PROVISION OF TAXI TRACK AND TWIN HANGARS AT ICGAS UNDER GE(I)CG RATNAGIRI

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II (SITE CLEARANCE, AREA DEVELOPMENT, EXCAVATION & EARTHWORK) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL ELECTRIFICATION OTHER THAN HANGAR BUILDING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V(Roads, Path & Hard standing) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (Stone Pitching) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (Area Drainage) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (Sewage Disposal) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (Fire Fighting) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (External Electric Supply) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (EXTERNAL WATER SUPPLY)) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII(LIGHTNING PROTECTION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIII (LIFTS) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIV (Refrigeration and Air Conditioning) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XV (DG SETS) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XVI(Aviation obstruction Light) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XVII (DEMOLITION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XVIII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

(b) The following electric points and fixtures shall be provided inside the hangar: 1. 3 Phase industrial socket 32 A - 20 Nos 2. 1 Phase industrial socket 20 A - 20 Nos 3. Power Point 16A/5A - 20 Nos 4. Air Circulators 450mm Sweep- 32 Nos. 5. Supply and fix of industrial plug and socket 20 Nos of 63 Amps with 4P MCB, 3 Phase +neutral and earth connection ,IP 67 protection, with necessary internal wiring and other accesories for charging purpose. (c) S& F wind driven turbo ventilators fixed each per 100 sqm (min diagonal 14.5 mtrs) of roof plan area of hanger.The turbo ventilators shall be of average capacity of 1500 to 2000 CFM with neck diameter 600-750 mm and 42 nos fins. Top plate and bottom rings shall be made of high grade stainless steel (SS-304) and fins of high grade aluminium H-140 of minimum thickness 0.71mm. The base of hopper shall be constructed with UV stabilsed FRP of minimum thickness 3 mm matching with roof sheet profile The rate shall be deemed to include fixing of FRP base alongwith ventilator and providing special leak proof tape from all sides making it totaly water tight etc. complete all as specified and driected. NOTE: (i) All item mentioned at Sl. No 18.01 & 18.02 are part of lumpsum, irrespective of availibility of such items in any other part of Schedule 'A' (ii) Lumpsum cost of Sl. No 18.01 & 18.02 shall be entered against Item No 18.01 (iii) In case of difference in Hangar size (Length, width and height) between BOQ item No 18.01 and size shown in drawing, higher size shall be taken for execution without any additional cost. (iv) During final design of Hanger, so as to ensure roof slope of 1:10 and clear opening of 11m, the ridge height may go more than 19m, for which no extra claim shall be allowed to the contractor (v) Provision of aluminium bird proofing is out of scope of above item no. 18.01 and same shall be measured and paid seperatly vide item no. 18.03 and 18.04 of BOQ

S&F anodized aluminum bird proof mesh of thickness 2mm and short way mesh (SWM) inner opening 11 mm and long way mesh (LWM) inner opening 50 mm with strand width 3 mm of size, length 6.0 m & width 1.5 m with anodizing 16-18 micron complete all as specified and directed. Note : (i)Size and thickness of mesh given above are tentative. It can be varied depending upon design and vetting from IIT/NIT/ Govt Engineering college. (ii) Design will be integral part of PEB structure (Size of mesh shall be good enough for bird proofing as decided by GE in consultation with users).

S&F supporting aluminum frame for aluminum bird proof mesh of any size and any thickness depending upon the design and vetting from IIT/NIT/ Govt Engineering College.

S & F Two way bib tap / angle cock 15 mm Make – Jaquar Model No CQT-23041 or equivalent etc complete all as specified and directed.

S & F Health faucet with flexible pipe ( ABS body ) with 01 meter long PVC tube & wall hook Make Jaquar Model No ALD-chr-573 or equivalent etc complete all as specified and directed.

DISPERSAL AREA & TAXI TRACK: (Item No 19.02 to 19.14) Rolling and consolidation formation surfaces in cutting with power roller from 8 tonne to 12 tonne complete all as specified and directed .

