PROVN OF STORAGE ACCN UNDER PROJECT CONTINGENCIES OF RESURFACING OF RUNWAY AND ALLIED WORK SERVICES AT AFS PUNE UNDER GE (P) (AF) LOHEGAON

Amount

Surface dressing not exc 15 cm deep in soft/loose soil complete all as specified and as directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft loose soil complete all as specified and as directed by Engr-in-Charge

M&L for providing PCC 1:4:8 type D-2 (40mm graded agg) in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge .

M & L for providing RCC 1:2:4 type B1, using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, as directed including necessary form work complete all as specified and as directed by Engr-in-Charge .

M & L for Pre-cast cement concrete Type C1 1:3:6 using 20mm graded stone agggregate as in block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge .

M & L for Providing precast cement concrete type B1 1:2:4 using 20mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and Set in cement mortar 1:4 complete with joints to match complete all as specified and as directed by Engr-in-Charge .

M & L for providing RCC 1:2:4 type B1, using 20mm graded aggregate as in Slabs supported on walls, chajjas and in shelves and the like complete all as specified and as directed by Engr-in-Charge .

Formwork to chullah hoods, chajjas, troughs and similar items including edges etc rough finished surface of concrete complete all as specified and as directed by Engr-in-Charge .

S & F for providing mild steel bars TMT 10 mm dia and over cut to length bent to shape required incl. cranking bending spirally for hoop for columns ,hooking ends and binding with and including mild steel wire not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge .

Mild steel bars TMT 8 mm dia cut to length bent to shape required incl. cranking bending spirally for hoop for columns ,hooking ends and binding with and including mild steel wire not less than 0.9mm dia complete all as specified and as directed by Engr-in-Charge .

M&L for rendering 15mm thick in CM 1:6 on other than fair face finished even and smooth with thin layer of sagol complete all as specified and as directed by Engr-in-Charge .

M&L for rendering 15mm thick in two layers 10mm thick in CM 1:4 backing coat & 5mm thick in CM 1:4 finishing coat using water proofing compound finished even and fair without using extra cement complete all as specified and as directed by Engr-in-Charge .

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over & including a coat of alkali resistant priming paint complete all as specified and as directed by Engr-in-Charge .

Preparing new surfaces plastered/unplastered by brooming down etc and applying two coat of distemper oil emulsion on walls inner side over a coat of chalk whitening including cornices pilasters etc complete all as specified and as directed by Engr-in-Charge .

M& L for moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engr-in-Charge .

M&L for 100 mm thick broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick,watered and rammed to a true surface complete all as specified and as directed by Engr-in-Charge .

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm gaded stone aggregate as in sub base of floors complete all as specified and as directed by Engr-in-Charge .

Returning, filling in including spreading levelling watering well ramming in layers not exc 25 cm each layer in any type of soil complete all as specified and as directed by Engr-in-Charge .

Removing excavated material n exc 150m and depositing where directed at a level n exc 1.5m above the starting pointcomplete all as specified and as directed by Engr-in-Charge .

M & L for75 mm thick PCC Type C-2 1:3:6 using 40mm graded stone Agggregate as in plinth Protection finished surface even and smooth without using extra cement complete all as specified.

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5mm gaded stone aggregate as in sub base of floors complete all as specified.

M&L 20-25 mm thick machine cut kota stone slab in flooring laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing and laying over and including 20mm thick screed bed in cement and sand mortar 1:3 complete all as specified and as directed by Engineer-in-Charge.

M & L 20-25 mm thick machine cut kota stone slab on vertical surfaces as in skirting/riser of steps etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for coloured non skid ceramic tiles 300 x 300 x 7mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M and L for coloured Glazed ceramic tiles 300X200mmX 6-7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.

S & F pressed steel frame of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed by Engineer-in-Charge.

M&L for providing PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling in pressed steel frames complete all as specified and as directed by Engineer-in-Charge

S&F 30mm thick Flush shutters, solid core construction,with block board core or plywood face panels, commercial type on both side complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubecomplete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per complete all as specified and as directed by Engineer-in-Charge.

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised 150mm size complete all as specified and as directed by Engineer-in-Charge.

S & F 200 mm long Aluminium anodised, skeleton tower bolts with plate, staples and bolt of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces and applying two coats of synthetical enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engineer-in-Charge.

S & F Steel windows or ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engineer-in-Charge.

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe-290 (Gde E 165) complete all as specified and as directed by Engineer-in-Charge.

3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm each pane complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of new steel surfaces and applying two coats of synthetical enamel paid over a coat of red oxide complete all as specified and as directed by Engineer-in-Charge.

S & F rolled mid steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde E-250) quality A complete all as specified and as directed by Engineer-in-Charge.

S & F rolled mid steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-E-250) quality A complete all as specified and as directed by Engineer-in-Charge.

S & F Mild steel screw bolts (purpose made) Diameter of neck 16-20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long complete all as specified and as directed by Engineer-in-Charge.

All as srl item No.43 above but machine made not exc 5cm long complete all as specified and as directed by Engineer-in-Charge.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F Tubes galvanised medium grade with all fittings fixed to walls or laid in floors 15mm dia complete all as specified and as directed by Engineer-in-Charge.

S&F Tubes galvanised medium grade with all fittings fixed to walls or laid in floors 25mm dia complete all as specified and as directed by Engineer-in-Charge.

Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings, steps, cills , sunshade, shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth in stone concrete block or slab wall complete all as specified and as directed by Engineer-in-Charge.

S&F bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including all fittings complete all as specified and as directed by Engineer-in-Charge.

S&F Stop valve cast copper alloy fancy type, chromium plated with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia including all fittings complete all as specified and as directed by Engineer-in-Charge.

S&F Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 25mm dia including all fittings complete all as specified and as directed by Engineer-in-Charge.

S&F 1000 litre capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including all fittings complete all as specified and as directed by Engineer-in-Charge.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 25 mm dia iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. (Minimum weight 25mm-455gms) Make : Prayag or equivalent.

S&F Vitreous china wash down water closet pan (pedestal pattern), white excluding flushing cistern and flush pipe) including seat cover, pressure jet assembly etc complete complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC valve less, symphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets 10litres complete including flush pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Vitreous china wash basin, white flat back, size 580x450 excluding traps waste pipe fixed with brackets fixed complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Waste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end bedded in white cement and other end fixed to Waste pipe 32mm for WHB with coupling complete all as specified and as directed by Engineer-in-Charge.

S&F fancy type pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engineer-in-Charge.

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed on wall complete all as specified and as directed by Engineer-in-Charge.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-Charge.

S & F 75 mm bore PVC (SWR) vent cowl including all necessary fittings complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof fixed to 75mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S & F PVC(SWR) bends any radius 75mm bore including solvent complete all as specified and as directed by Engineer-in-Charge.

S & F PVC (SWR) junction single, (Single T) equal or unequal 75mm bore including solvent complete all as specified and as directed by Engineer-in-Charge.

S & F PVC (SWR) bend 110mm bore including solvent complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced concrete pipe, 150mm bore, class NP2, laid and jointed including concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested complete with collars laid in trenches complete all as specified and as directed by Engineer-in-Charge.

Cutting into existing manholes Internal dia of pipe in 150mm for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair face finished even and smooth without using extra cement including integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Supply only Integral waterproofing compound complete all as specified and as directed by Engineer-in-Charge.

M & L for Providing precast cement concrete type B1 1:2:4 using 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and Set in cement mortar 1:4 complete with joints to match complete all as specified and as directed by Engineer-in-Charge.

M&L for providing Cement concrete in surface channels and drains of PCC 1:2:4 type B-2 (40mm graded agg) in foundations, filling and mass concrete, including finishing using extra cement complete all as specified and as directed by Engineer-in-Charge.

S & F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Providing and fixing Gypsum board PVC laminated facing for front and aluminum foil rear side 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft loose soil complete all as specified and as directed by Engineer-in-Charge.

M&L for 25mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment complete all as specified.

M&L for Point wiring with copper conductor, single core, PVC insulated, unsheathed stranded FRLS cable (IS 694), including PVC insulated copper multi-stranded conductor cable, unsheathed, of size 1.5 sqmm and one single core earth continuity multi-stranded conductor size 1.50 sqmm green in colour to common earth and connecting to earth dolly with copper crimp of suitable size and PVC conduit accessories in walls/ Ceiling / floor etc., including MS box 2mm thick with 3mm hylum sheet cover for fixing of switches/sockets/fan regulators etc, complete all as specified and as directed by Engr-in-Charge for the following: - (a) One light point controlled by one switch with 1.5 sqmm nominal area with one single core 1.5 sqmm PVC insulated copper multi-stranded cable green in colour and connecting to earth dolly complete all as specified

(b) All as per Item No 86 but one socket outlet 3 pin 5 Amp Independent

(c) All as per Item No 86 but wiring with 2.5 Sqmm and one single core 1.5 Sqmm PVC insulated copper multi-stranded cable green in colour and connecting to earth dolly for socket outlet 15 Amp independent complete all as specified.

S&F ceiling rose surface bakelite 65x50mm three terminals complete all as specified ISI marked complete all as specified and as directed by Engr-in-Charge.

S & F one way switch 230 Volt, single pole, 5 Amps, (ISI marked),complete all as specified complete all as specified and as directed by Engr-in-Charge.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal (ISI marked), complete all as specified and as directed by Engr-in-Charge.

S & F Switch socket combination 3 pin 16A, flush type universal (ISI marked), complete all as specified and as directed by Engr-in-Charge.

Supply and fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and as directed by Engr-in-Charge.

Supply and fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and as directed by Engr-in-Charge.

