REPAIR TO BOUNDARY WALL SECURITY FENCING GATE COMPOUND WALL RCC JALI AND ALLIED WORKS UNDER AGE BR II OF GE AF ADM AREA AGRA

Amount

Taking down cement plaster of any description/ thickness on walls including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B', old size bricks, in full brick thick wall, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of alkli resistant primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groov complete as per specifications and direction of the Engineer-in-charge.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed. Note : Payment for providing grooves shall be made separately.

Dismantling of chain link fencing of any type & size complete all as specified and directed.

S&F chain link fencing of 50 mm x 50 mm x 3 mm and fixed to angle iron posts including line wires, and type to any type of standard, rails, straining bolts, etc & provn of winding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mess, size and type to any type of standard, rails, straining bolts, etc including provn of winding wire complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails braces, etc, conforming to Fe-290 Gde Fe-165 complete, drilled for fixing of steel sheeting or other covering Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastering and fixing complete all as specified and directed.

M&L for easing and adjusting of steel door/ window of any size including removing rusted forging materials and replacing brocken hinges inclding welding, greasing, oiliing complete all as directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending for weaving of chain link fencing complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good natural ground disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum in soft/ loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

S&F mild steel angle iron posts and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruring wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) as in sub base of floor/ plinth protection etc complete all as specified and directed.

M&L for providing 40 mm thick precast cement concrete (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) as in jali including all moulding, set in CM 1:4,. complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4, (using 12.50 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, exc.10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, n.exc.10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, exc.10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old surfaces kerb stone of any description, and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unrinforced) in ground floor and paving n.exc 15cm thick below or above GL complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0 (1:2:4) (using 12.50 mm graded stone aggregate) as in sub base/ levelling course complete all as specified and directed.

M&L for rubber moulded , coloured, chequred cement concrete tiles of size 250 mm x 250 mm x 22 mm thick, laid with cement slurry, jointed and pointed with grey cement and pigment as in floor/ path etc over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for machine pessed, precast, coloured, rubber moulded cement concrete interlocking tiles/ paver block of any shape and size with grey cement and pigment confirming to IS-15658 of 2006 of 60 mm thcik M 35 grade laid, jointed over & including 50 mm thick sand cusion complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick, laid with cement slurry, jointed and pointed with grey cement and pigment including rubbing and polishing over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 16-18 mm thick dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F in repair concertina coil of 1050 mm dia in stretched position hot dip galvanised steel wire coated with CLR anti corrosive paints making diamonds shape with the help of dove tail clips (18 SWG ) fixed over barbed wire with the angle iron, the concertina coil is to be fixed with barbed wire at points where coil touched the bottom points where coil touched the bottom barbed wire with the help of hog rings (24 SWG) complete all as specified and directed. Make-HMB Engg Noida/ Wire Product Mandi Govindgarh (PB)/ Chandra trading Co Ghaziabad.

S&F in repair razor wire fencing with 2.60 mm dia and 14 mm width, 0.50 mm thick razor strip fixed with clamp to angle iron or swan neck angle or to existing angle iron complete all as specified and directed. Make-HMB Engg Noida/ Wire Product Mandi Govindgarh (PB)/ Chandra trading Co Ghaziabad.

deva engineers

C P Singh and Co

Sethi Brothers

M/s Pooran Singh and Company

Asha Construction

Abhi Construction

HARI BUILDERS

garg construction company

SHRI SAINATH ENGINEERS

GUPTA ENGINEERING WORKS