M&L for 200 mm thick (compacted thickness) Granular Sub Base (GSB) using 63 mm stone aggregate Grade-V (75mm -0.075mm) using natural sand, crushed gravel, crushed stone material. Surface to be laid, formed rolled using vibratory roller of min 80KN weight and consoildated to required gradient and camber as specified. Rolling to be continued till density achieved is at least 98 % of maximum dry density for the laid surface complete all as specified and directed .

M&L for WMM 150 mm thick ( compacted thickeness ) in layers of 75 mm each, using crushed graded stone aggregate of grading (53mm-0.075mm)and granular material premixed with water. Surface to be laid, formed, rolled using smooth wheeled roller of min 80KN weight and consolidated to required gradient and camber as specified.Rolling to be continued till density achieved is at least 98 % of maximum dry density for the laid surface.

M&L for 125 mm thick DLC using crushed graded stone aggregate of grading (26.5mm - 0.075mm) with 7 days compressive strength of 10 MPa with minimum cement content of 180Kg/Cum. Design mix, laying spreading and compaction using vibratory roller of minimum 80 KN weight to required gradient and camber as specified. Rolling to be continued till density achieved is atleast 98 percent of maximum dry density of the laid surface.

M&L for 10 mm thick sand cushioning all as specified and directed.

M&L for HDPE sheet, 400 micron thick laid and secured for laying PQC all as specified and directed.

M&L 200 mm thick PQC in pavement/hardstanding of flexrual strength of 45 kg/sqcm including formwork in field using non circular synthetic fibre as per manufacturers instruction by weight of cement complete all as specified (The cost of non Circular synthetice fibre shall be measured and paid seperatly rate considered seperately)

M&L for finishing concrete roads, pavements by belting all as specified and directed.

M&L for finishing concrete roads, pavements by brooming all as specified and directed.

M&L for forming 25 mm wide Expansion joint in 200 mm thick concrete pavement and filling with 25 mm thick premoulded high density filler board HD 100 as specified and provn of 30 mm dia polythene back up rod and top 15 mm primed & filled with polyurethene based sealant (backup material) over two coat of approved primer , before 30 minutes to pouring the sealant all as per manufacturers instruction . The concrete surface of the joints shall be made dry and free of dirt and vaccume cleaned by a mechanical device.The joint performance warranty shall be of 10 years etc complete all as specified and directed.

M&L for forming Dummy joints of 8mm wide and polythene back up rod of 10mm dia and top 15 mm primed & filled with polyurethene based sealant (backup material) over two coat of approved primer , before 30 minutes to pouring the sealantall as per manufacturers instruction . The concrete surface of the joints shall be made dry and free of dirt and vaccume cleaned by a mechanical device.The joint performance warranty shall be of 10 years etc complete all as specified and directed.

M&L for forming construction joints of 10 wide and 25mm depth and polythene back up rod of 12mm dia and top primed & filled with polyurethene based sealant (backup material) over two coat of approved primer , before 30 minutes to pouring the sealant all as per manufacturers instruction . The concrete surface of the joints shall be made dry and free of dirt and vaccume cleaned by a mechanical device.The joint performance warranty shall be of 10 years etc complete all as specified and directed.

Supply only non circular, virgin, synthetic, monofilament polyster fibres of length 12 - 18mm specific gravity 1.34 to1.39, UV stable, alkali resistant, equivalant diametre 15to 40 micron, minimum melting temperature 240 degree centigrade and minimum tensile strength 300Mpa as per manufacturers instructions.

M&L for thermo plastic paint White/yellow using glass beads etc complete all as specified and directed.

Supply, install, test and commission active full function repeater panel complies with EN54-2, network up to 64 panel/repeater, programmable one touch test mode, Powerfull and versatile cause and effect programming,Cause and effect wizard including:Cause and effect action,Disablement configuration, Test mode configuration 5.25 amp power supply to EN54 part 4, Large graphic display,in built help and alarm information screen, Real time clock,Stylish enclosure design,Soft touch tactile buttons 2 Programmable function buttons, 3 Programmable front panel mounted LEDs, Improved front loading printer(optional) Up to 512 Programmable inputs and output per panel via 2 wire RS485 serial link (Optional ) simple windows graphical configuration utility and IP 30 protection etc complete all as specified and directed.

Supply and installation, testing and commissioning of 2C x 1.5 Sq.mm twisted pair copper cable ISI marked with proper clamping, supports and terminations etc complete all as specified and directed..

Supply, Install testing & commissioning of foam water hand hose system consisting of following:- (a) Bladder tank- 25 Gallons capacity complete pre-piped with water piping, foam piping and foam proportioner. Complete bladder tank and water piping shall be of CS construction and Foam piping shall be of SS 304 construction. Foam vessel of bladder tank shall be as per ASME Section VIII Div.1 Pressure vessel boiler code.All the internal of bladder tank shall be of CS construction. (b) Bladder shall be constructed for Polyaramid Reinforced Duplex elastomer having a minimum tensile strength of 450kg/50mm and suitable for storage of AFFF 1% (c) Foam Proportioner rated for working pressure of 16 Bar, complete of SS 304 construction. Foam proportioner shall be of 50NB suitable for use with AFFF 1%. (d) Hose Reel made of carbon steel frame and stainless steel wetted parts. Hose shall be non-kink rubber hose suitable for working pressure of 10 Bar. Ti shall be provided with Hose of 40NB x 30 mtr Long, with one end connected to hose reel and other end fitted with Jet & Fog Nozzle having a minimum flow rate of 227 LPM. Jet & Fog nozzle shall be of anodised aluminimum construction. (e) 25 Gallons of Foam Concentrate- AFFF1%-C6

S& F Multi spectrum Quad band Triple IR fire and flame detector etc complete all as specified and directed. Make: Honeywell, model: FS24X or equivalent in Siemens/Sensidyne

Supply , Install, test & Commisioning of LT panel Board Outdoor Type 3 phase 415 V including starters for terrace pump complete with following accessories : a) MCB 4 pole 63 A (Incomming) b) MCB 3 pole 32 A 2 Nos (outgoing) c) DOL starter for terrace pump 2 Nos.

Supply and Installation testing and commisioning of 33 KV Compact Sub Station confirming to IEC:61330/62271-202 with non extensible RMU consisting of 1 No manually operated 33 KV/630 Amps VCB in SF6 insulated stainless closure,HT Cable/Bus bar ,1 No transformer 500 KVA,Copper wound , CRT dry type as per I.S 11171/1985,efficiency level II as per I.S- 1180, 33KV/433 & associated LT device ACB 800A including locking arrangement, foundation and necessary civil works including PCC platform of suitable size etc complete all as specified and directed Make. ABB /Siemens/L&T

Supply and Install SF6 gas insulated 33 KV, 630 Amps Extensible Outdoor SCADA compactable motorised Type Ring Main Unit with 200 Amps Vaccume circuit Breaker with following system particulars etc complete all as specified and directed. System Particulars:- a) Nominal system voltage:- 33 KV b) Voltage variation on supply side:- ±10% c) Corresponding Highest system voltage:- 36 KV d) Frequency:- 50 Hz e) Transient condition :- -20 % or +10% combined variation of voltage and frequency. f) Number of Phase:- 3 g) Neutral Earthing:- Solidly Earthing h) Fault level KA/sec:- 25/3 i) Lighting Impulse withstand Voltage :- 170 KVp j) Rated Dynamic withstand current for 1 sec duration :- 62.5 KAp k) Maximum Ambient Temperature 50 degree C. l) Maximum temperature in shade 45 degree C. m) Relative humidity 10 to 95 % n) Maximum annual rain fall 1450mm. o) Maximum wind pressure 150 Kg/sq.m

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured earthed , electric power cables (heavy duty) with stranded aluminium conductor, 33000 volts grade, of size 3 core 95 sq mm etc complete all as specified and directed.

Supply and fix cable jointing kit for 33 KV grade cable for out door type termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured , aluminium conductor cable of size 95 Sqmm etc complete all as specified and directed..

Supply and fix cable jointing kit indoor type for 33 KV grade cable heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured ,aluminium conductor cable of size 95 Sqmm etc complete all as specified and directed.

S & F SMC Box of 185 X 165 X 60 mm internal size with hinged door (L) with 1 No PVC connector 4 way 16 Amps and 1 No MCB SP 6 Amps including fixing bracket, nut & bolts etc complete all as specified and as directed.

Supply and fix aviation obstruction LED type of Bajaj cat No 110731 BGAV 302 LED, 240 V, with timer switch of indioasian Cat No SUL 180a and one No 10 A, MCB, SPN 230 V fixed in a hensel enclousre etc complete all as specified and directed..

S&F voltage stabilizer for single phase for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of +2.5% and of capacity 1.0KVA etc for refrigerator complete all as specified and directed.

Supply installation commissioning of refrigarator 198 Ltrs single phase 230 Volts 50 Hz single door refrigarator etc complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3.0 KVA etc complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA etc complete all as specified and directed.

Supply & installation testing and commissioning of silent Diesel Engine driven generating set 415 Volts, 3 Phase 4 wire, engine as per IS : 10001/1000/2 and alternator as per is : 13364 complete with suitable foundation, AMF,control panel with necessary meters and sound proof canopy and foundation etc, of capacity of 400 KVA continously rating at a PF of 0.8 lagging,, 415 volts AC 3 phase 4 wire 50 Hz, 1500 RPM, directly coupled with diesel engine water cooled mounted on common base frame complete with in built fuel tank (service tank) of adequate capacity with fuel line and accessories, PCC foundation work as per manufacture's instruction, etc, and comprising of following (a) Diesel Engine : Water cooled, turbo charged to deliver not less that 487 BHP at 1500 RPM under NTP conditions of BS 5514 confirming to IS and ISO 8528, BS 5514 confirming to IS 10002 DIN 6271 & ISO 3046, with an overload capacity of 10% for one hour in any 12 continuous hour operation, CELECT fuel system with A1 class electronic governing , Battery charging alternator, 2x12 V DC baterries. Alternator: Brushless type, Screen protected, revolving field, Self excited a;ternator confirming to IS/IEC 60034-1, 3 Phase reconnectable winding with 12 terminals brought out for connection. Make: M/s Cummins, Model No C 125D5P or equivalent in KIRLOSKAR/ASHOKA LEYLAND. Location: Proposed substation

Supply, install, test and commissioning MIRL type elevated LED Taxiway / Dispersal Edge light fixture (MIRL fitting) suitable for operation at 2.8 Amps to 6.6 Amps series circuit supply current complete with suitable LEDs, Omni-directional Blue lens (glass), Lens clamping mechanism, breakable coupling, rings /gaskets, base plate with 06 nos. M-10 stainless steel bolts and including an integrated encapsulated suitable electronic converter with standard secondary lead etc complete all as specified and directed.

Supply, install, test and commissioning Omni-directional, medium intensity LED taxiway inset type Edge light fitting suitable for Taxiway, Apron Edge Lights, Turning Pad Lights for operation at 6.6 Amps, series circuit supply, complete with blue lens support mechanism, lens clamping mechanism, gaskets, two pin secondary leads, including shallow base and other accessories etc complete all as specified and directed.

Supply, install, test and commissioning isolating transformer 15W 6.6A/6.6A etc complete all as specified and directed.

Supply, install, test and commissioning CI transformer housing box of size 300mmx300mm etc complete all as specified and directed.

Supply, install, test and commissioning connector kit for 1CX6 sqmm cable etc complete all as specified and directed.

Supply, install, test and commissioning primary cable 1C x 6 sqmm copper conductor XLPE insulated PVC sheathed 5KV grade cable in meters etc complete all as specified and directed.

Supply, install, test and commissioning secondary cable 2C x 4 sqmm copper conductor PCP insulated PE 1.1 KV grade flexible cable etc complete all as specified and directed.

