REPAIR TO CHAIN LINK FENCING AT VARIOUS OMQS AT AF STN BAMRAULI AND OTHER SANCTION WORKS UNDER GE (AF) BMARAULI

Amount

Dismantling wrought iron work of any description not otherwise provided

Excavation in post holes ( or similar holes ) each not exc 0.5 cum , gettng out and removing the soil to a distance not exc 50 mtr complete in soft/loose soil

M&L for PCC 1:3:6, type C 2 using 40 mm graded stone aggregate in foundation and mass concrete/ filling, complete all as specifed and directed.

M&L for M.S. Works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ®

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 ®

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

S&F in repair 4 mm dia GI wire 50mm X 50mm mesh (chain link fencing) made up to mattresses or cages lapped wired and laid in position including closing and tied with angle iron properly complete all as directed.

M&L for Preparation of New or previously untreated steel and iron Surfaces of any description two coat of Black Japan paint over one coat of Red oxide over 10cm in width or girth,not otherwise described

M/L for 2 coats of synthetic enamel paint over one coat of red oxide primer incl preparation of surfaces over 10cm width or girth complete

Returning filling in including spreading levelling watering and well ramming in layers in not exc.50m (soft/loose soil)

Removing excavated surplus soil to a distance exc. 250 m & n. exc 500 m distance and deposited wherever directed.

Dismantiling of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as sfd and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6M mean radius, built in cement mortar 1:6 complete all as specified and directed

M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching including weathering slightly rounded or chamfered angles including necessary form work complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,

M&L for glazed ceramic tiles in vertical surfaces/ floor surface 300x600x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match rendering 10 mm thick in CM 1:4 on vertical surface as in backing coat all as sfd and directed.

M&L for 300x300 mmx7-8 mm thick ceramic non skid tiles in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 20mm thick screed bed in cement morta 1:6 complete all as specified and directed.

M&L for non skid Heavy duty Endura tile 300x300x10mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M&L for 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as levelling course all as specified and as directed.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any and in any position not otherwise specially provided for all as specified and as directed.

M&L for cement concrete 50 mm thick B-2 (1:2:4) (40mm graded aggregate) complete all as specified and directed

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and directed.

All as per item No. 26 above but exc. 1.5 Sqm and not exc. 4 Sqm complete all as spd & directed.

S&F Aluminium window (Powder coated ) double leaf /three leaf with anodized aluminium frame sliding/openable including wheel powder coated of section 62.5x37x2.5 mm thick shutter with bottom & middle rail of section 112.5x37x2.5mm and style & top rail of section 83x37x2.5mm thick with centrally locking arrangement with lock rail of rebate including joints cleat fixing of builders hardware fittings necessary and gazing with 5mm thick ordinary plain glass including wire mesh shutter necessary fittings fixuters & aluminium snap beads complete.

S&F mild steel framed work such as door frame, grills, grating hold fast etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar including necessary welding, drilling hole complete.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/\ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F 35mm thick single extruded WPC (Wood Polymer Composite) and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F MS flat iron as in hold fast etc and similar work incuding making shape, drilling holes etc, confriming to FE 290 Ged E-165

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in bed plate for fixing holdfast etc all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed.

Supply only butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100mm all as specified and as directed.

S&F Aluminium handles, cast type, anodised of size 150mm all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm all as specified and as directed.

S&F drapery rod 19mm inner dia (wall thickness not less than 1.60mm) stainless steel fancy type bracket fixed with rawl plug or screws on wall/beam and shall be provided with fancy finial at ends as approved by Garrison Engineer complete all as specified and directed. Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix "B" to particular specification.

S&F in curtain brackets stainless steel with matching with the curtain rod complete all as specified and directed.Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix "B" to particular specification.

S&F in door closer, hydraulically regulated, designation No 3 universal Aluminium type suitable, suitable for door shutter of 851 to 1000mm in width and of wight between 61 to 80Kg and fixed door closer, aluminium (die cast) body, all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

S&F Pre painted galvalume aluminium zinc coating GI base plain steel sheet 0.50mm thick (TCT) of an colour having minimum tensile strength of 550 Mpa as ridge in roof fixed with self tapping screws as specified in particular specifications. Note :- (i) Outer colour of sheet shall be as approved by GE based on availability from manufacturer. (ii) Work shall be executed by the manufacturer's authorised Vendor only.

S&F mild steel tubular section as in post / column / strut etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240.

M&L for Cement concrete in walls or retaining walls ,Type B2(1:2:4) 40mm graded stone aggregate any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases)

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for preparation of new wall surfaces of wall and applying two coat oil bound distemper over a coat of alkali resistant cement primer complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coat of ACE paint complete.

M&L for preparation of new wall surfaces & applying three coat white wash on new ceiling surfaces complete. all as specified and directed.

M&L for complete removing of existing treatment on wall surface and applying two coat of OBD over 3 mm thick birla white care Putty on wall to obtain smooth finish etc complete all as specified and directed.

M & L for preparation of old decorated surface of wall, roof or sheet any type and applying two coat of ACE exterior emulsion paint (Asian Paint) complete all as specified and directed

M&L for two coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as sfd and directed.

M&L for Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer

S&F Floor door stopper of aluminium alloy body and tounge anodised,with hard drawn steel spring, with overall length of cover plate 140mm

S&F in repair rubber bead for wooden door complete all as specified and directed.

Surface excavation not exc 30 cm avg 15 cm thick and getting out in loose/soft soil

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified as directed.

M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc complete all as specified as directed.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block rubber moulded and coloured pattern any shape and size confirming to IS 15658-2006 of M-35 with coloured cement and pigment complete all specified and directed.

M&L for Sand filling under floors or foundations including watering and consiladition complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of ACE over a coat of 1.5mm thick wall putty complete all as spd & directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) type C-2 using 20mm stone agg as in sub base/ flooring complete all as specified and directed.

S&F for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary ccessories & stainless steel dash fasterners, stainless steel bolts etc. of required size, on the tip of floor or the side of waist slab with suitable arrangement

M&L for 100mm thick cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor complete all as specified and directed

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

Minakshi Construction (BID ID -3067187)

ASHWANI BUILDERS & SUPPLIERS (BID ID -3059059)

Abhinav Builders (BID ID -3050326)

VIPUL CONSTRUCTIONS (BID ID -3050699)

Aditi Construction Company (BID ID -3051075)

Toshi Enterprises (BID ID -3049059)