Tiruppur Corporation_GF_Maintenance Special Repairs Overhauling Servicing Chettipalayam MCC Shredder machine bearings rollershaft Hopper MS box Vengamedu step belt replacement conveyor mechanical roller gear box Rectifications composite centre wn 9

Dismantling and assembling the chettipalayam shredder machine's conveyor assembly, prime mover assembly including cost of labour charges for proper mechanical alignment free from vibration, transportation charges, incidental charges inclusive of material charges if any complete the work satisfaction of department officers etc, complete standard specifications.

Removing and Reconditioning of damaged cutting Blades, grainding worned out Blades in shredder machine SS 308 of shredder machine assembly etc, complete standard specifications.

Providing shredder machines shaft bearings with housing , bolts and nuts with instant works etc, complete standard specifications.

Providing shredder machines shaft pullies and belts to both sides of shredder machine assembly etc, complete standard specifications.

Providing shredder machine 4 x 2 , 3 mm thick mesh post shredding of vegitable wastes with fixing , weldings etc, complete standard specifications.

Shredder machine double Frame work for the hopper and covers, MS square tube with welding and fixing work top and bottom sides including labor charges etc, complete standard specifications.

Removal of Damaged side wall secondary shredder 600mm X 6 M conveyor step belt and providing good quality rubberised 2 ply mechanical strength accrut type conveyor belt having thick of 3mm 2 ply with valcanising /pasrned which is mechanical durability etc, complete standard specifications.

Provision of Step belt conveyor roller shaft assembly bearings in conveyor mechanicaal assebly etc, complete standard specifications.

Labor charges for Fixing of side wall belt in step coveyor assembly with welding with ms plates including cost of trasnportation etc, complete standard specifications.

Supply and fixing Solid PVC door shutters with frame using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rebate for housing the shutter etc., complete complying with standard specification.