ADHESIVE GLASS CLOTH TAPE

Special Eligibility Criteria

1. 1

   CLW reserves the right to procure entire or bulk quantities (minimum 80% of Net Procurable Quantity) from the CLW approved vendors for the item refer section-II of clause 10 of CLW BID Document Rev-V January 2026 (copy enclosed).
2. 2

   Offers of developmental vendors appearing in UVAM for tendered item (without any condition for prototype /field trail clearance) can be considered for order upto 20% of NPQ.
3. 3

   Developmental vendors appearing in UVAM (with condition for prototype/ field trial clearance) as well as Unapproved/ New firms (i.e. other than those above may be considered for small quantity developmental order) if, along with offer, they enclose required past credential of supply of same item /similar to tendered item, details of Plant & Machinery, Testing Facility, QAP, ISO Certificate and other relevant document to substantiate their capacity to develop and supply the tendered item subject to successful capacity-cum-capability assessment and completion of formalities as per the bid condition. Offers of firms on whom developmental order with capacity-cum-capability assessment and/or prototype inspection of CLW/RDSO /Other Railway is pending i.e. final prototype inspection certificate has not been issued till tender opening date, will not be considered for repeat developmental order.

   Document optionalConfirmation required
4. 4

   Where there are not more than three Indian suppliers categorized as approved vendors for a particular item, Developmental Vendors can be considered for placement of bulk order without any quantity restrictions, refer para 10.10.3.1. of CLW BID Document Rev-V January 2026 (copy enclosed)

Check List

1. 1

   In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/her bills under reverse charge mechanism [RCM] and deposit the same to the concerned tax authority.
2. 2

   All the tenderers/bidders should ensure that they are GST compliant and their quoted tax structure/rate as per GST Law.
3. 3

   Have you ensured that you have not quoted/ uploaded any commercial/ technical deviations/ financial term in place other than specified in the tender enquiry or otherwise the same will not be considered and will be ignored? Any contract placed after ignoring such financial/ commercial terms at the place other than the specified in tender enquiry will be binding on you.
4. 4

   Have you attached the certificate for percentage of local content including place of local value addition by authorized official as per the condition mentioned in the CLW BID Document Rev-V January 2026 (copy enclosed) and Public procurement policy: Make In India guidelines (copy enclosed)
5. 5

   Have you read the Public procurement policy: Make In India guidelines attached to the tender and offered bid after complying the conditions mentioned therein?
6. 6

   Have you gone through the terms and conditions mentioned in the Tender Schedule, Special Conditions of the tender if any and the CLW BID Document Rev-V January 2026 (copy enclosed)? Having participated in the tender, it will be considered that you have gone through all the conditions mentioned in these documents and the same are accepted by you.
7. 7

   Have you agreed to supply the tendered stores at the rates quoted by you in accordance with the IRS conditions of contract and in accordance with special and other conditions specified / attached with the tender?
8. 8

   Have you mentioned the percentage of local content in the relevant para of techno commercial offer form?
9. 9

   Have you attached self- certificate for percentage of local content indicating place of local value addition.
10. 10

    Have you attached relevant MSE certificate if you claim for preferential treatment as MSE?
11. 11

    Have you agreed for submission of SD as mentioned in tender condition if you are not exempted from the same as per the tender condition mentioned in CLW BID Document Rev-V January 2026 (copy enclosed)

Commercial-Compliance

1. 1

   It shall be the responsibility of the bidders to quote correct HSN number and corresponding GST rate.

   Document optionalConfirmation required
2. 2

   The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender.

   Document optionalConfirmation required
3. 3

   Are you eligible for purchase preference under Make In India Policy? If so, the necessary documents, for getting the purchase preference, to be attached.

   Document optionalConfirmation required
4. 4

   If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise [in percent of order value] with further breakup of MSE owned by SC/ST. [Information will be provided in percentage terms with 6 fields Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others].

   Document optionalConfirmation required
5. 5

   As per the extant Public Procurement Policy of the Government of India, Micro and Small Enterprises (MSEs) having current and valid UDYAM registration are entitled for benefits and purchase preferences extended to them. MSEs who are interested in availing themselves of these benefits must upload UDYAM registration certificate with their offer. New criteria for classification of enterprises based on investment and turnover vide Gazette Notification dated 20.08.2024 has been issued by Ministry of Micro, Small and Medium Enterprises. The same as amended from time to time is applicable in the tenders. In case, conditions contained in the above notification contradict with any of the tender conditions, conditions contained in the above notification as amended will prevail. Refer clause 13.0 of CLW BID Document Rev-V January 2026 (copy enclosed).

   Confirmation required
6. 6

   Have you attached self certificate for percentage of local content duly mentioning place of local value addition as per the condition mentioned in the CLW BID Document Rev-V January 2026(copy enclosed) and Public procurement policy: Make In India guidelines (copy enclosed).

   Document optionalConfirmation required
7. 7

   Annexure - A.

   Document optionalConfirmation required

8. All Tenderers claiming exemption from submitting EMD/SD, shall be equired to sign a bid securing declaration as per Annexure-A (copy enclosed). By seeking exemption of EMD/SD by the tenderer, it will be considered that the contents of Annexure A have been read and unconditionally agreed to and accepted by the tenderers.

9. 8

   EMD: - Deposition of Earnest Money as indicated in the tender schedule is mandatory failing which offer of the firm will be summarily rejected except for those tenderers who are exempted for paying Earnest Money as mentioned in para 6.0 of CLW BID Document Rev-V January 2026(copy enclosed).

   Document optionalConfirmation required
10. 9

    Micro and small Enterprises(MSEs) registered for the tendered item, vendors registered with railways for the trade group of the item tendered up to their monetary limit of registration status being valid on the date of tender closing and other vendors who qualify for exemption frompayment of Earnest Money (EMD) as per the relevant para of CLW BID Document Rev-V January 2026 (copy enclosed) and seek exemption from payment of EMD shall have to attach scanned copy of requisite documentary evidence in support of their claim alongwith offer, failing which the offer will be considered invalid, without Earnest Money and will be summarily rejected except for approved vendors. In two Packet Bidding system, such documents must be uploaded at the time of submission of techno commercial bid.

    Document optionalConfirmation required
11. 10

    Tenderers other than those who are exempted from paying Earnest Money/ in whose favour Earnest money Payment may be waived as detailed in CLW BID Document Rev-V January 2026(copy enclosed) shall be required to pay Earnest Money online through Payment Gateway facility provided on the website (using debit/credit card or internet banking) failing which, their offers shall be summarily rejected. No other mode of submission of EMD is acceptable.

    Document optionalConfirmation required
12. 11

    Security Deposit (SD): Firms must agree to furnish Security Deposit @ 5% of the value of contract, failing which offer of the firm will be summarily rejected except for those tenderers who are exempted from paying Security Deposit. Bidders (except approved vendors) seeking waiver of security deposit will have to submit requisite documentary evidence by uploading the same while submitting online bids.

    Document optionalConfirmation required
13. 12

    Warranty should be as per Specification. If Specification does not indicate any warranty condition, then it will be as per IRS Conditions of Contract.

    Confirmation required
14. 13

    The Firm shall pass on (as per section 17 (1) of CGST/SGST Act) any reduction in tax rate on supply of goods or any benefit of input tax credit to the Railway through a commensurate reduction in price without any undue delay. To the above effect the firm should give declaration that all the benefits accruing on account of change in tax rate and any additional input tax credit (ITC benefit) shall be passed on the Railways.

    Document optionalConfirmation required
15. 14

    Bidder must submit a certificate, as mentioned hereunder, 30.2 Model Certificate for Tenders: "l have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. Where applicable, evidence of valid registration by the Competent Authority shall be attached.]"

    Document optionalConfirmation required
16. 15

    Reciprocity Clause:- Entities of countries which have been identified by the nodal Ministry/Departments not allowing Indian companies to participate in their Government procurement for any item related to that nodal Ministry shall not be allowed to participate in Government procurement in India for all items related to that nodal Ministry/Department, except for the list of items published by the Ministry/Department permitting their participation. The term entity of a country shall have the same meaning as under the FDI Policy of DPIIT as amended from time to time.

