Purchase of Furniture for centre of excellence facilities

Amount

Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and fixing in position Gypsum partition walls, (Gyproc make and saint gobin channels) as per drawing . Fibreglass gypsum board 12mm to be used from both sides, acoustic material rockwool insulation to be filled, Studs at 600mm centre to centre.1200mm ht gypsum board partition, 1500mm ht glass partition as per drawing (5mm thick glass) , 300mm gypsum board partition,etc

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.)

Counter Table @ 1800Lx525Dx750HT Providing & Fixing of FREE STANDING TABLE @ 1800Lx525Dx750HT:- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, BENT LEG to be CHROME FINISH as per drawing.

Counter Table @ 1500Lx525Dx750HT Providing & Fixing of FREE STANDING TABLE @ 1500Lx525Dx750HT:- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, BENT LEG to be CHROME FINISH as per drawing.

Conference Table @ 4800Lx1550Dx750HT Providing & Fixing of Main Table @ 4800Lx1550Dx750HT - made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos.

Side Table @ 600LX 600DX 415H Providing and Fixing Side Table of size 600LX 600DX 415H side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Cabin Table@ 2400LX 960DX 750H Providing and Fixing cabin table made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The table has one drawer, keyboard drawer, storage shutter, foot rest. All this is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Cabin Table @ 1500LX 750DX 750H Providing and Fixing cabin table made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The table has one drawer, keyboard drawer, storage shutter, foot rest. All this is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Cabin table@ 1800LX 600DX 750H Providing and Fixing cabin table made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The table has one drawer, keyboard drawer, storage shutter, foot rest. All this is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Cabin table @ 4500LX 600DX 750H Providing and Fixing cabin table made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The table has one drawer, keyboard drawer, storage shutter, foot rest. All this is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Cabin table @ 2100LX 600DX 750H Providing and Fixing cabin table made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The table has one drawer, keyboard drawer, storage shutter, foot rest. All this is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Cabin table @ 2400LX 960DX 750H Providing and Fixing cabin table made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The table has one drawer, keyboard drawer, storage shutter, foot rest. All this is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Cabin table @ 6500LX 675DX 750H Providing and Fixing cabin table made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The table has one drawer, keyboard drawer, storage shutter, foot rest. All this is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding

Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. (VIP chair)

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.

Providing seating chair with writing pad. The chair metal shall be powder coated folding frame with cushioned seat and back. Pad size shall be 500x350mm. Chair sixe 600x600x450mm.

Providing seating chair for canteen. Plastic moulded chairs with seating size of 500x450x415mm

Providing seating chairs. The chair metal shall be powder coated folding frame with cushioned seat and back. Chair siZe 600x600x450mm.

Providing,supplying and fixing laminate type glass (6mm plain toughen glass+1.52PVB sheet + 6mm plain toughen glass) laminate glass with silicon sealing and fixing it with pressure tape at parapet rooding wall. Make-saint gobin

Providing,supplying and fixing Projector with screen (make & model number-Epson EB-E01 XGA )

Providing,supplying and fixing glass door , 10mm toughen glass saint gobin make with floor spring dorma xlc (size of door 1200x2100mm)

Providing,supplying and fixing glass door , 10mm toughen glass saint gobin make with floor spring dorma xlc (size of door 900x2100mm)

Providing,supplying and fixing 5amp sockets for computer table. Anchor switches, polycab 1sqmm wiring with diamond make pipingf

Providing,supplying and fixing Vertical Blinds made of glass fibre fabrics in width 5” (or 4”). Minimum overlapping of ¾” in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2-inch wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock springs and self-aligning slip clutch. Stainless steel spacers. Botton weight fully plastic covered linked with plastic bead chain.

A Globia Creations