SPECIAL REPAIR TO TOILET BLOCKS OF BLDG NO P-10 (OTM) OF 70 FIELD REGT AT MENDHAR UNDER GE 881 EWS

Amount

B/R SCHEDULE

Taking down chowkhats or frame with shutter without taking off shutter from the frame n.exc 1.50 sqm each & removing from site complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm each but n.exc 4.0 sqm & removing from site complete all as specified and directed.

Pressed steel door frame of size 105 x 60 mm for door with one or more rebates including necessary fixing lugs, hinges locks strike plate etc complete all as specified and directed.

35mm thick 2nd class HW Plain, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail abd bottom rail : panelling of plain colour pvc sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

Factory made Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19X19 mm complete all as specified and as directed.

Dismantling steel window /ventilators of any size as specified and directed.

Steel windows or ventilators, with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded as specified and directed.

4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed.

G I wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture complete with beads etc. for door shutter/window shutter of any size/ type/thickness.

Butt hinges 100 mm long, heavy weight, cold rolled mild steel, and fixed complete all as specified.

Aluminium anodised,barrel tower bolt if extruded section 150mm long complete fixed with steel screws complete all as specified..

Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy complete all as specified.

Aluminium, anodised, handles 150 mm of extruded sectioncomplete all as specified.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing complete all as specified and directed..

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing complete all as specified and directed.

GI tubing 15 mm bore medium grade with all fittings fixed to walls, ceiling or laid in floors complete all as specified.

GI tubing 20 mm bore medium grade with all fitting and fixed to walls and ceilings or laid in floors complete all as specified..

GI tubing 40 mm bore medium grade with all fitting and fixed to walls and ceilings or laid in floors complete all as specified..

Pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed in repair as specified and directed.

Bib taps 15mm bore, with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair as specified and directed.

Stop cock 15 mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed down both ends for iron pipes or for unions and fixed in repair with butter fly handle.

Stop valve 15 mm bore (concealed), brass CP (fancy type long shank) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply & fixed in repair 15mm bore brass chromium plated shower rose 125mm size as specified and directed.

75 mm dia PVC (SWR) vent cowl suitable for pipes complete all as specified and directed.

PVC connection 15mm dia, 450mm long complete all as specified.

110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches all as specified and directed.

75mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches all as specified and directed.

110mm dia PVC (SWR) bends any radius all as specified and directed.

75mm dia PVC (SWR) bends any radius all as specified and directed.

75mm dia PVC (SWR) floor trap with grating incl jointing to waste pipe and fixed in cement concrete type B-1 (1:2:4) all as specified.

Supply and fix in repair High or low level PVC valveless, syphonic action type, flushing cistern, of 10 litre capacity, low level, white, with inlet, ball valve, float and handle including M S brackets suitable size and connections to pipes and fixing of chain and pull, or lever, if any as specified and directed.

Supply and fix in repair Wash basins, Vitreous China (flat back or angle back type) of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including waste pipe of 32/400 mm as specified and directed.

Supply and fix in repair for vitreous China bowl urinals (back or cornerwall type) complete including providing & fixing plugs bedding urinal against wall in cement mortar 1:2,securing urinals to plugs with &including 60mm long brass screw ,pointing around urinal back in cement, fixing PVC flushing cistern with brackets, flush pipe and waste pipe, (Ist quality) with flat back of size 465x355x265mm white with grating and unions for discharge pipe complete all as specified and directed.

Supply and fix in repair, Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including fixing in cement concret 1:4:8 type D-2 complete all as specified and directed.

Supply and fix in repair, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified.

Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) of 1000 litre capacity hoisted and fixed in position all as specified in SSR Partt-I, including dismantling existing water tank and removing complete all as specified and as directed.

40 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site rubbish off the premises complete all as specified and directed.

Glazed ceramic coloured tiles of size 450 mm x 350 mm x 7 mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

Non skid ceramic coloured tiles 7 to 8 mm thick (square/Rectagular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including cement screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

Demolition of Brick work or stone/boulder masonry, built in Cement Mortar or cement lime mortar including all quions, arches, pillars etc complete all as specified and as directed.

Brick work with old size bricks straight of curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified.

20 mm bore, Ball brass valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule and fixed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches including necessary excavation and earth work, if required all as specified and directed.

Salt glazed stone ware (SGSW) grade 'A' pipe 150 mm bore laid and jointed on cancrete bed complete including testing all as specified and as directed.

