Strengthening and Renewal of Roads in Various Colonies under the UDA Area Damaged Due to Sewerage Works. 3101

Item Code [2023 17.29.4]:Item Type [RUIDP] :: Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths full round HDPE DWC (double wall corrugated) pipes of SN8 grade as per IS 16098 (Part 2) amended upto date in trenches in complete including all material, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications, drawings and as per direction of Engineer. Note : E/w to be measured and paid separately. Length of pipe shall be measured in between the outer wall of two manholes / Inspection chambers. Pipe in the anhole/inspection chamber’s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable. 300 mm ID

Item Code [2025 11.1]:Item Type [road] ::Sub Item Code [2025 11.1 + I(i)]: Earth work in excavation for structures as per drawing and MoRTH specifications Clause304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth

Item Code [2025 3.5(iii) ]:Item Type [road] :: Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3

Item Code [2025 5.1]:Item Type [road] ::Prime Coat Sub Item Code [2025 5.1 + (i)]: Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502

Item Code [2025 5.3 ii]:Item Type [road] :: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500-7 premixed with bituminous binder ,transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade ,level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504.

Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] ::Sub Item Code [2025 UNIFIED BSR 11.4 + III (i)]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C. grade M 20 Nominal mix (1:2:4)

Item Code [2025 UNIFIED BSR 11.4]:Item Type [road] ::1Sub Item Code [2025 UNIFIED BSR 11.4 + V]: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 R.C.C. grade M 25

Item Code [2025 UNIFIED BSR 16.41]:Item Type [road] :: Sub Item Code [2025 UNIFIED BSR 16.41 + 16.41.2]: Providing and fixing of Reinforced Ferrocement Drain cover designed for class "AA" loading duly marked on cover with adequate steel reinforcement having thickness 75 mmto150 mm anti-corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc. for drain Opening Size 451 to 700 mm Standard Drain Cover Size 1000mm x 800mm x 100mm

Item Code [2025 UNIFIED BSR 5.8 MSS]:Item Type [Other] ::Sub Item Code [2025 UNIFIED BSR 5.8 MSS + By Mechanical Means A]: Mix Seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of 20mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using Viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10kN static roller and finishing to required level and grades as per MoRTH Specification Clause 508 Type A (II) Bitumen (VG-30)

Item Code [road 2025 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160"C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements.