Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹19.9 L+₹39,738 (2.04%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹21.9 L+₹2.5 L (12.6%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹22.8 L+₹3.4 L (17.3%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹24.3 L+₹4.8 L (24.6%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
1 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW, PIN 226002, C/O 56 APO
WELCOME MAINT AND CERTAIN ALLIED WORKS IN ZONE F AREA OF AGE B/R-II UNDER GE (WEST) LUCKNOW
2024_MES_670666_1
GE/W/LKO/68 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
LUCKNOW
AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (WEST) LUCKNOW
₹90,000
Yes
6 Nov 2024
3 Sept 2024
8 Oct 2024
3 Sept 2024
1 Oct 2024
17 Sept 2024
3 Sept 2024 - 10 Sept 2024
Amount
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.
M& L for Vitrified tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
All as per item No 2 above but in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 and dismantling of existing tiles complete all as specified and as directed.
M&L for ceramic colour floor tiles shade as approved size 7- 8 mm thick area of each tile exc 0.11 but n exc 0.18 Sqm set on 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match including dismantling floor, hearth including cement mortar bedding , removing and rubbish off the premised etc complete all as specified and as directed
All as per above item No-4 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 300x450x7mm/300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L 18-20 mm thick granite stone slab, machine cut and polished as in cooking platform, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:6, including rubbing, rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges including dismantling of existing stone slabs complete all as specified and as directed.
Supply and fixing of 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc to walls and ceilings or laid in floors and testing including taking down existing GI tubing making good and complete all as specified and as directed.
Supply and fixing of 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking down existing GI tubing and making good complete all as specified and as directed.
S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and as directed.
S&F in repair of CP alloy chromium plated angle valve long body for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type complete all as specified and as directed
S&F in repair 15 mm bore CP brass Central Hole Basin mixture fixed to GI pipe complete all as specified and as directed
S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and as directed.
S&F in repair toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and as directed.
S&F in repair PVC low level white flushing cistern valveless syphonic action dule type ISI Mark with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend complete all as specified and as directed.
S&F in repair (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and as directed.
S&F in repair 5 mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and as directed.
S&F in repair 5 mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and as directed.
S & F in repairs Brass spindle for mixer/wall mixer of any type or pattern complete all as specified and as directed.
S&F in repair 20 mm bore gun metal ball stop gate valve with lever type, screwed both ends for iron pipe including testing complete all as specified and as directed.
S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and as directed.
S&F in repair CP brass tubular towel rail 20mm dia, any type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and as directed.
S & F in repair looking mirror fancy type size 600x900 mm decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and as directed.
S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and as directed.
S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers, waste coupling and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm with bowl size 410x330x160mm complete all as specified and as directed.
Supply & Fixing in repair sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and as directed
S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900x750x250 mm including screws and weight not less than 5.00 Kg complete all as specified and as directed.
S&F in repair float ball 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and as directed.
S&F in repair 18/19mm thick ply wood, grade BWP type BB quality, fixed with screw/nails to timber frame work complete all as specified and as directed.
M&L 0.90mm thick Decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
S & F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and as directed.
S & F magnet ball cateches with 8 mm dia steel bal and brass body and strike plate for cup board shutters complete all as specified and as directed
S&F 100 mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and as directed.
S&F 75mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed.
S&F in repair 25mm dia stainless steel curtain rod (weight not less than 0.20 gm/ RM) superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and as directed.
S&F in repairs of 0.36 mm dia stainless steel wire cloth (G-304) with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and as directed.
S&F in repair two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and as directed.
S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane any floor including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of oil bound distemper complete all as specified and as directed.
M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for two coats of oil bound distemper over one coat of primer over and including wall care putty on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed.
M&L for preparation of old plastered surface with wall care putty (where ever required) and over one coat of oil bound distemper complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surface of wall and applying subsequent coat of oil bound distemper complete all as specified and as directed.
Complete removal of existing treatment of wall, preparation of old plaster surfaces and applying two coat of OBD over one coat of wall care putty with primer complete all as specified and as directed.
M&L for preparation of old surface of walls and applying one coat of cement base paint complete all as specified and as directed.
M&L for preparation of old surface of walls and applying subsequent coats of cement base paint complete all as specified and as directed.
Taking down chowkhat frame with shutter (without taking out shutter from the frame) area n.exc 1.50 Sqm and removing from site complete all as specified and as directed
Taking down chowkhat frame with shutter (without taking out shutter from the frame) area exc 1.50 Sqm and n.exc.4.00 sqm and removing from site complete all as specified and as directed
S&F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50 mm thick aluminium section including joining cleat for fixing etc. complete all as specified and as directed.
S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and as directed
Supply of 0.36 mm dia stainless steel wire cloth (G-304) with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and as directed.
S&F of 4 mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in squire not exc 0.5 sqm each panes complete all as specified and as directed
S & F in repairs for mild steel (hollow/ dense any type and shapes) framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm abd soaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour including dismantling of old false ceiling and boarding any description all as per manufacture insturction complete all as specified and as directed
S & F of CI spun Hubless Pipes 100 mm bore single socketed in any length socketed in any length in trenches or in floors with shield coupling SS (304) with EPDM rubber gasket but fixed to walls including taking down old pipe complete all as specified and as directed
S & F of CI spun Hubless Pipes 75 mm bore single socketed in any length socketed in any length in trenches or in floors with shield coupling SS (304) with EPDM rubber gasket but fixed to walls including taking down old pipe complete all as specified and as directed
S & F of CI spun Hubless bends any radius 100 mm size complete all as specified and as directed.
S & F of CI spun Hubless bends any radius 75 mm size complete all as specified and as directed.
M & L of repair 100 mm dia CI any type of trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as speciifed and directed.
S & F of 100mm bore pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays or hold fast(brass/ stainless steel), including bolts and nuts and securing ends of stays to wall or roof any type complete all as specified and as directed.
Spectrum Enterprises (BID ID -3111679)
M/s Bhadoria Associates (BID ID -3111621)
M/s Chandra Mohan and Sons (BID ID -3110832)
M/S Reliance Construction (BID ID -3105663)
M/S KAUSHIK CONSTRUCTION (BID ID -3111788)
Divya Jyoti Constructions (BID ID -3111664)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .