Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹49.3 L+₹2.8 L (6.06%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹53.0 L+₹6.5 L (13.9%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹54.5 L+₹8.0 L (17.3%)Rejected-Finance A 14 USHA SADAN NEAR POST OFFICE COLABA MUMBAI 05 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹60.0 L+₹13.5 L (29.1%)Rejected-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
14 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
PERIODICAL SERVICES TO INTERNAL AND EXTERNAL SURFACES OF CERTAIN BUILDINGS AND CERTAIN MISC BR REPAIRS AT OLD AND NEW RS COLABA UNDER AGE BR II OF GE NW NAVY NAGAR COLABA MUMBAI
2023_MES_594493_1
8272/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class C and Category a(i)
8 documents required · 8 mandatory
₹1,000
GE NW NAVY NAGAR COLABA MUMBAI
₹1.6 L
Yes
1 Jul 2023
10 May 2023
15 Jun 2023
10 May 2023
14 Jun 2023
31 May 2023
10 May 2023 - 7 Jun 2023
Amount
M&L for preparation of old walls surface and applying two coats of Acrylic based paint exterior grade (100% Acrylic) over a coat of primer complete as per manufactures Instructions and complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surface and applying one coat of primer & two coats of chemical waterproofing treatment (601 raincoat of Pidilite or equivalent) on plastered surfaces wall, Chajja, terrace & Parapet wall such as Flexcoat, Beckcoat Exshield etc or equivalent including filling of cracks in walls/concrete with "Crack- X" of Pidilite or equivalent complete as per manufactures Instructions complete all as specified and directed by Engr-in-Charge.
Chipping, removing carefully old broken concrete work by low impact hammer, breaker without damaging the structure & cleaning and disposal of debris out side the premises of MD land complete all as specified and directed by Engr-in-Charge. (Hard concrete should not be removed by force.)
M&L for clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem of Roff rust cleaner of Piddilite or Dr Fixit Rust removal or sholirust of STP Ltd. on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry complete all as specified and directed by Engr-in-Charge.
M&L for applying two coats of anticorrosive Treatment to Reinforcement by application of two coats of anti-rust protective coating in the form of Acrylic Polymer with a minimum solid content to 40% solid mixed with cement in 1:1.5 proportion ( 1 part polymer and 1.5 part cement) on rebars after cleaning of rust scales with time interval of minimum 4 hours between each coat by brush as per manufacturers instruction complete all as specified and directed. Anti-rust protective shall be procured from one of manufacturer given below. (Make :- Fosroc/Sika/BASF/Krishna Conchem) Note :- Measurement on the basis of area of concrete exposed.
M&L for carry out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100 on concrete surface. This inhibitor has migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete all as specified and directed by Engr-in-Charge.
M&L for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as specified and directed by Engr-in-Charge.
M&L for building up the profile of structural members by using latex B2 modified air cured mortar system in damaged areas (1Cement-3 part graded cleaned pre-packed river sand 10% latex mortar by weight of cement- 0.5 w/c ratio) upto 20 mm to 40 mm thickness including leveling profiling and removing and cleaning existing vegetation growth in structural and Non- structural items complete all as specified and directed by Engr-in-Charge. (Make :- Fosroc/Sika/BASF/Krishna Conchem)
Dismantling, Removing, Carefullly Concrete work by low impact Hammer, Breakar without damaging the structure & cleaning and disposal of malba/debris out side the premises of MD land complete all as specified and directed by Engr-in-Charge.
M&L for providing and applying jacketing around columns, beams, slabs, chajjas etc with Micro concrete (molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete all as specified and directed by Engr-in-Charge. Grade of Micro-concrete to be M-40 at 28 days and same shall be procured from one of manufacturer given below. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite). Note : Reinforcement shall be measured and paid separately Rates including jacketing, formwork and micro concrete
M&L for providing and casting in position a cement concrete mix of 1:1.5:3 using 20mm graded aggregate along with addition of non shrink admixure as in beam column, roof etc like including transporting, mixing, laying, curing, etc complete all as specified and directed by Engr-in-Charge.
M&L for providing and fixing additional steel bar or stirrups of diameter in various structural elements like columns, beams and foundations including drilling, bending and fixing the bars with epoxy putty etc complete all as specified and directed by Engr-in-Charge.