Supply, install, test and commissioning GI wiring 8 SWG etc complete all as specified and directed.

M&L for earthing with G.I pipe 4.5m long x 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt complete as required etc complete all as specified and directed. .

M&L for laying HDPE pipes 50mm dia of pressure rating 6 kgf/sqcm fixed complete floors etc complete all as specified and directed..

Supply, install, test and commissioning constant current regulator 4KVA/6.6A etc complete all as specified and directed.

Supply, install, test and commissioning Power cable 4C X 2.5sqmm copper conductor XLPE insulated PVC sheathed 1.1 KV grade flexible cable etc complete all as specified and directed..

Supply, install, test and commissioning Guidance sign boards with transformers, connectors and CI boxes etc complete all as specified and directed.

INTERNAL ELECTRIFICATION OTHER THAN HANGAR BUILDING: (Item No 19.50 to 19.72) Supply and fixing LED lights fitting 34W recessed mounting down light , 220V, AC decorative with driver, including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc complete all as specified and directed.. Make: Havells Cat part No : SCOOP2X2PLR34WLED857S / Phillips/Wipro/Bajaj

Supply and fix surface mounted down light 10W with polycarbonate decorative housing and pressure die-cast heat sink with high efficiency with heavy duty driver having THD<10% with integral electronic driver and surge protection>5KA driver, including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc complete all as specified and directed. Make: Havells Cat part No : INTEGRANEOUSURFACEDLS15WLED857S / Phillips/Wipro/Bajaj

Supply and fixing LED Flood Light fitting 200 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with necessary fixing arrangement complete all as specified and directed. Make: Havells CAT Part No: JETAVALOURFLL200WLED757OINTWBLTG / Phillips/ Bajaj/Wipro

Supply and fixing LED Exit signage light fitting 3 Watt 230 V AC with 2 hr Battery Back up complete all as specified and directed. Make: Bajaj Cat Part No: BESL 03 LED SSD WBB Red/Havells/Wipro/Phillips

Supply and fixing LED Staircase signage light fitting 3 Watt 230 V AC with 2 hr Battery Back up complete all as specified and directed. Make: Bajaj Cat Part No: Staircase signage DSDWBB/Havells/Wipro/Phillips

Supply and fixing LED Lift signage light fitting 3 Watt 230 V AC with 2 hr Battery Back up complete all as specified and directed. Make: Bajaj Cat Part No: LiftsignageDSDWBB/Havells/Wipro/Phillips

S & F BEE five star rated energy efficient BLDC high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a down road of suitable size and electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed.

S & F energy efficient non-metallic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed.

S & F energy efficient metallic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed.

S & F Vertical triple pole & neutral, double door, 12-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 100 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed.

Supply, installation, testing and commissioning of factory made, CPRI approved, indoor cubical compartmental type LT Panel for DG Supply of suitable size, conforming to IEC 61439-1 & 2 and IEC 61641, having both sides open able with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labeling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger notice plate of 1.6 mm thick mild steel vitreous enameled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete all as specified and directed . The Panel shall comprise of the following: [A] BUSBAR CHAMBER [I] 01 Set (3L + N) of copper busbar of rated capacity 600 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [ii] LED phase indicators (Red, Yellow, Blue)- 01 Set [iii] Digital Multifunction meter with KWH and Karsh, Voltage, current, PF functions [B] OUTGOING [I] 100 A, 415 V, Ices = 100% Ice = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, Qty 1 No [ii] 160 A, 415 V, Ices = 100% Ice = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, Qty 3 No [iii] 160 A, 415 V, Ices = 100% Ice = 50 kA, 50 Hz FP MCCB, conforming to IEC 60947-2, Qty 1 No [iv] MCB 32A C curve DP Qty 2 No

S & F 100 A four pole molded case circuit breaker (MCCB), conforming to IEC 60947-2, having Ices = 100% of Ice = 36 kA, adjustable thermal setting (0.7 - 1 X In) and fixed magnetic setting with compression lug connectors and thermal magnetic trip unit (TMD) all complete as specified and directed.