    Confirmation required
17. 16

    The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address and email id). In case of a contract award, a copy of the LOA/Purchase Order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officer mentioned in the Tenderers Bid.

    Document optionalConfirmation required
18. 17

    Bidder also submit model additional certificate as mentioned in clause 30.3 section-II of CLW BID Document Rev-V January 2026.

    Document optionalConfirmation required
19. 18

    Dealers/Agents quoting on behalf of an OEM must upload Tender Specific Authorization from the OEM along with their offer as per CLW BID Document Rev-V January 2026, failing which their offers will be summarily rejected. OEMs/ Authorized Dealers/Agents must also comply conditions as per CLW BID Document Rev-V January 2026 failing which their offers are liable to be rejected without any further reference.

    Document optionalConfirmation required
20. 19

    In compliance to Public Procurement (Preference to Make in India), Order 2017 -Rev circulated vide Railway Board letter dated 02.05.2025, bidders to indicate percentage of local content and provide self certification that the item offered meets the local content requirement for Class-I local supplier and also give details of the location at which the local value addition is made

    Document optionalConfirmation required
21. 20

    Self Certification: Class I/Class II local supplier, at the time of tender, bidding or solicitation shall be required to indicate percentage of local content and provide SELF CERTIFICATION that the item offered meets the local content requirement for Class I/ Class II local supplier. The bidder shall give details of location(s) at which the local value addition is made in compliance to Railway board circular dated 2.08.2024 for Public Procurement Policy for Preference to Make in India. Please refer para 15.0 of CLW BID Document Rev-V January 2026.

    Document requiredConfirmation required
22. 21

    Bidders claiming to avail benefits and preferential treatment extended to Micro and Small Enterprises [MSEs] should necessarily enclose relevant document. Bidder may please refer the CLW BID Document Rev-V January 2026 (copy enclosed) in this regard

    Document optionalConfirmation required
23. 22

    The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms quoted anywhere else should be ignored. [Denial of this condition is not recommended].

    Document optionalConfirmation required
24. 23

    In a tender, either the authorized agent/dealer on behalf of the Principal/OEM or the Principal/OEM itself can bid, but both cannot bid simultaneously for the same item in the same tender. Further, against a particular tender, one Principal/OEM cannot issue Tender Specific Authorization to more than one agent/dealer. If an authorized agent/dealer submits bid on behalf of the Principal/OEM, the same agent/dealer shall not submit a bid on behalf of another Principal/OEM in same tender for the same item/product. Please refer to the CLW BID Document Rev-V January 2026 (copy enclosed) for detailed tender condition in this regard.

    Document optionalConfirmation required
25. 24

    Note: In case of an upward change in terms of investment in plant and machinery or equipment or turnover or both, and consequent re- classification, an enterprise shall continue to avail of all non-tax benefits of the category (micro or small or medium) it was in before the re-classification, for a period of three years from the date of such upward change. Firms claiming to avail such benefits must submit documentary evidence indicating date of upward re-classification along with the offer.

    Confirmation required
26. 25

    Tendered item is reserved to be purchased only from Class-I local supplier as per Railway Board letter dtd. 02/05/2025. In keeping with the public procurement (Preference to Make in India) order 2017, as amended, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class-I local suppliers only and the vendors who do not qualify to be class-I local suppliers should not quote in the tender as their offer shall not be considered for any ordering. In case any vendor who does not qualify to be a Class-I local supplier for the tendered item participates in the tender it does so at it's own risk and cost and railways shall not be liable for any loss or damage caused to the vendor.

    Document optionalConfirmation required
27. 26

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of offers: Offers should be valid for 120 days after the closing date of tender. Any offer having lesser validity shall be deemed as commercially unresponsive and will be summarily rejected.

2. 2

   Offer on Firm Price: Bidders must quote on firm price basis only. Offers with price variation clause [P.V.C] will be summarily rejected.