M&L for providing form work of single length to pour the conctete using waterproofing film coated ply wood complete all as specified and directed by Engr-in-Charge.
Taking down plaster (Chipping off ) removing ,carefully Loose plaster by low impact Hammer without damaging the structure and cleaning and disposal of debris out side the premises of MD land complete all as specified and directed by Engr-in-Charge.
M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work /concrete surface finished even and smooth complete all as specified and directed by Engr-in-Charge.
M&L Rendering 5 mm thick in CM 1:3 on ceiling finished even and smooth complete all as specified and directed by Engr-in-Charge.
M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement and including scaffolding, safety net etc complete all as specified and directed by Engr-in-Charge. (Note :- WPC to be mixed in setting coat only and shall be measured and paid separately)
Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
All as per item 19 above but on ceiling.
M&L for preparing newly plastered surfaces of wall, priming with alkali-resistant priming paint and applying two coats of distemper oil emulsion, white or tinted over and incl a coat of wall care putty complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surface and applying one coat of primer & two coats of chemical waterproofing treatment (601 raincoat of Pidilite or equivalent) on plastered surfaces wall, Chajja, terrace & Parapet wall such as Flexcoat, Beckcoat Exshield etc or equivalent including filling of cracks in walls/concrete with "Crack- X" of Pidilite or equivalent complete as per manufactures Instructions complete all as specified and directed by Engr-in-Charge.
M&L preparing newly plastered surfaces of walls and applying two coats of Acrylic based paint exterior grade (100% Acrylic) over a coat of primer on wall complete all as specified and directed by Engr-in-Charge.
M&L for applying one coat of distemper oil emulsion white or tinted on old decorated surfaces of wall including preparation of surface complete all as specified and directed by Engr-in-Charge.
M & L for complete removal of existing treatment, preparing old surfaces and apply one coat of alkali-resistant priming paint and two coats of distemper oil emulsion white or tinted over a coat of wall care putty on walls complete all as specified and directed by Engr-in-Charge.
M & L for cleaning of old wooden surface retrived and apply one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
M & L for cleaning of old steel surface with wire brush/gunny bag retrived and apply one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.
S&F in repairs anodised aluminium sheeting of 22 gauge thick fixed as in crumple section complete all as specified and directed by Engr-in-Charge.
Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed by Engr-in-Charge.
S&F CI soil/waste/vent pipe in any length with ears 100 mm bore (sand cast) in any length with cement joints fixed to walls with clamp complete all as specified and directed by Engr-in-Charge.
ditto - as in item 30 above but except pipe.
S&F CI bends (any radius) for soil/waste pipes 100 mm bore diminishing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge.
S&F CI branch pieces single 'Y', 'T' (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches for 100mm bore pipe with ovel access door complete all as specified and directed by Engr-in-Charge.
S&F CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls with clamp complete all as specified and directed by Engr-in-Charge.
ditto- as in item 34 above but except pipe.
S&F CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge.
S&F CI branch piececs single 'Y'.'T' (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F 75mm Cast iron vent cowls with cement joints with pipe complete all as specified and directed by Engr-in-Charge.
S&F 100mm Cast iron vent cowls with cement joints with pipe complete all as specified and directed by Engr-in-Charge.
Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to wall with clamps complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) bends (any radius) for rain water pipes 160 mm bore diminishing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge.
Demolition of lime/cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Enginner-in-Charge.
M&L cement concrete 1:5:10 E2 type with with 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engr-in-Charge.
Treatment of sunken floor slab comprises of the following specifications and all as specified (i) M&L for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely. 40 mm avg thik pcc 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding conc to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed (ii) Rendering of uneven surfaces with 6 mm thick CM 1:4 mixed with and incl integral WPC @3% of weight of cement consumed. fill it with water and check dampness and seepage. where dampness and seepage noticed nozzles shall be fixed and grouting carried out (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty
(iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear (v) M&L for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky , coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.
(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20 mm thk cm 1:4 mixed with and incl integral WPC 3 % of cement consumes as per manufacures specification including rounding of corners and junctions sloping towards spout Note:Test the water proofed area (ponding test) by filling water for atleast 72 hours and tested for leakage seepage and to the entire satisfaction of GE . Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. the treatment shall be carried out by authorised applicators of chemicals.
(vii) All pipes laid in sunken portion shall be covered with 50 mm thk PCC 1:3:6 all around after painting with anticorrossive black japan paint (viii) Height up to and including 14th floor
M&L Dismantling floor, hearth, or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M & L non skid coloured ceramic tiles 300 x 300 x 6 to 7mm in floors set and jonted in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed by Enginner-in-Charge.
M&L for glazed ceramic coloured tiles as in dado like WC, Bath, Kitchen etc of size 300 x 200 x 7mm thick set and jointed with neat cement slurry and pointed with white cement, including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed by Enginner-in-Charge.
M&L for glazed ceramic coloured tiles as in dado of size 300 x 450 x 7mm thick set and jointed with neat cement slurry and pointed with white cement, including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed by Engineer-in-Charge.
M&L in repair CI Floor trap dia of outlet 75mm with CP grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge.
S&F in repair vitreous china squatting pan 'Orissa pattern' long pan of size 580x 440mm with integral foot rests white with 'P' or 'S' with cement joint,front or back inlet incl connection to trap and to flushing pipe,anti-syphonage pipe and making good the floor to match the existingcomplete all as specified and directed by Engineer-in-Charge.
S&F in repairs for 10 ltrs capacity PVC Valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets flushing cistern and flushing pipe of suitable length, and PVC connection 450mm long complete all as specified and directed by Engineer-in-Charge.
Taking out of existing PVC cistern and refixing after tiling work with new flushing pipe of suitable length, and PVC connection of suitable length complete all as specified and directed by Engineer-in-Charge.
Taking out of existing WHB and refixing after tiling work with new bracket complete all as specified and directed by Engineer-in-Charge.
Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc complete all as specified and directed by Engineer-in-Charge.
M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Engineer-in-Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick size not less than 395x395mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Enginner-in-Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick size not less than 395x395mm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over and incliding 10mm thick CM (1:4) as in backing coat complete all as specified and directed by Engineer-in-Charge.
Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc. including removal of debries out of defence land complete all as specified and directed by Engr-in-Charge.
M&L machine cut cudappah stone 20-25 mm thick over base, laid and jonted with grey cement slurry mixed with pigment to match the shade of the stone including rubbing, polishing and necessary hole for gas pipe complete all as specified and directed by Engr-in-Charge.
M&L machine cut granite (of any type) slab 18 to 20mm thick as in like kitchen plateform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick in CM 1:6 including grinding, polishing and making necessary hole for gas pipe complete all as specified and directed by Engr-in-Charge.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Enginner-in-Charge.
S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and locking arrangement etc complete all as specified and directed by Engineer-in-Charge.
S&F aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples alu shutters complete all as specified and directed by Engineer-in-Charge.
S&F 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
M&L aluminium anodised powder coated grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-104 (10mm dia and aperture 75mm) complete all as specified and directed by Engineer-in-Charge.
S&F for machine cut kota stone slab single piece length as in jambs/cills/lintel of windows 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing (Note : kota stone single piece of Cill will be fixed in two steps) complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description n exc 1 sqm each complete all as specified and directed by Engr-in-Charge.
S & F factory made shutter 30 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing glass/gauge etc of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed by Engr-in-Charge.
M&L for two coats synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepration of surface complete as specified and as directed by Engr-in-Charge.
S & F 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge.
S&F 100 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.
S&F 100mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site complete all as specified and directed by Engineer-in-Charge.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm size stainless steel butt hinges medium weight (ISI Marked) complete all as specified and directed by Engineer-in-Charge.
S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
Removing demolished material exc 5 Km but n.exc 15 Km and depositing where directed by Engr-in-Charge.
Note: Work shall be carried out upto G+14 storey building. Rate including scaffolding and safety net cloth at places.
M/S S J CONSTRUCTION
ASHOK CONSTRUCTION
S S ENTERPRISES
satguruenterprises
RAMESH ENTERPRISES
IDEAL CONSTRUCTION COMPANY
Garima Construction Co
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .