Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.9 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹27.6 L+₹3.6 L (15.2%)Rejected-Finance 303 GHS 888 SECTOR 20 PANCHKULA 134116 HARYANA | PANCHKULA | PANCHKULA | HARYANA | 134116 | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹33.5 L+₹9.6 L (39.9%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L-3 | Rejected-Finance L-3 |
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
12 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE (AF) Bhisiana
HQ CWE (AF) Bhisiana
PROVISION OF STANDBY POWER SUPPLY TO CERTAIN CRITICAL INSTALLATIONS AT AF STATION BHISIANA
2024_MES_642547_1
CWE(BHI)/BHI-52/2023-24
Open Tender
Civil Works
Item Rate
183 days
Bhisiana
As per tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Bhisiana
₹49,000
Yes
28 Mar 2024
15 Feb 2024
14 Mar 2024
15 Feb 2024
12 Mar 2024
29 Feb 2024
Amount
Supply, installation, commissioning and testing of Silent Diesel Engine driven generating set 35 KVA, 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having standard fittings and sound proof canopy with Noise level is 75 dB (A) at 1 meter distance as per latest CPCB-IV norms specified by CPCB, with new PCC foundation as per manufacturer recommendations complete all as apecified and directed by Engr-in-Charge. (a) 35 KVA D.G. Set Comprising of vertical Water Cooled Diesel Oil Engine developing 42 BHP @1500 RPM close coupled to 35 KVA, Three Phase, 415 Volt, 0.8 power factor,single bearing Brushless Alternator complete with Battery , Fuel Tank & CPCB approved canopy . The detailed scope of supply is as under : A. DIESEL ENGINE COMPRISING OF :- (i) Class A 1 Governor (ii) Battery charging Alternator (iii) Engine Safty Sensors( LLOP & HWT) (iv) Air cleaner (v) Lube oil Filter (vi) Fuel filter (vii) Fuel tank (viii) Residential silencer (ix) 01 No 12V battery with battery leads (x) First fill of lube oil and coolent B. ALTERNATOR : Alternator of 35 KVA at 1500 RPM at 0.8 lagging power factor , 415 Volts 50 Hz, suitable for Three Phase system. The alternator shall confirm to IS: 4722/BS: 2613 and will be suitable for standard ambient condition.
C. DIGITAL CONTROL PANEL : The Digital Manual Control Panel is equipped with 16 bit high speed RISC Processor based Sedemac controller, with display of following parameters :- Voltage , frequency , Current, RPM, Comulative hours run, Oil pressure, Coolent temp, charging voltage etc. The Secmac provides following safety to the engine against :- Under & over Voltage, Under & over frequency, under & over speed, overload, Low Lube Oil Pressure, High coolent temperature, emergency OFF, with Battery charger 12V, DC-2.5A complete all as specified and directed by Engr-in-Charge. Notes for BOQ item No. 1.00 & 1.01 :- (i) The rate for making foundation for DG set as per recommendation by manufacturer's and the cost of excavation, brick work, concrete, steel etc. shall be included in the quoted rate. The drawing for foundation as per manufacturer's design shall be approved by GE. (ii) The drawing and detailed specification of DG set shall be approved by Accepting Officer as & when requested by contractor before placing order to manufacturer. (iii) Pre commissioning test for DG Set shall be carried out by the representative of the Accepting Officer as & when requested by the contractor.
Supply, installation, commissioning and testing of Silent Diesel Engine driven generating set 35 KVA, 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete, control panel standard fittings and sound proof canopy with Noise level is 75 dB (A) at 1 meter distance as per latest CPCB-IV norms specified by CPCB and Mounting on 04 wheels MS trolley which is suitable for carrying 5 Ton load, also having 04 Nos screw type jack on 04 corners of trolley to lift the trolley upto to height to becomes all 04 wheels/tyre free and having toeing facility with TATA moblie/Tractor/Eicher or any other vehicle etc. complete all as apecified and directed. (a) 35 KVA D.G. Set Comprising of vertical Water Cooled Diesel Oil Engine developing 42 BHP @1500 RPM close coupled to 35 KVA, Three Phase, 415 Volt, 0.8 power factor, single bearing brushless Alternator complete with Battery , Fuel Tank & CPCB approved canopy. The detailed scope of supply is as under : A. DIESEL ENGINE COMPRISING OF :- (i) Class A 1 Governor (ii) Battery charging Alternator (iii) Engine Safty Sensors( LLOP & HWT) (iv) Air cleaner (v) Lube oil Filter (vi) Fuel filter (vii) Fuel tank (viii) Residential silencer (ix) 01 No 12 V battery with battery leads (x) First fill of lube oil and coolent
B. ALTERNATOR : Alternator of 35 KVA at 1500 RPM at 0.8 lagging power factor , 415 Volts 50 Hz, suitable for Three Phase system. The alternator shall confirm to IS: 4722/BS: 2613 and will be suitable for ambient condition. C. DIGITAL CONTROL PANEL : The Digital Manual Control Panel is equipped with 16 bit high speed RISC Processor based Sedemac controller, with display of following parameters :- Voltage , frequency , Current, RPM, Comulative hours run, Oil pressure, Coolent temp, charging voltage etc. The Secmac provides following safety to the engine against :- Under & over Voltage, Under & over frequency, under & over speed, overload, Low Lube Oil Pressure, High coolent temperature, emergency OFF, with Battery charger 12V, DC-2.5A complete all as specified and directed by Engr-in-Charge. Notes for BOQ item No. 2.00 & 2.01 :- (i) The drawing and detailed specification of DG set shall be approved by Accepting Officer as & when requested by contractor before placing order to manufacturer. (ii) Pre commissioning test for DG Set shall be carried out by the representative of the Accepting Officer as & when requested by the contractor.
Supply and fixing ON LOAD change over switch 415V in sheet metal enclosure 4 pole of capacity 63Amps complete duly fixed on moveable trolley complete all as specified and directed by Engineer-in-Charge.
Supply, laying, testing and commissioning of XLPE, LT UG cable, 1100 volts grade, PVC insulated, PVC unsheathed armoured with aluminum conductor cable complete including lugs of cross sectional area of cable 35 Sqmm 3.5 core in trenches/ ducts, fixed on walls/panels including taking down old unserviceable cable complete all as specified and directed by Engineer-in-Charge.
Supply, laying, testing and commissioning of XLPE, LT UG cable, 1100 volts grade, PVC insulated, PVC unsheathed armoured with aluminum conductor cable complete including lugs of cross sectional area of cable 25 Sqmm 4 core in trenches/ ducts, fixed on walls/panels including taking down old unserviceable cable complete all as specified and directed by Engineer-in-Charge.
Excavation in trenches not exc 1.5mtr wide and not exc 1.5mtr in depth for laying of cable etc not exc 10 sqm on plan and getting out, in soft/loose soil complete all as specified and as directed.
Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm thick each complete all as specified and as directed.
Removal of surplus soil to a distance not exc 500 mtrs & depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified and as directed.
Supply and spreading of natural, clean, dry river sand in trenches for cable protection/ transformer yard/ two pole structure yard etc complete all as specified and as directed. Note : Punned thickness only shall be measured and paid.
Material and labour for sub class B, burnt clay, brick of size 230mm x 115mm x 70mm for cable protection and gap between adjacent cover not exceeding 10mm complete all as specified and as directed.
Supply and fixing of 50mm bore GI tubing light grade as in protection pipe for cable road crossing/ on pole/ walls/ plinth or similar position including all fittings sealed with both ends after laying the cables including taking down old GI tubing complete all as specified by Engineer-in-Charge.
Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried directly in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to GI earth lead strip 32x6 mm for earh electrode upto test point or upto 7.5 mtrs whichever is less by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including GI watering pipe 20 mm bore, light grade including protection pipe GI medium grade 40mm bore , wire mesh, funnel,lugs, salt, charcoal dust, necessary excavation, earth work of any type of soil and refilling pit chamber with PCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates , RCC 1:2:4 type B-1 using 20 mm graded mechnically crushed stone aggregates pit cover slab 50 mm thick reinforced with 8 mm dia TMT bars @ 10 cm c/c both ways including necessary form work all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion and removal of soil to a distance not exceeding 50 m etc complete all as specified and as directed.
Material and labour for flexible copper 4 x strip of size 25x3mm and 12 mtrs length of each as moveable earth strip for trolley mounted DG set , strip one end is properly/ permanent fixed with 02 Nos DG Set body and 02 Nos DG set neutral and other end of copper strip is fixed with 48 mm dia and 10 feet long copper rod earth electrod to provide proper earthing to Moveable DG set where ever DG will be connected as and when required complete all as specified and directed by Engineer-in-Charge.
R D Bansal
M/s Luxmi Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .