Stock storage under Jal Shakti Sub Division S/Nagar in Tehsil Jubbal Distt Shimla HP SH Repair and renovation of inspection hutt at Jal Shakti Sub Division Saraswati Nagar Distt Shimla HP

Demolation of cement plaster up to 20 mm depth including stacking of unserviceable material and disposal of unserviceable material within meteers lead.

10 mm thick cement plaster in single coat on fair sides of brick/concrete/ stone walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth and finished even smooth in cm 1:3 (cement: sand) within all leads and lifts and as directed by the Engineer-in-charge.

Cement concrete flooring 1:2:4 (cement: 2 Sand: 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement 50mm thick with in all leads and lifts as per the direction of the Engineer

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in R.S. Joists,channels, angles, tees etc. with in all leads and lifts as directed by the Engineer Incharge

Dismantelling roofing including ridges, hips, valleys,gutters, etc.stacking of serviceable material and disposal of unserviceable material within 20 metwers lead G l sheet roofing

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design.

Providing and fixing viterious China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 Cement: 1 Sand) (Seat and cover to be measured and paid separately) Ordinary Type with in all leads and lifts.

Providing & fixing plastic seat (solid / hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers. Solid type White plastic seat and cover

Providing and fixing of toilet jet with in all leads and lifts.

Providing & fixing of CP angle cock of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.

P/F C.P. Brass Bib tap with capstan head (15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.

Providing & Fixing of PVC pipe 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of PVC-union 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of PVC-Elbow 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of PVC-Tee 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of PVC-Nipple 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge

Providing & Fixing of toilet paper holder with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing and fixing in trenches 10 Kg.f/cum2 working pressure unplasticized P.V.C. pipe (Conforming to IS: 4985-1968) complete fittings (earth work in trenches to be measured and paid for separately):-

110 mm out side diameter.

Elbow 100 mm dia.

Providing & Fixing of waste pipes of 32mm with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing and supplying & Fixing Gyser complete in all respect as per direction and entire satisfaction of Engineer-in-charge.

3 Itrs. Capacity.

25 Itrs. Capacity.

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Providing and fixing of following sizes of PVC casing and capping on surface as required:

20 mmx 12 mm

25 mmx 15 mm

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required

S.P. 5/ 6 Amps one way switch, piano type

S.P. 15/16 Amps one way switch, porcelain base/ piano type.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

5 pin, 5/ 6 Amps Modular socket outlet

6 pin,15/16 Amps Modular socket outlet

Providing and fixing of emergency light (Bulb) with in all leads and lifts.

Installation, testing and commissioning of pre-wired, fluorescent light fitting/ compact fluorescent fitting of all types complete with all accessories and tubes etc. including supplying and fixing ball and socket

Providing and fixing of wall hanging shades with LED bulb holder with in all leads and lifts.

Providing & fixing panelled glazed or panelled & glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws in 2nd class deodar wood (40 mm

P/F wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56mm for doors, windows and clerestory windows including bright finished black enamelled iron hinges

Supplying & fixing glass panes with putty and nails including removal of broken glass panes wherever necessary. Plain glass (4 mm thick)

Providing and fixing 6 mm thick factory-pressed BWP (Marine) Grade plywood (IS:710) for fabrication of tables, counters, cabinets, etc., including cutting, fixing with screws/adhesive, and finishing complete as

Providing and fixing 19 mm thick factory-pressed BWP (Marine) pre laminated Grade plywood (IS:710) for fabrication of tables, counters, cabinets, etc., including cutting, fixing with screws/adhesive, and

Providing and fixing Heavy-type soft-closing telescopic drawer channels (ball-bearing) of approved make, 500 mm long, including screws, complete as per direction.

Providing and fixing catchers for cup board, complete as per direction.

Providing and fixing Stainless Steel Pull Handle (SS 304 grade), 4 inch (=100-102 mm) length, of approved make and finish (Satin/Brushed), including supply of matching stainless steel screws/fixtures, positioning, drilling (if required), fixing, alignment, and cleaning, complete as per manufacturer's specifications and as directed by the Engineer-in-Charge. (Non-Schedule Item - Market rate to be adopted)

Providing and fixing High Pressure Laminate (HPL) Sheet / Sunmica of approved colour, make and minimum thickness 0.8 mm, bonded with synthetic resin adhesive conforming to IS:851-1978, over substrate, including cutting, finishing and polishing edges, complete as per manufacturer's specifications and direction of the Engineer-in-Charge. (Non-Schedule Item - Market rate to be adopted)

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth togive final matter finish to the surface complete.

Finishing wall with water proofing cement paint of approved brand and manufacture and of requried shade on decorated wall surfaces (two coats) to give an evenshade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials complete in all respect within all eads and lifts as per direction & to the entire satisfaction of Engineer-in-

Painting two coats (excluding priming coat) of approved make on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. With readymixed paint other

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade for interior painting on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface to remove all dirt, dust and other

Painting (Two coat)on previously painted wood and wood based surface with enamel paint to give &even shade including cleaning of all dirt &dust and other foregin matter sand papering& stopping with an paint other than white.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling includingcutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)

Please Enable Macros to View BoQ information