S & F LED tube light fitting energy efficient complete with all accessories 1x20 watt surface and wall mounted LED Batten,extruded aluminium housing provided for efficent heat dissipation witn poly carbonate diffuser and intgrated electronic driver with & including tube rod and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified and as directed by Engr-in-Charge. Make : Havells Cat No : ENDURALINEARNEOBS20WLED830SPCWH9405 or equivalent Crompton Greaves / Philips .

S&F factory made sheet metal enclosure for distribution board (Fixed to the wall) double door, single pole and netural with 200 Amp rated bus bar, suitable for having MCB’s complete all as specified and as directed by Engr-in-Charge capacities :- (a) 240 Volt, 12 Way, SPN

S & F MCB, SPN, 240 Volt, 40 Amps, breaking capacity 10 KA, complete all as specified and as directed by Engr-in-Charge

S & F MCB, SP, 240 Volt, 5 to 32 Amps, breaking capacity 10 KA, complete all as specified and as directed by Engr-in-Charge

M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 5 of SSR (Part-I) and testing on completion, complete all as specified and as directed by Engr-in-Charge.

Supply,laying, jointing,testing and commissioning LT cable 1100 volts grade, XLPE armoured and PVC sheathed with stranded aluminium conductor heavy duty, conforming to IS 1554 (part-2)-1988 / ISI marked, including cable glands, cable lugs etc. to suit the cable size, and cables to be laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors, fixed concealed in walls encased in G.I. Pipe etc of size 3.5 X 25Sqmm complete all as specified and as directed by Engr-in-Charge. (Note : GI encasing pipes, excavation and earth work, sand cushioning and precast concrete cable covers etc, shall be measured and paid separately).

Supply,laying, jointing,testing and commissioning LT cable 1100 volts grade, XLPE armoured and PVC sheathed with stranded aluminium conductor heavy duty, conforming to IS 1554 (part-2)-1988 / ISI marked, including cable glands, cable lugs etc. to suit the cable size, and cables to be laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors, fixed concealed in walls encased in G.I. Pipe etc of size 2 X10 Sqmm complete all as specified and as directed by Engr-in-Charge . (Note : GI encasing pipes, excavation and earth work, sand cushioning and precast concrete cable covers etc, shall be measured and paid separately).

Excavation in trenchs not exc 1.5m in width and not.exc. 1.5 mtr in depth and getting out in hard/dense soil for laying of cables/pipes erection of poles complete all as specified and as directed by Engr-in-Charge.

Removing excavated materials not exc 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed by Engr-in-Charge .

M&L for supply,lay/spread in trenches, stone crushed sand,including spreading ,levelling, punning for laying/ cushioning of cable andwell ramming in layers not exc 25 cm all as complete all as specified and as directed by Engr-in-Charge. Note:- Punned thickness only will be measured

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmx 150mm x 40mm complete all as specified and as directed by Engr-in-Charge

Supply & fix LED Street light fitting 25 Watt with Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 street light with high power LEDs as light source, suitable for highlighting,epoxy powder coated finish sheet aluminium housing and impact resistance of IK07 including making connection from looping box/connector to the light fitting including fixing arragement of MS angle arragement completeall as specified and directed by Engineer -in -Charge.Make : Havells Cat No : ENDURAPEARLSL25WLED757SASYTOPCMP9405 or equivalent Crompton Greaves / Philips .

Supply and fixing for in PVC conduit submain wiring alongwith earth wire with 2x2.5 sq. mm + 1x1.5 sq. mm earth wire of FR PVC insulated copper conductor, single core cable in surface/ recessed as required street light fitting complete and suitable size of lugs and thimbles complete all as specified and as directed by Engr-in-Charge.

M&L for cutting of existing road for laying of LT Under ground cable make good depth of 600mm as per existing road and its classification complete all as specified and as directed by Engr-in-Charge.

Supply,testing and commissioning weather and vermin proof L.T. feeder pillar box (Panel board)factory fabricated out door cubicle/kiosk type totally enclosed made out of 3.0 mm thick sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 40x40x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminium complete all as specified and directed by Engineer In Charge and consisting of following:- (a) S & F copper bus bar 200 Amp with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a minimum clearance of bus bar 50 mm - 01 Set of 04 strip. (b) S&F MCCB FP 16 Amps 16 KA - 01 No for main in coming (c) Timer switch Quartz Analog daily automation for street light- 01 No (d) Contactor relays 3 pole MU 2 type for AC3 control std coil voltage 415 V,50Hz,25A rated current -01 No

Supply and laying GI tubing, 50mm dia, " light grade" ISI marked for protection of UG cable any size, laid in trenches / under road / fixed along with pole / suitable size MS clamps complete including complete all as specified and as directed by Engineer-in-Charge.

Material & labour lamp holder, PVC/Polycarbonate type back plate suitable for batten fittings complete all as specified and as directed by Engr-in-Charge.

Supply & fixing exhaust fans AC single phase 230/240 Volts of size 300mm. Sweep with louver complete all as specified and as directed by Engr-in-Charge

M/s Kirti Enterprises