S & F 160 A four pole molded case circuit breaker (MCCB), conforming to IEC 60947-2, having Ices = 100% of Ice = 36 kA, adjustable thermal setting (0.7 - 1 X In) and fixed magnetic setting with compression lug connectors and thermal magnetic trip unit (TMD) all complete as specified and directed.

S & F 40 A four pole molded case circuit breaker (MCCB), conforming to IEC 60947-2, having Ices = 100% of Ice = 25 kA, adjustable thermal setting (0.7 - 1 X In) and fixed magnetic setting with compression lug connectors and thermal magnetic trip unit (TMD) all complete as specified and directed.

S & F MCB 6 A, SP MCB, C- curve for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icon = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconvex IP 20 protected lower terminals and sliding shutters, etc. complete all as specified and directed Make: Schneider, Legrand, Havells

All as per item no. 19.64 above but 16 A, SP MCB, C- curve

All as per item no. 19.64 above but 20 A, SP MCB, C- curve

All as per item no. 19.64 above but 32 A, DP MCB, C- curve

All as per item no. 19.64 above but 40 A, TP MCB, C- curve

All as per item no. 19.64 above but 40 A, FP MCB, C- curve

Supply and fix PVC FRLS cable duct of size 100mmX50mm, fixed on wall with un slotted type non slip cover including with all accessories including fixing plug, cable tie attachment, wire retainer mounting clamp angle/corner duct, channel ports etc complete all as specified and directed

Supply and fix PVC FRLS cable duct of size 32mmX20mm, fixed on wall with un slotted type non slip cover including with all accessories including fixing plug, cable tie attachment, wire retainer mounting clamp angle/corner duct, channel ports etc complete all as specified and directed

Supply and fix PVC FRLS cable duct of size 32mmX16mm, fixed on wall with un slotted type non slip cover including with all accessories including fixing plug, cable tie attachment, wire retainer mounting clamp angle/corner duct, channel ports etc complete all as specified and directed

M&L for cutting of exisiting CI/DI Pipe line of size 150 mm to 200 mm bore with 80/100 mm brass ferrule for taking branch connection including all necessary fittings etc complete all as specified and directed.

Supply and lay (Ductile Iron)D I Pipe medium grade class 'K-9' , including specials for 150 mm dia with all fitting & accessories complete all as specified and directed.

Supply and fix Cast Iron NRV with by pass arrangement, conforming to IS 14845 of size 150 mm dia with necessary fittings complete all as specified and directed.

M&L for construction of PCC Block masonry valve pit of size 90 x 90 x90 cm (internal dimesion) complete with 40 x 40 x6 mm MS angle iron frame, 3mm thick MS Top cover with locking arrangement including two coat of black bitumionous paint over a coat of red oxide primer on steel surface including inside and out side plastering etc all as specified and directed

M&L for construction of PCC Block masonry valve pit as per of size 60 x 60 x60 cm (internal dimesion) complete with 30 x 30 x6 mm MS angle iron frame, 3mm thick MS Top cover with locking arrangement including two coat of black bitumionous paint over a coat of red oxide primer on steel surface including plastering inside and out side all as specified and directed

Supply and install Monoblock pump capacity 1 HP,240 Volt & Single phase electric driven suitable for 120 LPM at 20 mtr head , including provision of suitable PCC foundation etc complete all as specified and directed.

Supply, install test and commissioning automatic sodium Hypochlorite Dosing sytem single phase 240 V complete all as specified as directed.

Supply and fix fire alarm response indicator all as specifed and directed.

Supply and fix MS ERW 200mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint (fire red colour) over a coat of zinc chromate primer etc complete all as specified and directed.

Supply ,install , testing and commissioning motor controll centre electrical driven hydrant / sprinkler common main and jockey , deisel pump control panel 110 HP etc all as specified and directed.

B D Raizada Projects Pvt Ltd

Beejay Associates Contracts Pvt Ltd

NSC Projects Pvt. Ltd.

Jatan Constructions Private Limited