asian, Berger, Nerolac

S&F in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

S&F powder coated (50Micron minimum thickness) aluminum frame & shutter for door ,windows,ventilators etc.with one or more rebates including jointing cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats,glazing clips,rubber packing,anodised aluminum snap beading,screws, sliding rollers, Rubber gasket etc.compleate all as specified compleate all as specified. Note:a)Glazing shall be measured seperately. b)Item shall be paid as per weight of alluminium section.c)the rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc., as required which shall not be measured for arriving the weight.d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places scrrew all as specified

S&F 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws.

Dismantling boarding, any description, fixed in any position with nails.

M&L for 12 mm thick commercial plywood (IS), grade BWR,Type-BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges complete all as specified and directed.

-Ditto- as per item-86 but 18mm thick ply wood.-Ditto-

M&L 0.9mm thick decorative laminate type 1, of surface finish, colcur and pattern as approved, fixed with approved adhesive as per maker's instructions.

Supply and fixing Godrej night latch seven levers suitable for 35mm to 45mm thick doors in repairs.

Taking down CI pipe/AC/PVC of any dia fixed to walls.

S&F CI soil, waste pipe 100mm dia sand cast iron any length with or without ears with cement joint fixed to walll etc complete.

S&F CI soil waste pipe 75mm dia fixed in cement jointed fixed to walll etc complete all as specified.

S&F in repairs 100 mm dia sand cast CI bends (any radius) with oval access door and jointed with neat cement paste .

S&F in repairs 75 mm dia sand cast CI bends (any radius) with oval access door and jointed with neat cement paste .

S&F CI branch pieces/connector single 100mm dia in repairs.

S&F CI branch pieces/connector single 75mm dia in repairs.

S&F 160mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

S&F 160mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 100 mm dia Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) & making good all as specified & directed by Engineer In Charge

Supply and fix 75 mm dia Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) & making good all as specified & directed by Engineer In Charge

Supply and fixing mild steel in flat iron or rounded bars in available length any size including dismantling complete all as specified and directed.

M&L for DGVT vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge Make: Somany, Kajaria, Orient bell.

M & L for DGVT vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 10mm thick backing layer of CM 1:4 for laying floor finishes on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge

M & L Polished granite stone slab 16 to 18mm thick coloured as in cooking platform/door sills ,floors and vertical surfaces set and jointed with grey cement slurry including screed bed of 15mm thick in CM 1:4, and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges all as specified and as directed by EIC complete. Note : Quality of granite all as approved by GE

M&L Marble Baroda green 18 to 20 mm thick (table rubbed and polishing) as in skirting/dado/ window cills/ jambs, coocking platform,steps and risers,vertical surface over cement rendering and jointed with grey cement,over and including screed bed of 15mm thick in CM 1:4,including pointing in white cement (1:2)using marble dust with admixture of pigment to match with the shade of marble and making nosing at right angle corner as directed by Engr-in-charge complete.

Dismantling of stone slabs and tiles of any descriptionn or thickness kin floors, aprons etc.

SN CONSTRUCTION

M/s. MAYUR ENTERPRISES

Advait Enterprises

SHREE JAGDISH FURNITURE CO.