Plain cement concrete bed to drain pipes of 150mm bore in PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested , complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed

RCC 1:1.5:3 type A-1 (using 20mm graded stone aggregates) as in precast manhole covers, chajjas, canopies and deck slab etc complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates, as in coping, fixing angle iron and similar work etc (including necessary form work) complete all as specified and directed.

TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete in ground floors and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed

Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished as specified and directed.

Plain cement concrete 1:3:6 type C-1, using 20 mm graded crushed stone aggregates as in surface channel and drains, complete all as specified.

50 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in plinth protection fair finishing surface even and smooth without using extra cement complete all as specified and as directed.

Brushing neat cement slurry with 3 kg of cement per sq meter complete all as specified and as directed.

Cleaning the plastered surface of sunken floor and applying one coat of bituminous primer @ 0.25 Ltr per Sqm confirming to IS 3384-1986 all as specified.

APP (Atactic polypropylene) modified polymeric membrane, 3mm thick, of weight not less than 3.6 Kg per Sqm with 160 gm per sqm non woven polyester made at centre core reinforced and bonded completely to the surface with 75mm side overlap and 100mm overlap (the membrane has to be laid with LPG torch and overlap sealed and and finished neat) followed by another coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg / Sqm blinded with fine sand in dry condition @ 0.5 Kg / Sqm all as specified and as directed.

Priming the roof surface with bitumenous primer conforming to IS-3384 @ 0.4 litres / Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying APP (Atactic polypropylene)

M&L for filling of sunken portion with PCC 1:5:10 type E-2 complete all as specified and directed.

Taking down cement plaster from brick walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specifiedand directed.

5 mm thick cement plaster on fair faces of concrete surface finished even & smooth without using extra cement in cement mortar 1:3 on ceiling/Chajjas/roof projection(up to first floor height)etc all as specified and directed.

15 mm thick rendering in cement mortar 1:4 on stone surface, surface finished even & smooth without using extra cement complete all as specified and directed .

15 mm thick rendering in cement mortar 1:6 on stone masonry or other than fair faces of brick work, surface finished even & smooth without using extra cement complete all as specified and directed.

Preparation of old surfaces of wall and applying a coat of white wash on wall complete all as specified and directed.

Preparation of New surfaces of wall and applying two coats of white wash on wall complete all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying a coat of white wash on ceiling complete all as specified and directed..

Preparation of old plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed complete all as specified and directed.

Preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

E/M SCHEDULE

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside serviceable items for reuse with in the same bldg and removing U/S items from site.

Point wiring with Single core PVC (FRLS) insulated, unsheathed, stranderd copper conductor of size 1.5 sqmm including earth lead of 1.5 sqmm with same specification drawing in & including PVC non metalic rigid casing & caping/conduit with MS/CI sunken box of wall thickness not less than 1.6 mm including plastic laminated sheet of 3 mm thick for mounting switch, socket and regulators for one light point/fan point controlled by one switch & making good the disturbed surfaces to match with the existing specification complete all as specified & as directed.

All as per item No. 78.00 here in before but wiring with 2.5 sqmm & earth lead of 1.5 sqmm with same specification for socket out 5/15 or 6/16 Amps complete all as specified & as directed.

Switch piano flush type single pole one way 5 amps 240 volts all as specified & as directed.

Switch piano flush type single pole one way 16 amps 240 volts all as specified & as directed.

Socket out let, 6 pin 6 and 16 amps 2 in 1 flush type, 230 volts all as specified & as directed.

Ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals all as specified & as directed.

Angle Lamp holder insulated body with back plate for batten fittings and including one 9 Watt LED Bulb non dimmable B-22 cool daylight all as specified and direccted.

LED Tube light fitting, 1x 20 watts, 4T8 230 V ( poer factor not less than 0.90) box type, CRCA body, bipin holders connector block etc complete with all acessories internaly prewired, including LED lamp T8 20 W with aluminium heat shrink and connecting up with PVC insulated and sheathed flexible copper conductor cable of size 1.0 sqmm 3 core all as required at site or directed. Make Havell/Crompton/Bajaj

Sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . (Note:- MCBs will be measured separately.) Make:- Legrand Cat Pt No 607711 or equivalent in Havells/L&T/C&S

MCB single pole, 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

MCB single pole & neutral 240 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables.

Submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 4 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site or directed.

Note:- The contract sum shall be arrived after deduction of amount of Sch of credit as listed in tender Documents.

M/S KIRAN CONSTRUCTIONS

M/S BONA CONSTRUCTION