Delhi

Financial Eval

Works

Civil Works

Repair and renovation work in Voter Registration Centre, AC-50, New Delhi.

Public Works Department

AC-52, Greater Kailash | South Delhi, Delhi

Amount: ₹5.6 LCloses: 27 Apr 202625 Apr 2026Closed

Timeline

Published18 Apr 2026
Closed27 Apr 2026
Technical Evaluation7 May 2026
Financial Evaluation7 May 2026
Award—

Bids

Percentage

4 Bids7 May 2026

#	Company	Amount	Rank	Status
1	Panchu Ram L1₹3.5 LAccepted-Finance	₹3.5 L	L1	Accepted-Finance L1
2	Mohd Arshad L2₹3.9 L+₹35,777 (10.1%)Accepted-Finance	₹3.9 L+₹35,777 (10.1%)	L2	Accepted-Finance L2
3	MOHAN LAL L3₹4.0 L+₹44,694 (12.6%)Accepted-Finance NEW DELHI SOUTH DELHI DELHI \| SOUTH DELHI \| DELHI \| 100017	₹4.0 L+₹44,694 (12.6%)	L3	Accepted-Finance L3
4	Bhup Chand Mahawar L4₹4.6 L+₹1.1 L (31.4%)Accepted-Finance	₹4.6 L+₹1.1 L (31.4%)	L4	Accepted-Finance L4

Corrigenda

Corrigendum

1 updatesLatest on 25 Apr 2026Submission Ends:25 Apr 202627 Apr 2026

Date changes

Download Ends25 Apr 202627 Apr 2026Submission Ends25 Apr 202627 Apr 2026Bid Opening25 Apr 202627 Apr 2026

Tender Value

₹5.6 L

EMD Value

₹11,146

Closing Date

27 Apr 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer, South Building M-422, PWD, Pol

Address

O/o Executive Engineer, PWD,Hauz Khas, ND-16

Work Description

Repair and renovation work in Voter Registration Centre, AC-50, New Delhi.

Tender Information

Tender ID

2026_PWD_290044_1

Reference Number

04EEPWDBUILDINGSOUTH2026-27

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

60 days

Location

AC-52, Greater Kailash

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical

RequiredTreasury Challan/DD/PO or BC/Deposit at Call Receipt/FDR/BB against EMD (.pdf)

RequiredGST Registration Certificate of the State in which the work is to be taken up (.pdf)

RequiredUndertaking for GST if not obtain GST registration state which the work is to be taken up as per NIT (.pdf)

RequiredScanned copy of Valid PAN Number. (.pdf)

RequiredCPWD Registration (b and r) or MES,BSNL---(as per condition no 4 specified at page 5,10 (see NIT) (.pdf)

RequiredReceipt of Deposition of original EMD. (.pdf)

RequiredUpload complete corresponding address alongwith area pin code, phone no., email id on his letter hea (.pdf)

RequiredBidders are required to upload the NIT in PDF as uploaded by EE. This will satisfy digital signing (.pdf)

RequiredApplicable licenses/registration of Labour License with EPFO, ESIC. OR undertaking (as per NIT) (.pdf)

RequiredAny other tender documents specified in nit (if any) (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹11,146

Important Dates

Last Activity

7 May 2026

Published

18 Apr 2026

Bid Opening

27 Apr 2026

Download Starts

18 Apr 2026

Download Ends

27 Apr 2026

Submission Starts

18 Apr 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (43 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
1.01	Cement mortar 1:6 (1 cement : 6 coarse sand)	-	cum	-	-
2Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
3Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
3.01	150x10 mm	-	each	-	-
4Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete.
5Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
5.01	125 mm	-	each	-	-
6Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
6.01	Twin rubber stopper	-	each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Financial Evaluation

fin_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 14.73 MB

Work Item Documents

BOQ_385068.xls

BOQ • 0.47 MB

Corrigendum Documents

4corrigendum.pdf

PDF • 0.92 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Panchu Ram

L1₹3.5 LAccepted-Finance

Mohd Arshad

L2₹3.9 L+₹35,777 (10.1%)Accepted-Finance

MOHAN LAL

L3₹4.0 L+₹44,694 (12.6%)Accepted-Finance

NEW DELHI SOUTH DELHI DELHI | SOUTH DELHI | DELHI | 100017

Bhup Chand Mahawar

L4₹4.6 L+₹1.1 L (31.4%)Accepted-Finance

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
1.01	Cement mortar 1:6 (1 cement : 6 coarse sand)	-	cum	-	-
2Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
3Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :
3.01	150x10 mm	-	each	-	-
4Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete.
5Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
5.01	125 mm	-	each	-	-
6Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
6.01	Twin rubber stopper	-	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

1.01

Cement mortar 1:6 (1 cement : 6 coarse sand)

cum

2Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

3Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

3.01

150x10 mm

each

4Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete.

5Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

5.01

125 mm

each

6Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

6.01

Twin rubber stopper

each